Question about Cars & Trucks

1 Answer

"I tore down my 2005 Hyundai Santa Fe 3.5 engine and my son decided to clean the garage. In doing so, the camshafts were placed in a box in no order. There are several numbers on each camshafts. Also, which side is left and right? Firewall side left? Right? Please help. Thank you, Leo, Tomball, tx"

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 44,530 Answers

Looking from the water pump end the side on the fire wall will be the LHS. You can distinguish which cam is which by placing the cam in position and seeing if the cam lobe is over a valve. If the lobe is over an inlet valve (inlet manifold hole then it will control the inlet valves an so on for the exhaust cam. Before you place the cams in position make sure that you have the no 1 piston on top dead centre with the timing marks positioned correctly and do not touch the crankshaft again as the timing will all be done by the positioning of the cam shafts.

Posted on Nov 16, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Fog Light Replacement Hyundai Santa Fe

The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.

Posted on Apr 06, 2009

goalie39
  • 469 Answers

SOURCE: ''check engine light'' illuminated, 1004 Hyundai, Santa Fe

If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.

Hope this is of some help.
Ed

Posted on Apr 21, 2009

emissionwiz
  • 76682 Answers

SOURCE: PROGRAM KEYFOB FOR HYUNDAI SANTA FE

This is from the factory service manual of your car:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.

Posted on May 22, 2009

emissionwiz
  • 76682 Answers

SOURCE: 2005 hyundai santa fe check engine light on...

Definition of P0171 is Applied to All Manufacturers Powertrain: System Too Lean Bank 1
Definition of P0174 is Applied to All Manufacturers Powertrain: System Too Lean Bank 2

Posted on Nov 03, 2009

c17hydro
  • 2984 Answers

SOURCE: where is located the engine number of a hyundai

Location diagram of various component’s serial numbers


b0c9f2a.gif

Posted on May 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the starter located on a 2006 hyundai santa fe


Made a video show how I replaced the starter on my 2005 Hyundai Santa Fe. Should be in the same place.

Jan 31, 2015 | 2006 Hyundai Santa Fe

1 Answer

How do identify the four camshafts on 2005 Santa Fe 3.5 engine


my hyundai santa fe (03) has 2 fuses 1 for each side of vehicle

Oct 05, 2013 | 2005 Hyundai Santa Fe

1 Answer

2005 hyundai santa fe 2.7 crankshaft position sensor location


On a 2005 Santa Fe with a 2.7 L engine it is located on air breather side. Air breather needs to be removed to get to it.

Jul 25, 2012 | 2005 Hyundai Santa Fe

2 Answers

Hyundai santa fe starter were is it located


On the 3 different engines (4 cyl & both V6s) on LH side (radiator side) below the exhaust manifold. All have two14mm bolts mounting them to the engine.
ILLUSTRATION:


ghost45_24.jpg

ghost45_25.jpg

ghost45_26.jpg

Aug 27, 2011 | 2004 Hyundai Santa Fe

2 Answers

Where is the starter located on a 2006 santa fe..is it easy to get to?


You will be finding the starter motor at the mounting point of Engine & transmission case towards the bottom, above the crank case. you will able to access to this motor from bottom.

Jun 04, 2010 | 2001 Hyundai Santa Fe

1 Answer

Where is the cam a sensor located in a 2004 hyundai santa fe


On the 2.4L and 2.7L engines, the camshaft position sensor is located on top of the engine near the ignition coils. On the 3.5L engine, the sensor is located at the front of the engine near the camshaft gear.


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Jul 03, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...