Question about Renault Cars & Trucks

Open Question

Airbag system DF-183

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Renault megane 2006 has airbag light on and the codes are DF077, DF 182 and DF183 please answer


Look under both front seats and you will see thin wiring with yellow or orange plugs secured to underside of seat. Undo the plugs, spray with contact cleaner and plug back together. Usually puts light off too.

Feb 21, 2015 | 2006 Renault Megane 1.6

1 Answer

Print Email Problem with Toyota Cars & Trucks How to off airbag light Say on my airbag how to off What's your problem?


The light for the Airbag/SRS system is on because the system control module has sensed a fault and turned off the airbag SRS system. What you must do now is have a scan done of the airbag module to see what fault codes show up in the airbag modules memory.

Jun 28, 2012 | Toyota Cars & Trucks

1 Answer

I need the torque specs for replacing the valve cover gasket on a 2001 chevy cavallier 2.2 liter 4cly. thanks


This should do the trick, torque to specs then additional 90 degrees turn on all bolts

2483.gif
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


  • Use the following sequence in order to tighten the cylinder head bolts: Tighten
    1. Tighten bolt 1 to 63 N·m (46 lb ft).
    2. Tighten bolt 2 to 58 N·m (43 lb ft).
    3. Tighten bolt 3 to 58 N·m (43 lb ft).
    4. Tighten bolt 4 to 63 N·m (46 lb ft).
    5. Tighten bolt 5 to 63 N·m (46 lb ft).
    6. Tighten bolt 6 to 58 N·m (43 lb ft).
    7. Tighten bolt 7 to 58 N·m (43 lb ft).
    8. Tighten bolt 8 to 63 N·m (46 lb ft).
    9. Tighten bolt 9 to 63 N·m (46 lb ft).
    10. Tighten bolt 10 (stud bolt) to 58 N·m (43 lb ft).
    11. Then tighten all bolts an additional 90 degrees
  • Jun 28, 2011 | 2001 Chevrolet Cavalier

    1 Answer

    My 06 ford fusion airbag light comes on and stays on


    Airbag systems should never be worked on by consumers who are not professionals with the Airbag system. You will need to take the vehicle in to the dealership to have the Airbag system professionally serviced, and to avoid problems with your insurance company. Airbag systems are very delicate, and consists of crash sensors in various points on the vehicle, as well as a system of wires, and an Airbag computer module. Usually the Airbag light comes on if the system has been activated, or become faulty. Once again, never work on the Airbag system yourself, take it to the dealership to have it serviced.

    Mar 14, 2011 | 2006 Ford Fusion

    1 Answer

    How to replace the multifunction switch of a 2006 Dodge Ram


    REMOVAL
    WARNING: To avoid serious or fatal injury on vehicles equipped with airbags, disable the Supplemental Restraint System (SRS) before attempting any steering wheel, steering column, airbag, seat belt tensioner, impact sensor, or instrument panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the SRS. Failure to take the proper precautions could result in accidental airbag deployment.

    1. Disconnect and isolate the battery negative cable.
    2. Remove the screw (2) that secures the tilt steering column knob (1) and remove it from the tilt actuator (3) on the left side of the column.
    3. From below the steering column, remove the two outboard screws that secure the upper column shroud (1) to the lower shroud (3).
    4. Using hand pressure, press inward on both sides of the upper shroud above the parting line of the lower shroud to release the snap features that secure the two shroud halves to each other.
    5. Remove the upper shroud from the lower shroud and the steering column.
    6. Remove the one center screw that secures the lower shroud to the steering column (4).
    7. Remove the lower shroud from the steering column.
    8. Disconnect the wire harness connector (2) from the back of the multi-function switch housing (1).
    9. Rotate the steering wheel far enough to access and remove the two screws (4) that secure the switch to the multi-function switch mounting housing (3).
    10. Grasp the switch control stalk and pull it toward the left side of the vehicle to remove the switch from the mounting housing.

    INSTALLATION
    1. Slide the multi-function switch (1) into the multi-function switch mounting housing (3) from the left side. Be certain that the alignment pins on the top and bottom of the switch are properly engaged in the channels of the mounting housing.
    2. Rotate the steering wheel far enough to install and tighten the two screws (4) that secure the switch to the mounting housing. Tighten the screws to 2 N·m (20 in. lbs.).
    3. Reconnect the wire harness connector (2) to the back of the switch housing.
    4. Position the lower shroud (3) onto the steering column (4).
    5. From below the steering column, install and tighten the one center screw that secures the lower shroud to the steering column. Tighten the screw to 2 N·m (20 in. lbs.).
    6. Position the upper shroud (1) onto the steering column over the lower shroud. On vehicles equipped with an automatic transmission, be certain to engage the gearshift lever gap hider into the opening in the right side of both shroud halves.
    7. Align the snap features on the upper shroud with the receptacles in the lower shroud and apply hand pressure to snap them together.
    8. Install and tighten the two outboard screws that secure the upper shroud to the lower shroud. Tighten the screws to 2 N·m (20 in. lbs.).
    9. Position the tilt steering column knob (1) onto the tilt adjuster actuator (3) on the left side of the steering column, then install and tighten the screw (2) to secure the knob to the actuator. Tighten the screw to 2 N·m (20 in. lbs.).
    10. Reconnect the battery negative cable.

    Sep 14, 2010 | 2006 Dodge Ram 1500

    1 Answer

    Please define Service A for the Mercedes C280, year 2006. Thanks, David


    It is the same for any mercedes. here is a copy from another source on the internet

    Interior
    · Function check
    · Check warning and indicator lamps, illumination and interior lighting
    · Check windshield wiper, windshield washer system, headlamp cleaning system
    · Reset maintenance service counter in instrument cluster

    Wheels, brakes
    · Check front brake pads for lining thickness
    · Check tires for damage, condition
    · Correct tire inflation pressure

    Engine compartment
    · Change engine oil and filter
    · Fluid level checks of the following:
    · Engine cooling system, antifreeze and corrosion protection
    · Windshield washer system
    · Brake system
    · Check and correct battery fluid level
    · Check battery condition
    · Check catch, safety catch and hinges on engine hood for proper operation

    Trunk
    · Correct tire inflation pressure in spare tire
    · Check battery condition

    Aug 29, 2010 | Mercedes-Benz C-Class Cars & Trucks

    2 Answers

    Srs light stays on on my Honda civic


    The most likely possibility is the connector for the airbag is not on securely. Check the connector first. But if the connector is connected properly then you will have to get the error codes to locate the exact problem for SRS light ON.
    There is a way to pull the codes from the SRS control unit without a scan tool.
    1. Turn the ignition switch OFF , and wait for ten seconds. Then connect the SCS service connector to the service check connector (2P). If you do not wait ten seconds, the SRS unit will not be completely reset and will not output DTCs.
    2. Turn the ignition switch ON (II). The SRS indicator light comes on for about six seconds and goes off. Then it will indicate the DTC:
    · The DTC consists of a main code and a sub-code.
    · Including the most recent problem, up to three different malfunctions can be indicated.
    · In case of a continuous failure, the DTC will be indicated repeatedly.
    · In case of an intermittent failure, the SRS indicator light will indicate the DTC one time, and then it will stay on.
    · If both a continuous and an intermittent failure occur, both DTCs will be indicated as continuous failures.
    · In case the system is normal (no DTC), the SRS indicator light will stay on.
    3. Read the DTC.
    4. Turn the ignition switch OFF, and wait for ten seconds. Then disconnect the SCS service connector from the service check connector (2P).
    The SCS Service Tool is nothing more than a jumper wire.
    Thanks. you can rate this solution and show your appreciation.

    May 19, 2010 | 2000 Honda Civic

    1 Answer

    In the Display i noticed an indication saying that B5 SERVICE IS REQUIRED. MODEL E230 - YEAR 2003


    Hi,
    B-Service — First visit at approximately 20,000 miles or one year after previous service, but determined by Flexible Service System; then every 20,000 miles or 2 years. This is actually pretty essential to do, despite seeming like a lot of money for not much work.
    Services performed:
    Interior · Function check · Check warning and indicator lamps, illumination and interior lighting · Check windshield wiper, windshield washer system, headlamp cleaning system · Reset maintenance service counter in instrument cluster · Replace dust filter (not applicable to SL-Class) · Replace combination filter (SL-Class) · Check parking brake (function test only)
    Wheels, brakes · Check condition/thickness of front and rear brake discs · Check front and rear brake pads for lining thickness · Check tires for damage and condition · Measure tread depth, record in mm · Correct tire inflation pressure
    Underside of Vehicle · Check for major components leakage · Check for chafe marks, line routing, damaged components · Check condition of front axle ball joints and rubber boots · Check condition of mechanical steering components and rubber boots
    Engine Compartment · Check for major components leakage · Check for chafe marks, line routing, damaged components · Check and replenish all fluid levels · Change engine oil and filter · Check engine cooling system, antifreeze and corrosion protection · Check brake system · Check power steering · Check Active Body Control · Check windshield washer system · Check and correct battery fluid level · Check battery condition · Check catch, safety catch and hinges on engine hood for proper operation · Check condition of poly V-belt
    Trunk · Check battery condition · Correct tire inflation pressure in spare tire

    Thank you!

    May 19, 2010 | Mercedes-Benz C230 Cars & Trucks

    1 Answer

    How do you turn off the airbag light on the right side of a 1999 volvo s80?


    According to the manual, that warning light will illuminate if a fault is detected. Normally, the SRS warning lamp should light up when the ignition key is turned to positions I, II or III and should
    go out after 7 seconds or when the engine is started.

    · If the SRS (Supplemental Restraint System) warning light stays on after the engine has started or if it comes on while you are driving,
    drive the car to the nearest authorized Volvo retailer for inspection as soon as possible.

    Hope this helps.

    Jul 08, 2009 | Volvo S80 Cars & Trucks

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    31 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Renault Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    xxxxxx xxx

    Level 3 Expert

    4874 Answers

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Are you a Renault Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...