Question about 2007 Pontiac Torrent AWD

Open Question

High beams dont work, only low beams do. 07 torrent

High beams dont work ,only low beams is there a switch under the hood we can push to fix this problem. There is only one bulb for both beams

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 151 Answers

SOURCE: no high beams

Check ur fuses, then maybe ur bulbs are finished. Have they been replaced at all?

On the fuse cover, it usually tells u which fuse does what.

When u press the switch for the high beams, do u see the high beam indicator light up in the dash cluster? If so, highly doubt it's the switch.

Posted on Sep 08, 2008

  • 2 Answers

SOURCE: drl not working nor are low beams high beams work properly

Ok look under the bagtterry tray, there is a black box bolted to the body, it is the headlight ground and has a really bad tendency to corode due to the design.

Posted on Feb 04, 2009

SOURCE: High beams work but low beams do not. Fuses seem to be good

Hi

I would start with the dimmer switch if you know the lights are good dimmer switches do this you will lose your high beam or you will lose your low beam when they go bad.

Posted on Feb 26, 2009

Molson02536
  • 3854 Answers

SOURCE: high beams dont work

Could be that your high beam light's are burnt out and need to be replaced. When you say the the switch is new you mean the lever on the stearing collum is new right?? Good luck

Posted on Apr 06, 2009

  • 496 Answers

SOURCE: High beam headlights quit working. Bulbs are OK.

When you checked the bulb plug and got 12 volts, did you meter ground some where else on the car? If so, you might check ground also at the plug.

Posted on Aug 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the headlamp relay on a 2007 saturn ion


Are both low beams an high beams not working ? What engine does your car have ? Low beam relay only on 2.2 L .
On vehicles with manual headlamps, the LH HDLP and RH HDLP fuse in the fuse block - under hood, supply battery positive voltage to both low beam lamps and high beam lamps at all times. The low beam and high beam circuits continue through the fuse block - under hood, through the body control module (BCM), and to the headlamp switch. The low beam or high beam circuit then, depending on the position of the dimmer switch, continues through the headlamp switch. When the headlamp switch is placed in the ON position, it provides a ground path for the low beam or high beam lamps through G203. The low beam and high beam circuits are monitored by the BCM.
Is there B+ voltage at the headlamp fuse's ? Power runs from fuse through the head lamps to the dimmer switch through the head lamp switch to ground when turned on . If there is B+ voltage at the fuse ,check for voltage at the headlamp switch .
The

Oct 16, 2016 | 2007 Saturn Ion

1 Answer

No high beams on pontiac torrent


if fuse and relay okay. problem in the dimmer switch

Dec 29, 2012 | 2006 Pontiac Torrent

1 Answer

2007 pontiac grand prix headlights are not working correctly. High beams work but not low beam. nothing works on automatic. Low beam bulbs have been replaced. Lights worked for one day, then back to not...


I drive a 07 Grand Prix and the low beams randomly went out. Could not get them to come back on, but all of the other lights worked (inside, parking, and high beams). found a forum online that recommended replacing the fuse/thing at location #35 in the fuse box under the hood. It worked immediately!! Got the part at Advanced Auto parts for $35 dollars.

Aug 25, 2011 | 2007 Pontiac Grand Prix GXP Sedan

1 Answer

High beam works and low beam dont , checked fuses under hood there good , tried new switch stilll no low beam , is there a relay for low beam cant find one.


Why yes there is. It's #46 under the hood. Switch relay #45 with #46, do you now have lights? Either clean the contacts by pushing it in and out of the fuse box, or buy a new relay. Cleaning the relay worked for me, but I keep a spare just in case. Very common problem with Envoys and Trailblazers.

May 28, 2011 | 2004 GMC Envoy

2 Answers

Low beams don't work; High beams fine. Not the


the high beam switch is at fault
A new one is needed
The directional lever you pull up on to switch to high and low connects to a rod which is going to the high beam switch at the mid section of the steering coluum. It is a headache to change for your on your head replacing this part

May 24, 2010 | 2004 GMC Envoy

2 Answers

My low beam lights dont work but high beam do?


The high, low beam might run off two differant relays. Look in the fuse box under the hood. You might have blown the relay

Nov 12, 2009 | 1997 Chevrolet Tahoe

1 Answer

1993 corsica--low beams work fine, no high beams.


Check the fuses under the hood...chances are it's one of them....there's not much left to check after that....check the fuses inside the car as well...it might be the high beam switch is bad that switches the low beams to high beams inside the car.

Apr 19, 2009 | 1993 Chevrolet Corsica

2 Answers

High/low beam


it very possible it could be in the switch itself but check the relay first which is usually located under the hood in the relay box

Mar 07, 2009 | 2001 Dodge Neon

1 Answer

My headlights dont work,.all other lights are fine though,.is it the fuses or the bulbs? im not sure what fuses they would be,.there seem to be different ones for the same thing


do your flash to pass lamps light when you pull the stalk towards you? If yes, the bulbs are ok.
Do the hig beams work?
Your headlamps have sepaerate fuses for each headlamp and you have a low beam relay and a high beam relay under the hood in the black box.
If everything is out, I suspect a bad headlamp switch.
Check car-part.com and look on page with * for cheapest price.

Your owner manual will identify fuses & relays.

PS, You did not recently instal high current bulbs did you? If yes, put originals back in.

HEADLAMPS

The voltage is supplied to the lamp switch through a fuse. This fuse is located in the central junction box in the left-hand footwell.
When the headlamps are switched on, a voltage is supplied to the high beam/low beam switch and to the low beam relay. The relay for the low beam is located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "low beam", then a voltage is supplied through the low beam relay to the low beam part of the headlamp assembly. The left and right-hand low beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "high beam", then a voltage is supplied through the high beam relay to the high beam part of the headlamp assembly. The left and right-hand high beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.

----------------------------------------------------------------------------------------------------------
Lamp Switch
Removal
  1. s2y~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
    Remove the lower driver's side footwell trim.
  1. Detach the lamp switch bezel.
    • Remove two screws.
  1. Remove the light switch.
    • Remove three screws.
    • Disconnect the electrical connector

Feb 23, 2009 | 2005 Ford Focus

1 Answer

2006 ford freestar high beams


there should be seperate fuses for the high beams in the under hood fuse box try checking them

Nov 05, 2008 | 2006 Ford Freestar

Not finding what you are looking for?
2007 Pontiac Torrent AWD Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...