Question about 2008 BMW 328xi

Open Question

Telecommunications unit in 2008 bmw - 2008 BMW 328xi

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

BMW 630 2008 model. Entertainment system freezes and stays on even when car switched off.

Have the codes read (oBD!!) I would suspect over voltage. This over voltage plays havoc with car systems and show many times on bmw as idrive screen faults and freezes. If codes read over voltage, replace alternator. Don't just replace regulator, not worth the hassle, regulator is attached to alternaor, get a refurb unit, bmw prices are silly.

Feb 26, 2017 | BMW Cars & Trucks

2 Answers

Gap for 2008 bmw 750l1

You do not gap BMW plugs, they are pre-gapped when new. If the corners are rounded off, you need new plugs.

Oct 27, 2015 | BMW Cars & Trucks

2 Answers

Can 2008 BMW 528i ignition coils be used for 2003 BMW 525i

According to my cross reference,the coil for 2008 528i is the same as 2003 525i.

You should use the same brand of coil so the internal resistance is the same.

Dec 25, 2009 | 2008 BMW 528i Sedan

1 Answer

Need to know the exact size of rims for a 2008 323i sedan BMW

2008 BMW 323i 4 door sedan - factory wheel rim size

Rim size (standard factory spec):
16 inch by 7 inches wide.
Front and rear are the same size.

(It is possible to fit 17 or 18 inch rims to the car if you wish together with an appropriate lower profile tyre ).

(please note that different models in the 2008 3 series BMW have different size rims. For example, the 328 and higher level models runs larger rim sizes).

Hope this helps. Cheers

Dec 08, 2009 | 2008 BMW 3 Series

1 Answer

One of my daylight running side lights has gone in my 2008 bmw 3

it either screws into place or you should be able access it from under the hood or from underneath the vehicle

Aug 25, 2009 | 2008 BMW 3 Series

1 Answer

DSC and DTC failed on 36000 miles under 4 year BMW 120D

I think you should check ABS sensor ring on the rear wheels. This is known to come loose and cause this problem. Hopefully it's just that you not the entire hydraulic unit

Aug 24, 2009 | 2008 BMW 1 Series

1 Answer

I need to find the starter and ignition wire in a 08 128i

Starter is located left side under the Intake Manifold, you can see it from underneath.

Aug 07, 2009 | 2008 BMW 1 Series

1 Answer

Dsc hydraulic unit failure

I have the same fault , that has just occured out of the blue only 38,000 on clock.
Drives perfectly and brakes fine too.
Warning light indicates Suspension Stability control
but diagnosed as yours at the same cost.
Apparently quite a common fault with series 1 , but BMW do not tell you that !!

Jun 22, 2009 | 2008 BMW 1 Series

1 Answer

DTC/DSC warning light appeared on my 120d

My advice - take the vehicle to your local dealer - tell them you just want it diagniosed - agree a time of say 20 minuits. That way you will know for sure and can then carry out any diy repairs yourself BUT should it require a complete hydraulic unit which is likely as they are hmm what's the word ... ****!- contact BMW customer service for financial contribution. Anon

Apr 07, 2009 | 2008 BMW 1 Series

2 Answers

Fuse diagram for 2008 bmw 528i Sedan?

located in the fuse panel... which i'm told on bmw's is in the trunk... does your radio work


Jan 10, 2009 | 2008 BMW 528i Sedan

Not finding what you are looking for?
2008 BMW 328xi Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers


Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides