Question about 2002 Nissan Sentra

Open Question

Flasher relay turn signals and hazards dont work

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 166 Answers

SOURCE: 1991 Maxima Turn Signals

the flasher unit controls both hazards and indication you will need to remove the shroud around the steering wheel and follow the wires coming off the indicator stalk down until you find the problem there should be some majour plugs on the stearing collum check thaat these are conected and work from there

Posted on Dec 21, 2008

Ad
alicantecoli
  • 22246 Answers

SOURCE: Turn signal isn't working on my 1992 Nissan

you americans and your facination for relays,they rarely go wrong ,if hazards working and flashers do not then their is only two options ,the hazard light switch or the flasher switch ,i would change the hazard light switch first ,they are interconnected

Posted on Nov 21, 2009

  • 2 Answers

SOURCE: Location of Turn signal flasher for 95 Nissan 4wd 4cyl MT

Found it!! - It is indeed under the dash, directly above the clutch pedal arm and attached to the brake support bracket. The original one was black and NOT round. It's about 1.5 inches long and 1 inch square. The three wires drop down out of the bottom and there is a connector release you have to push to release the wires. The flasher relay itself can slide off the mounting point, with a little extra pressure, pushing towards the left side (outward) of the truck. (left hand drive models).

Posted on Jan 12, 2010

  • 395 Answers

SOURCE: right side turn signals are on, not blinking just

i would change the bulb sounds like the 2-way light is broken

Posted on May 07, 2010

  • 565 Answers

SOURCE: Turn signal not working but

if all fuses are good and your satisfied the flasher is good the turn signal assembly may be bad. this is the the arm your pushing down to make the turn signals work. its an assembly and may require removal of the steering wheel to replace. hope this helps

Posted on Feb 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a turn signal flasher in '93 t-bird


Sure.
The hazards and turn signals each have a flasher.
They are different, both look like a small relay. You may have to get the turn signal flasher from Ford. You may want to check with them to see what the part looks like to make sure you are working on the right one.
They are generally under the dash on the driver side.

Aug 23, 2012 | 1993 Ford Thunderbird

3 Answers

Turn signals dont work on 1993 skylark. all bulbs are good. hazard lights blink fine. turnsignal dash light stays green and doesnt blink


There are 2 separate flasher relays. 1 for the turn signals and one for the hazards. I believe you have a bad flasher relay for the turn signals. The location of that is in the front seating area on the drivers side, under the dash on the drivers side of the steering column, mounted on support bracket. I provided a picture of what it should kind of look like although the picture I gave you is an aftermarket one so the color and such may be a little different but will look the same. Don't get it mixed up with the hazard relay which is located in the front seating area on the drivers side under the dash above the kick pane lmounted on top of the convenience. I am almost 100 percent sure the flasher and hazard relay are the same so if you want to just swap them out in order to have turn signals that should work. You won't have hazards however. I hope this helps you and good luck.


clifford224_215.jpg

May 07, 2011 | 1993 Buick Skylark

1 Answer

When the blinker is flipped up or down on the column the tail lights dont respond. But the brake lights and the hazards still work fine. Whats the problem?


The turn signal flasher relay may have a problem.Turn on the hazards and follow the clicking sound to the source and usually the hazard flasher and turn signal flasher are very close to each other.Remove the one that is clicking and put it in place of the turn signal flasher.If the Turn signals then work you will need to purchase a new turn signal flasher relay.They are usually just a few dollars.

Jul 29, 2010 | 1986 Ford F 250

3 Answers

No turn signals or hazzards


first thing is replace both flashers one for signals and the other for hazards. if they still dont work then its your signal light switch, also check all fuses before you do anything.hope this helps.

Oct 20, 2009 | 1999 Chevrolet Lumina

2 Answers

Turn signals hazards flasher don't work jeep cherokee replaced combination flasher relay, turn signal switch and still no signals


I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Sep 27, 2009 | 1999 Jeep Cherokee

3 Answers

Turn signals wont work fuses are good?


the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Hazards work turn signals dont


check your flasher the Hazards have a seperate flasher its a littl cube that looks like a relay in or near the fuse box

Apr 07, 2009 | 1987 Pontiac Firebird

1 Answer

2004 F150- Hazard Flashers dont work, turn signals do work


try replacing the hazard relay it should be under the dash try turning it on and off with your head down by the floorboard to pinpoint the right relay and the location. you should be able to hear it easily. hope this helps.

Dec 04, 2008 | 2004 Ford F150

2 Answers

Turn signals don't work


i have a similar problem but my left signal works, when i turn the right on it just does an annoying buzz sound. if you can think of any explination for such shinanogins help would be greatly appreciated

Nov 25, 2008 | 1989 GMC K1500

Not finding what you are looking for?
2002 Nissan Sentra Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...