Question about Hyundai Cars & Trucks

1 Answer

Hyundai tucson crdi fitted a new throttle pedal but p2113 fault code keeps comming back

Fitted a brand new throttle peddle and car ends up in limp home mode cannot remove fault code p2113 with my scanner

Posted by on

  • 2 more comments 
  • tony walker
    tony walker Nov 17, 2013

    my hundai tucson is a 2006 and yes it's the throttle position sensor that i have changed,so will it mean it will have to got to the dealer and use there machine to remove the fault code as my hand held scanner won't remove the code permantley

  • lonnie stewart
    lonnie stewart Nov 17, 2013

    take it to a reliable shop or dealer only if you have a large bankroll! if it went into a limp mod removing the code will not help

  • tony walker
    tony walker Nov 18, 2013

    is it possible that the throttle body could have a fault ?

  • tony walker
    tony walker Nov 18, 2013

    also mannaged to remove fault code for a few days and ran like a dream with no problems then fault came back

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 24 Answers

I hope you mean a throttle position sensor, if so it needs to be adjusted. also newer year models codes bust be removed with a scanner.

Posted on Nov 17, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: 99 jag xk8. I get stability control fault, car

Check your Throttle

Posted on Aug 13, 2009

  • 1 Answer

SOURCE: My Audi A3 2.0 tdi limp mode/turbo overboost

i also have done a diagnostic test and it states a turbo overboost condition and it drives fine locally but loses power on the motorway and struggles to reach 80mph? any suggestions please email me at shiz86@hotmail.co.uk

Posted on Sep 14, 2009

  • 246 Answers

SOURCE: fault codes p1211 and p0251 keeps putting my van

Fuel injection circut malfunction.
How many cylinders

Posted on Jan 03, 2010

  • 1 Answer

SOURCE: hyundai tucson 2 liter crdi gear box sound its a

Hi there, the Common Rail Diesel Inyection (CRDI) 2000 cc 112 Hp M/T have a big trouble on cluth plate, and sounds very loud between 1500 and 2000 rpm on 2,3,4 shift.That motor has too much torque and cause excesive wear in the cluth roll and plate so starts roominess in the cluth system. You could change those parts but quickly the sounds come again. Hyundai is the resposable of that damage. I hope in the near future recall the CRDI model 112 Hp and replace the cluth.

Posted on Feb 28, 2010

alicantecoli
  • 22219 Answers

SOURCE: failsafe keeps appearing

take it to jaguar and have the software checked and any fault codes removed ,

Posted on Apr 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Throttle body for Hyundai Tucson 2008 UK


What is the DTC code that you are getting ?

Dec 10, 2015 | Cars & Trucks

1 Answer

What parts do you recommend for a fault on my Hyundai Tucson which has developed faults?


uh oh, 1186 and 0087 are both related... fuel pump or the filter or both! either case the filter is now located inside the fuel tank

P1186 Hyundai Fuel Pressure Too Low


P0087 Fuel Rail System Pressure Too Low

"Potential causes of a P0087 trouble code may include: Weak fuel pump, clogged filter or screen, restricted fuel supply line Faulty fuel pump driver module Faulty fuel pressure sensor"


How to Change the Fuel Filter on Hyundai Tucson eHow

according to eHow, you can access the filter relatively easily. (although the pic is an illustration of something not really related to this ~ why they showing a fuel petcock that's not even on your car?)

P2112 Throttle Actuator Control System Stuck Closed

"Possible causes:
- Throttle Body Plate Binding
- Faulty Throttle Actuator
- Throttle Actuator harness is open or shorted
- Throttle Actuator circuit poor electrical connection"

older models we had the gas pedal attached to a cable to move the butterfly valve on the throttle body. Now it's this newer drive-by-wire stuff... remove air intake hose and check / clean / move the throttle body valve by hand first to see if it's binding or not

then, go from there on testing the actuator and tps

Apr 17, 2015 | 2006 Hyundai Tucson

2 Answers

I have a problem with a 2.2 crdi 2007 santa fe ,I am only after replacing 4 valves in engine and car is running perfect only for the code p2113 keeps coming up i have replaced the foot throttle but t


Here is what the code is. I believe it is also called a TPS (throttle position sensor). On most carburetors it is on the side opposite the throttle linkage. You can take it off and test it with an ohm meter. All it is is a variable resister (like a volume knob on a radio) as it turns it changes resistance and that info is sent to the computer witch in turn tells the computer what position your throttle is.
On most cars it is an easy thing to change out and not very expensive. Good luck
P2113 Throttle/Pedal Pos SensorB Minimum Stop Perf

Nov 22, 2014 | Hyundai Santa Fe Cars & Trucks

2 Answers

Electronic throttle body no responce from it but still can rev up to 2900 rpm


you need to have the throttle position sensor adjusted by the dealer using a tec 2 scanner.

Nov 21, 2013 | Cars & Trucks

1 Answer

HYUNDAI TUCSON 2006 POOR IDLE / WON'T REV


On many diesels, when I read codes they mention an egr valve, but what they are really talking about is the throttle actuator. What I don't understand is why you no longer have any codes. there are some codes which do not turn on the light on the dash because the computer hasn't decided yet that it is a hard code, so check for them anyway. The symptoms you are describing usually turn out to be either the throttle actuator, fuel rail pressure regulator, or a ripped turbo hose

Mar 06, 2013 | Cars & Trucks

1 Answer

Car has done only 3600 miles but clutch seems to slip when trying to pull hard. Hyundai Tucson 2 litre crdi


check your clutch pedal for free play it should be 3/4" it might be adjusted up to much, you might have to adjust it off a little....hope this helps....cheers

Jul 06, 2010 | 2005 Hyundai Tucson

1 Answer

Gear stick vibration only in 3rd gear @ 2500 rpm on my new 2009 Tucson 2l any idea what causes this,as dealer says new "PART" needs to be fitted


My brand new 2009 Tucson has the same problem. My dealer said it needs a 3rd Gear Kit fitted.
They are on back order as a number of other Tucson's have the same problem. I may have to wait 3 months for the part.
My dealer has ordered 126 back order parts for this problem.


Nov 18, 2009 | 2009 Hyundai Tucson

2 Answers

Hyundai tucson 2 liter crdi gear box sound its a manual transmission


Hi there, the Common Rail Diesel Inyection (CRDI) 2000 cc 112 Hp M/T have a big trouble on cluth plate, and sounds very loud between 1500 and 2000 rpm on 2,3,4 shift.That motor has too much torque and cause excesive wear in the cluth roll and plate so starts roominess in the cluth system. You could change those parts but quickly the sounds come again. Hyundai is the resposable of that damage. I hope in the near future recall the CRDI model 112 Hp and replace the cluth.

Sep 20, 2009 | 2005 Hyundai Tucson

1 Answer

I have a 'check engine' amber light illuminated


dear friend-your vehicle need to be hooked up to a HI-SCAN-PRO or GDS in order to read your fault codes.only if you have a fault code will you be able to carry out any repairs.

Jul 05, 2009 | 2006 Hyundai Tucson

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

957 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...