Question about 2005 Toyota Matrix

Open Question

Toyota mark x gear box oil cpacti - 2005 Toyota Matrix

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

postings909
  • 130 Answers

SOURCE: The oil is leaking from the gear box of my automatic transmission

what box?? gear box are described as tranny, differential and steering box. if steering is leaking check the seals at input shaft or bottom replacement is nessary but can be done pretty easy and cheap too. if leaking from hose then you looking as a hydraulic hose like $80 or so..

Posted on Feb 16, 2010

Testimonial: "That was great response. However the leakage is from the differential but not the steering box. Thanks a lot."

Ironfist109
  • 3018 Answers

SOURCE: cannot locate position in motor


  • You don't have a dip stick on this car. You have to go underneath the car and on the transmission you will see two plugs, one on top of the other. The one on top is the fill. The one on the bottom is the drain plug.

  1. To fill it you need a funnel with a hose on it.
  2. Remove the fill plug (top) and fill the transmission just until the gear lube barely seeps out and replug it.
  3. This is now the properly filled.
  4. Plug the fill hole back up.


  1. If you get a container and put it under the drain plug on the transmission and pull the top fill plug FIRST and then the bottom drain plug and let all the gear lube run out.
  2. Now plug the drain hole and fill the transmission till it seeps out.
  3. Now plug the fill hole.
  4. You just did a transmission flush on your vehicle and saved yourself $75usd shop charge.


Regards, Tony

Posted on Apr 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you adjust valves on a 2006 3.5L V6 Toyota Avalon?


There is a Toyota Technical Service Bulletin issued for this:-
T-SB-0291-08 September 11, 2008 2GR-FE Valve Timing

Procedure Service Category Engine/Hybrid System Section Engine Mechanical Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2005 - 2009 Avalon 2007 - 2009 Camry VDS(s): BK46K 2008 - 2009 Highlander 2006 - 2009 RAV4 Engine(s): 2GR VDS(s): BK31V, BK32V, BK33V, BK34V, ZK31V, ZK32V, ZK33V, ZK34V, ZK35V 2007 - 2009 Sienna Introduction This service bulletin provides information regarding valve timing inspection and service guidelines for vehicles equipped with 2GR-FE engines. © 2008 Toyota Motor Sales, USA Page 1 of 5 T-SB-0291-08 September 11, 2008 Page 2 of 5 2GR-FE Valve Timing Procedure Introduction (Continued) Figure 1. 3 2 1 5 9 8 7 6 4 1 RH Bank Intake Camshaft Timing Gear 2 RH Bank Exhaust Camshaft Timing Gear 3 RH Bank No. 2 Timing Chain 4 Crankshaft 5 Idler Gear 6 Timing Chain 7 LH Bank No. 2 Timing Chain 8 LH Bank Exhaust Camshaft Timing Gear 9 LH Bank Intake Camshaft Timing Gear Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 3 of 5 2GR-FE Valve Timing Procedure Inspection 1. Set the No. 1 cylinder to TDC/compression. A. Set the timing mark to 0 on the timing chain cover by rotating the crankshaft clockwise. B. Verify the timing marks on the camshaft timing gears are in general alignment with the timing marks of the camshaft bearing cap: TIMING MARK IDENTIFICATION CYLINDER BANK INTAKE GEAR MARK EXHAUST GEAR MARK RH Bank (Bank 1) Small Mark Single Line LH Bank (Bank 2) Large Mark Double Line HINT When the engine is correctly timed, the timing marks will NOT perfectly align. Figure 2. Figure 3. RH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 4. RH Bank Intake Camshaft Timing Gear 2 1 1 Bearing Cap Timing Mark 2 Gear Timing Mark © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 4 of 5 2GR-FE Valve Timing Procedure Inspection (Continued) Figure 5. LH Bank Intake Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 6. LH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark HINT If the timing marks appear vastly out of alignment, turn the crankshaft one revolution (360 ) clockwise and note the position of the timing marks. Component Removal Guidelines 1. If engine disassembly is required that involves removing the camshafts or timing gears, set the #1 cylinder to TDC compression, wipe away any oil, and mark the following items in relation to each other prior to disassembly: • Timing gears • Timing chain • Timing chain No. 2 NOTE This relationship MUST be maintained. The intake gear is timed in relation to the crankshaft via the timing chain; the exhaust gear is timed in relation to the intake gear via the No. 2 timing chain. © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 5 of 5 2GR-FE Valve Timing Procedure Component Removal Guidelines (Continued) 2. If NEW camshaft timing gears or the No. 2 timing chain are being installed, the two yellow links on the No. 2 timing chain can be used to ensure correct relationship between the intake timing gear and the exhaust timing gear. Figure 7. 1 1 Yellow Link A. Align the paint mark on the timing chain with the intake gear timing mark (to ensure the intake gear is correctly timed to the crankshaft). Figure 8. RH Bank and LH Bank 3 3 4 3 3 4 5 4 5 4 1 2 1 RH Bank 2 LH Bank 3 Yellow Link 4 Gear Timing Mark 5 Timing Chain Paint Mark B. Align the two yellow links on the No. 2 timing chain to the timing marks on

May 04, 2015 | 2006 Toyota Avalon XLS

1 Answer

How much oil does a 1993 Toyota hilux gearbox hold


0 There is a plug on the side of the gear box. Pull plug out. You should be able to stick your finger into the hole and touch the gear oil. If not, check on your owner manual and see what type of oil goes back into the gear box. Fill it up until it start coming out of the plug hole.put plug back in, & back to riding. Are when you go to the oil change shop???? Get them to show you where it is at, and get them to top it off for you.???

Feb 28, 2015 | Toyota Hilux Cars & Trucks

1 Answer

Wht are the toyota timing marks


ON THE CAMSHAFT GEAR ARE UNE HOLE NEED TO MATCH THE HOLE WHIT THE MARK A THE CYLINDER HEAD AND ON THE CRANCSHAFT GEAR ARE UNE DOT ALING WHIT THE MARK A THE ENGINE OIL PUMP COVER

Sep 01, 2014 | 1992 Toyota Camry V6

1 Answer

97 prado transmision oil requir


Manual or auto, main gearbox or transfer box?
Auto box will be normal trans fluid, transfer box will be gear oil probably 80w or 90w.
Main gearbox manual, lighter gear oil.

May 30, 2014 | 1997 Toyota Land Cruiser

1 Answer

1999 HZJ75 toyota troopy ...I have what I think is a gear box noice. Noticeably getting worse over several weeks. Gone from a whine to reverberating whine. Occurs worse when acceleration is off but stll in...


I'd check the U-joints first. Then, check for low gear oil level in the gear box.
Also examine it by draining the gear oil to see if it has any metal fragments in it.
If it does, you probably have a bad bearing or something else coming apart.

Jan 10, 2011 | 1999 Toyota Land Cruiser

1 Answer

The oil is leaking from the gear box of my automatic transmission


what box?? gear box are described as tranny, differential and steering box. if steering is leaking check the seals at input shaft or bottom replacement is nessary but can be done pretty easy and cheap too. if leaking from hose then you looking as a hydraulic hose like $80 or so..

Feb 16, 2010 | 1998 Toyota Corolla

1 Answer

OIL LEAKING FROM TOP OF GEAR BOX


is it coming from transfer case gasket?its mounted to gearbox or breather

Jan 01, 2010 | 1987 Toyota Land Cruiser

1 Answer

Dose the engine oil top up the gearbox oil in the toyota rava4 19


NO the engine oil only tops off the engine it self and the gear box uses a different oil and to top it off and check is different from the engine dip stick. Good luck and your manual should tell you when it's time to service your gear box oil. 

Sep 16, 2009 | 1996 Toyota RAV4

1 Answer

I have a 1992 toyota pickup that is automatic transmission, air conditioner. It will not shift into gear.


you check if there is enough oil in the gear box,if so you must level it ,also check around the gearbox if there is leakage ,if the level of oil i s low this the torque converter will not transfer the the torque to the gear box,and that why it will not shift into gear,that the main cause...........

Aug 31, 2009 | 1992 Toyota Pickup

2 Answers

Gear oil heating prevention


U buy the biggest oil cooler u can fit in front of your radiator.

Jan 30, 2009 | 1993 Toyota Land Cruiser

Not finding what you are looking for?
2005 Toyota Matrix Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...