Question about 2006 Land Rover LR3
Possibly wrong bulb? Check you havent replaced a single contact bulb with a double contact one. Otherwise check earth to cluster,
Posted on Nov 16, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hello zeeko1 , over here when that happens its because someone put a single element bulb where a double element bulb goes , now this bulb you take out to fix the problem , look at the bottom of the socket see if it has 1 contact point , then look into the hole where the bulb goes , i bet you see 2 contacts , this single contact bulb is shorting out into the other circuit back feeding voltage to other circuit . cheers mate !
Thanks for using FIX YA !
Posted on Jan 28, 2009
If your brake lights don't work Its because you blew the fuse which Is located In the main fuse panel under steering wheel. Without break lights your rover will fire up nice but wont shift out of park until you replace the fuse. If your ABS Is acting up It Is also an easy fix. Disconnect the ABS from each wheel. You still got all wheel disc breaks that work great but no ABS. Your other option is thousands of $$. If your breaks are weak check your master cylinder and make sure you got enough fluid and that you are not loosing the fluid. If you notice you are leaking brake fluid because you have to keep filling it up but cannot find a leak anywhere. I bet I know where It is. Check your rear break lines and make sure one of them didn't get caught in your rear springs and pinched ever so slightly when you were doing dounuts In the snow.
Posted on Mar 22, 2009
Had the same problem with my 03 Disco. Went through the usual, checking the fuses, etc. I went ahead and replaced my break light switch on the brake pedal. $15.00 fix, or I thought so; still had the problem! Took it in for repairs and found out it was fuses after all... To get the parking lock to disengage you need to pull of the housing, which is tough and then press in the locking pin at the base of the shift lever to shift out of park. you can do it with the engine running and it will drive just fine until you put it into park again. Check your brake lights if there is a problem. Could be a sign of the brake switch failure. In my case the lights were out, but a cheap trailer rental did the damage. The short in the trailer blew some fuses and it was a problem that cost me $60.00 at the repair shop....
Posted on Aug 27, 2009
Tips for a great answer:
Jul 24, 2015 | Cars & Trucks
Mar 08, 2015 | 1998 Ford Explorer
Nov 10, 2014 | Cars & Trucks
Nov 16, 2013 | 2006 Land Rover LR3
Jul 02, 2012 | 1993 Toyota Camry
Jan 19, 2011 | 1997 Mercury Mountaineer
Nov 24, 2009 | Jeep Grand Cherokee Cars & Trucks
Sep 03, 2009 | Ford Super Duty Cars & Trucks
Jan 06, 2009 | 1999 Jeep Cherokee
118 people viewed this question
Usually answered in minutes!