Question about Cars & Trucks
Either a bad earth on the light unit or if american wiring it could be the stop light switch as they have this funny thing where the brake light is the indicator as well ,either way check the ground on the light unit as this is the most obvious problem
Posted on Nov 16, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
THis is a know problem with Jeep GC. If only one side is cold and the other is hot and there are no controls error codes. It is likely a broken temperature blend door on the faulty side (w/ dual controls). Dealer charges a lot to fix ~$800. There is a kit and instructions sold on EBAY to replace the part for $100. Seller claims that a relative novice can fix w/o removing the entire dash board as the dealer does. Has sold hundreds of kits....people seem satisfied....you may check it out. Search Heater Blend Door Jeep on ebay. Replacement parts are aluminum instead of OEM plastic.
Self Diagnostics on HVAC system. Jeep GC has built in diagnostics and will return error codes on the temp display if it is otherwise. Simple to display.
1) Press A/C and Recir button simutaneously
2) Rotate driver temp control knob clockwise then release buttons
3) If no controls error a code of "0" or "00" will be returned.
4) Error codes listings can be found on-line if anything but zero
Dealers charge $45 to run the same check
Posted on Jan 21, 2009
You have 2 posibilities.there are 2 motors on the heater box that run the blend doors for each side.That side motor may be bad or worst case the blend door arm that connects to the motor is broken.If it is broken the whole dash has to be removed so the heater box can be taken out to replace the blend doors.Big job,do a heater core while your there if you fix it so you dont have to do it again.
Posted on Mar 09, 2009
SOURCE: replace rear brake light
Open up the hatch and look for the screws that hold the tail light assembly to the body. After removing them you can gently pull the whole tail light from the truck. You will seee the sockets that the bulbs are in and they twist like a bottle cap to get to the bulb. Just pull the bulb from the socket and reverse what you did to put it back together.
Posted on Aug 09, 2009
Tips for a great answer:
Sep 15, 2011 | 2000 Jeep Grand Cherokee
Mar 27, 2010 | 2000 Jeep Grand Cherokee
Mar 11, 2010 | 2000 Jeep Grand Cherokee
Feb 17, 2010 | 2000 Jeep Grand Cherokee
Jan 08, 2010 | 2000 Jeep Grand Cherokee
Dec 07, 2009 | 2004 Jeep Grand Cherokee
Nov 20, 2009 | 2000 Jeep Grand Cherokee
Nov 11, 2009 | 2000 Jeep Grand Cherokee
Apr 08, 2009 | 2000 Jeep Grand Cherokee
Oct 24, 2008 | 2000 Jeep Grand Cherokee
43 people viewed this question
Usually answered in minutes!