Question about Cars & Trucks
It's at the end and side of the valve cover. A hose is hook up to it at the intake manifold. If your engine is side ways it the one at the back. Good luck.
Posted on Nov 16, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: water pump 1995 nissian maxima
acquire (2) 3" long coarse thread M8 bolts, set aside. remove main belt, belt tensioner pulley, belt tensioner bracket. then remove the timing chain tensioner cover located below-left of the the passenger-side motor mount, and the water pump cover located just below-right of the same motor mount. push the tensioner piston in and lock the piston in place by using a smaill nail, or push pin inserted in the hole.. youll see it. then rotate the engine counter-clockwise 20-30 degrees to free up chain tension on the water pump. Remove the bolts holding in the pump. Now using the 2 M8 bolts, thread them into 2 of the same top and bottom bolt holes evenly to pop out the pump. be sure to keep an eye on the chain as it can hold the pump in and hamper your efforts in getting the pump out.Make sure to lube up the 2 o rings on the new pump real slick, and pop it back in place. installation is the same, only backwards and without the M8 bolts. dont force the pump in...
Posted on Dec 15, 2008
If the engine is the 3.4L engine in the convertible then the PVC valve is under the intake for the plenum (the big silver cover with the 3/4L label) right in the center of the engine compartment near the back wall of the engine compartment, Follow the air intake from the airfilter housing back and right under where the big black hose meets the silver plenum is the PCV valve. ( I actually have one in my backpack today that I am going to replace tonight) Part number 2224 - BUY A GOOD ONE, not the cheapest one you can find.
Posted on Mar 16, 2009
according to the diagram it is located in the front of the engine screwed into the intake manifold, look for a large about 3/8 inch hose should be at the end. sorry thats all i can find Thanks Ray
Posted on Dec 15, 2009
Tips for a great answer:
Feb 20, 2015 | 1995 Nissan Maxima
Apr 20, 2011 | 1995 Nissan Maxima
Mar 28, 2011 | 1995 Nissan Maxima
Jan 12, 2011 | 1996 Nissan Maxima
Mar 10, 2009 | 1995 Nissan Maxima
Mar 07, 2009 | 2004 Nissan Maxima
Jun 20, 2008 | 2002 Nissan Maxima
31 people viewed this question
Usually answered in minutes!