Undo any wires and hoses connected to the turbo. Undo the bolts attaching the turbo to the manifold and lift it off.
SOURCE: taking the front door panel off my 525 bmw
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
SOURCE: how to adjust idle on bmw 525 tds,diesel
losen the bolts at the pump flange where it bolts to the engine block and rotate towards the engine about a 1/8 inch also adjust the linkage stop screw inwards no more than 1 1/2 turns
SOURCE: bmw 525 4 doors,how to remove rear door outer handle
has to remove the inside panel door and remove the clip inside to open the handle cover then u can see the two nuts and remove them
52 views
Usually answered in minutes!
×