make sure your engine cooling fan is working, check to see if your thermostat is staying closed and not allowing circulation in your engine, do this by squeezing the radiator hose when the car is hot, if it is hard to squeeze the thermostat is most likely the issue
On top of your radiator,there is a small black screw.
When filling water in the radiator, you should make sure to take off the screw, and keep filling and filling water until the water comes out from this hole. While you keep filling water and the water going out from there, you should put back the screw and close it tight.
Often people don't do that!! so what happens if you don't ?
Well there is also air going inside the engine with the water you filled. And because the air inside gets also heated but not cooled like the water, the engine goes hot.
Please let me know if this helped. Email me on bkalaaoui@yahoo.fr if you require further help.
heater blower goes off & on.no time limit,got mind of its own.heater gets hot.so got be...
(More)
heater blower goes off & on.no time limit,got mind of its own.heater gets hot.so got be electrical.bmw 318 is coupe,1997 year.
I have a BMW 318i SE saloon. The car feels like it's struggling or losing power. It hasn't cut out...
(More)
I have a BMW 318i SE saloon. The car feels like it's struggling or losing power. It hasn't cut out completely yet but seems to be having difficulty starting up from cold. The garage said the valves need replacing, would like to know if this could be true as I don't have much faith in garages I always feel like they're trying to rip me off!! Took car to garage in June as car overheated and broke down. The garage had the car for 2 months and £1200 later they told me the head gasket had gone!!
I have a 1997 740IL. There was an error code for the cramshaft sensor and I got it changed. After...
(More)
I have a 1997 740IL. There was an error code for the cramshaft sensor and I got it changed. After they changed the cramshaft sensor, they told me that there is now a problem with the knock sensor. The following are my questions: 1. why both codes did not show when they fixed the first problem 2. could they have fixed both at the same time. Meaning, are they both in the same area. Thanks in advance for your advice.