At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
2000 monte carlo how to replace water pump.last bolt
2000 monte carlo how to replace water pump.bolt behind power steering unit hits pulley -wont come out far enough.does pulley come off or need to remove power stering pump.
Thanks for the info.You are correct there are holes in the pump pulley for removal of power steering pump which is neccessary to get the last bolt out of the water pump.Fortuneately there are only 2 bolts holding the powere steering pump on and they are at 12 and 6 oclock in case any one else was having the same problem removing the water pump.Thanks for the info.You are correct there are holes in the pump pulley for removal of power steering pump which is neccessary to get the last bolt out of the water pump.Fortuneately there are only 2 bolts holding the powere steering pump on and they are at 12 and 6 oclock in case any one else was having the same problem removing the water pump.
AnonymousMar 15, 2014
when driving and i need to accelerate the car doesnt downshift properlywhen driving and i need to accelerate the car doesnt downshift properly
AnonymousMar 22, 2014
taillights and dashlight does not work what can be the problemtaillights and dashlight does not work what can be the problem
You can't post conmments that contain an email address.
Re: 2000 monte carlo how to replace water pump.last bolt
There should be holes in power steering pump pulley that when positioned correctly the bole should go through one of those holes, if not then you have to remove the pump
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To remove the pulley wheel from the power steering pump you typically have to remove 3 bolts but to get to those 3 bolts you have to use a socket and go through the holes on the pulley itself.
WATER PUMP ON FRONT OF ENGINE HAS THE FAN SHROUD AND PULLEY ON IT.FOLLOW LOWER WATER PUMP HOSE TO RADIATOR AND HEATER BYPASS HOSE YOU CANT MISS WATER PUMP..
you can either remove the steering pump to gain access,if there is no holes in PS pump pulley,you can rent a pulley puller....can be a ***** to get in and use them though....I will drill a hole in it for next time whenever I replace a pump on cars without ....
There is only 4 bolts that hold the pump to the block If you have the 4 bolts removed then hit the hub that the water pump pulley goes on with a hammer. some times you may have to hit it 3 or 4 good whacks. Hope this helps.
On the 3.4.... Drain coolant, remove drive belt guard, loosen pulley bolts, remove drive belt, remove pulley, remove water pump. Good idea to check the belt for cracks or wear when doing the pump replacement. Reverse the procedure to install.
Thanks for the info.You are correct there are holes in the pump pulley for removal of power steering pump which is neccessary to get the last bolt out of the water pump.Fortuneately there are only 2 bolts holding the powere steering pump on and they are at 12 and 6 oclock in case any one else was having the same problem removing the water pump.
when driving and i need to accelerate the car doesnt downshift properly
taillights and dashlight does not work what can be the problem
×