I blew the 80 amp main fuse in my 1986 Toyota truck. The old one won't pull out even with quite a bit of force. Do I need to take the whole fuse block loose and loosen something underneath?
yes, you must remove the top panel on the fuse block the 80 amp fuse is bolted to the the fuse panel, hope this helps if not get back to me as i strive to be the best please rate my fix Thanks Ray
Yes, you need to undo the fuse box from the body, then push the 80 and 60 amp fuses down through the base of the fuse box and then you need to take out the screws on both sides of the 80 amp fuse that hold it in place.
my gauges went down,no turn signals,and charge light came on.I changed alternator,checked all...
(More)
my gauges went down,no turn signals,and charge light came on.I changed alternator,checked all fuses,dont know where all ground straps are?
My yoda just shorted and drained the battery, resetting the clock,etc, will not start again! started...
(More)
My yoda just shorted and drained the battery, resetting the clock,etc, will not start again! started and drove this a.m. no prob. Jumped, got er goin, but after short drive, no juice to restart and clock reset....