Cars & Trucks Logo

Related Topics:

g
gregg saeger Posted on Oct 31, 2013

Gmc envoy 2003 driver windows not working

I left the window open and rain came in. None of the buttons on the drivers side control panel worked for 2 months. I took it apart and reconnected the wiring and everything works except the window buttons?

1 Answer

El Jeffe Alston

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that hasĀ over 10 points.

  • Contributor 29 Answers
  • Posted on Oct 31, 2013
El Jeffe Alston
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that hasĀ over 10 points.

Joined: Jul 26, 2012
Answers
29
Questions
0
Helped
8682
Points
58

Take apart again, and clean all connectors and try again. Maybe some rust build up on connectors.

5 Related Answers

Anonymous

  • 59 Answers
  • Posted on Dec 22, 2008

SOURCE: power windows/ door locks

you might have left your window cracked and it rained on it, or it could have gone out on its own but it is definately the master control switch, on drivers door needs replacing. hope it helped you.

Ad
dealt_soul

James Bradburn

  • 299 Answers
  • Posted on Feb 13, 2009

SOURCE: all power buttons in driver door stopped working

Check your fuse for the windows and locks, water has shorted out the switches or cased a fuse to blow. But check the fuse first. The fuse location would be listed in the manual or on the inside of the fuse door panel.

Tina Stewart

  • 55 Answers
  • Posted on Mar 30, 2009

SOURCE: All of the power windows just went out on my 04

slide the rubber boot up and check the wires in the hinge of the doors. I will bet anything that the wires are broken. that was what was wrong with mine. just splice them back together and everything should work fine.

Anonymous

  • 37 Answers
  • Posted on Apr 06, 2009

SOURCE: driver side power window control dose not work

SOUNDS LIKE BROKEN WIRE IN DOOR JAMB

jamie

  • 1810 Answers
  • Posted on Jan 13, 2010

SOURCE: 2003 Chevy Tahoe. Driver's side power window

check releys and wires in door jam 1 might be broken failing that u need a new switch

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How can I reset the control panel

The body control module needs to be looked at.
0helpful
1answer

Where is BCM located on a 2003 GMC Envoy

The BCM is located under the rear seat on driver's side next to fuse box.
Don't believe this is a BCM problem, it is more likely the Driver's Door Module itself. Try moving the passenger door module over to the driver's side and see if that works the windows.
0helpful
1answer

2004 Envoy XUV heated seats do not work on both sides. I press the button and the lights come on, when i release the button the lights go out. I checked the fuses mentioned in the articles on this site but...

If other functions such as window controls and power seat controls are normal, here are some possibilities;
1) Circuit Breaker #8 in rear fuse panel
2) Defective Driver Memory Seat Module (under driver's seat)
3) Break in data lines between Driver's Memory Seat Module and Drivers Door Module
4) Fuse 23 & 6 in rear fuse panel
0helpful
1answer

2003 cadilac deville driver window off track. motor seems to work but window will not go up.

Window regulator is bad in the drivers door . Do you know what a regulator is ? The Trainer 24 Power Window Troubleshooting Do you know anything about automotive electrical testing ? How to read an use a wiring diagram ? Do you know there are two side to a electrical circuit ? B+ voltage an a ground side . Plus there is electronic control modules and class 2 serial data network involved . When you push the switch for a window othen then drivers window on the drivers door . a class 2 message is sent to the other doors modules . The correct module will then open it's window .
http://www.bbbind.com/free_tsb.html Check out free wiring diagram here .Enter vehicle info . year , make , model and engine size. Under system click on body & accessories , subsystem click power windows . Click search button , then click each link one at a time .
3helpful
1answer

Driver side door, electric windows and lock will not work.

If windows still work from other door switches, then fuse is good, if not check fuse, if they do replace master window switch, shorted out with the water.
0helpful
1answer

Power window in my 2003 gmc envoy will not stay up

this happened to my driver's side window. i took it to the dealer and they replaced the window regulator. they said the motor was fine, just the regulator. $400.
2helpful
2answers

Power windows/ door locks

you might have left your window cracked and it rained on it, or it could have gone out on its own but it is definately the master control switch, on drivers door needs replacing. hope it helped you.
1helpful
1answer

Hi, I have a 2003 gmc sierra hd, duramax engine, 2 doors, long box. There is power locks on it and the door driver's door doesn't lock either with the driver switch or the passenger door switch, I change...

I have a similar problem. The remote sometimes opens all doors, and other times it will only open the 2 rear doors. Once inside the vehicle, the driver side window controls intermittently operates all windows and doors. It has no effect on the 2 rear doors, as the window controls still work. This behavior happens intermittently while driving the vehicle.
Not finding what you are looking for?

128 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...