Problem for BMW Cars
Generic problem for all BMW 328 Cars
How to change Front Turn Signal Light Bul...
how to change Front Turn Signal Light Bulb in 99 BMW 328i? How do I release the housing?
Comments:
May 05, 2009
- The way to do it is to insert a screw driver into the hole over the signal light until it reaches the release tab which is invisible from the top and about 5" deep. Then slide the light out. the visible tab right below the hole is just a slide bar.
Solution #1
posted on May 05, 2009
Rank: Wiz
Rating: 81%, 16 votes
if it is a e36 model just slid a ruller or somethig simuller between the light and flasher unit and it should slide forwerds
Popular Solutions for Cars
Questions and Unsolved Problems for Cars
Is the dipstick on the 5.3 motor
in 1999 Z-71 supposed to read
1/2 way in the operating zone when...
(More)
Is the dipstick on the 5.3 motor
in 1999 Z-71 supposed to read
1/2 way in the operating zone when full 6 qts??
I have a 1995 Legacy LS 4 cyl 4 speed automatic, 201k. I had the transmission fluid and filter...
(More)
I have a 1995 Legacy LS 4 cyl 4 speed automatic, 201k. I had the transmission fluid and filter changed on Thursday, 12/18/09. It was over full at the time I changed it. Got it back and it ran well for a day. Since Friday, it has on occasion lurched and shuddered trying to get into gear (out of first and/or second). I don't know what it means or what is causing this. Any help is appreciated.
my heater does not work in my car, how do i know if it is the thermostat or the heating core
my hyundai 2003 santa fe` wiper on both side doesn`t go down completely after that saturday the 19th...
(More)
my hyundai 2003 santa fe` wiper on both side doesn`t go down completely after that saturday the 19th blizzard. its stop about 30 degree.
no spark no fuel no start! replaced and checked everything,fuses,grounds,relays,coil,...
(More)
no spark no fuel no start! replaced and checked everything,fuses,grounds,relays,coil, plugs,wires,distributor,crank sensor,jumped fuel pump, works. timing right on, last code given was P1500, changed fuel pump relay, still nothing, checked for ecu power supply relay #.3 is none? also checked for relay #13 ho2s also none? Fuse 18 & 15 good, 1996 VW golf gti 2.0 L4 Automatic...now what?
