Question about 2006 GMC Yukon Denali
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
all you gotta do is carfully pry the dash panel off (prying from the far left end is easiest) completely remove panel. then there are 2 clips that hold the factory sterio in place. push on the both clips while pulling the radio out. simply disconnect the wiring harness from the back of the radio. using an adapter avaliable at your local radio shop (scosche p/n gm02, mdarb and gm1483b) wiring harness, dash install kit, and antenna adapter. then simply match the colors on the new radio's harness to the adapter harness, crimping each connection with a "but plug". then simply follow the instructions included with the dash install kit to assemble the kit.connect the antenna adapter to radio, plug in all cables. test to see if everything works properly before the final install. install sterio into dash install kit, re installing kit where origional radio was. then simply put the panel back in its place by firmly pushing on it untill it snaps into place. then enjoy your new radio!
Posted on Jan 04, 2009
3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!
Posted on Jan 07, 2009
Under the drivers seat at the rear is a black plastic cover. Remove the cover , it is over the main harness to the seat. Unplug the seat harness and inspect the connection. I see alot of these get knocked loose or get corroded. Good Luck.
Posted on May 14, 2009
Try this remove the ckt breaker for the power seats the ckt breaker is located in the fuse box inside down by the drivers left foot. leave breaker out for about 10 seconds then reinstall it and see if the seat starts moving. If it does there is a reprogram for this and needs to be done by a dealer or someone who has access to be able to reprogram your vech.
several things could cause your heated seats to not work. If the seat and heated seat seat stopped at the same time could be the reprogram could fix it. If the heated seat quit working at a differant time it could be the seat heater element. get a schematic of the heated seat and ohm the wires for the element. If either element tests open then the element will need to be replaced. You might as well replace both of them at the same time since the seat covers have to come off to replace the seat heaters.(back and bottom ) If one element is bad then both heaters quit working.
Posted on Feb 20, 2010
hello, have someone check all fuses-and plugs for the power seat, they may be a relay for this problem, can call autoparts store and ask about any relays for the heated seats and the power seat, if thats not it you may have to replace, electric motor for seat, sounds like a fuse, the way it all quit working..
Posted on Feb 25, 2010
Tips for a great answer:
Jun 27, 2014 | 2001 GMC Yukon XL
Aug 26, 2011 | 2003 GMC Yukon XL
May 13, 2011 | 2007 GMC Yukon XL Denali
Feb 02, 2011 | 2003 GMC Yukon XL
Feb 25, 2010 | 2005 GMC Yukon Xl Denali
Nov 14, 2009 | 2007 GMC Yukon XL Denali
May 14, 2009 | 2006 GMC Yukon Denali
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: