Question about 1994 Ford Explorer Limited
Your fuel filter needs changed as well as your spark plugs coil ..have an emissions test done ..it will save you money
Posted on Oct 23, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I personally would check the fuel pressure. Then I would go back to the coil. I have seen brand new bad coils out of the box. The symptoms of a loss of power point to this component, especially if the car idles well, but loses power when accelerating. Please do not rate this reply - we all are left to grasp at straws since you have changed pretty much everything. Good Luck. Please post the final fix of the problem.
Posted on Oct 28, 2008
while holding the switch in the up position, bang on the middle part of the door panel, if the motor is stuck then this will usually unstick it. but if motor is running then you will need a new window regulator.
Posted on Jan 22, 2009
look at the steering column below the ign lock and tumbler there should be a small hole turn key to on pos and push a small rod up the holethis then should release the lock and tumbler,no hole then wheel and coumn has to be stripped to get to lock retainer
Posted on Oct 05, 2009
the maf sensor (mass airflow) is located under the hood, it is installed in the air intake duct between the air cleaner housing and the throttle body.
Posted on May 21, 2010
Tips for a great answer:
Jan 08, 2015 | 1994 Chrysler LHS
Oct 23, 2013 | 1994 Ford Explorer Limited
Aug 13, 2009 | 1994 Ford Explorer Limited
Oct 15, 2008 | 2000 Ford Explorer
Aug 25, 2008 | 1994 Ford Explorer Limited
Jul 26, 2008 | 1999 Ford Explorer
85 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: