Question about 1997 Lincoln Continental

1 Answer

Alarm disable when you turn the key over all the lights come on but it will not start the anti theft light is flashing would that keep it from starting. it has the numbers under the door handle on the outside and the kids were pushing the buttons would that mess up the alarm system and not let it start?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

They changed the code dealer will reprogram it

Posted on Oct 23, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fastboyz
  • 674 Answers

SOURCE: 1999 navigator

i know this worked with my 99 navigator 32 valve used a viper car starter.

Lincoln

Navigator

1997-2003

Remote Starter Wiring Colors and Notes

Function
Vehicle Color
Location

Start:
RED/LT. BLUE
IGNITION SWITCH HARNESS **

Ignition #1:
D BLUE/GREEN
IGNITION SWITCH HARNESS

Ignition #2:
GRAY/YELLOW
IGNITION SWITCH HARNESS

Ignition #3:
RED/BLACK
IGNITION SWITCH HARNESS***

Accessory:
BLACK/LT. GREEN
IGNITION SWITCH HARNESS

Brake Light:
L GREEN (+)
AT SWITCH ABOVE BRAKE PEDAL

Tach Signal:
WHITE/PINK
AT POWERTRAIN CONTROL MODULE *

Parking Lights:
BROWN (+)
AT HEADLIGHT SWITCH

Headlights:
RED/YELLOW (+)
AT HEADLIGHT SWITCH

OEM Alarm Disarm:
D GREEN/PURPLE (-)
DRIVER KICK PANEL

OEM Alarm Arm:
N/A


Diesel Glow Plug:



Clutch Bypass Wire:



Notes:
* Powertrain Control Module (PCM) Located On Passenger Side Of Engine Compartment On Passenger Wheelwell. This Wire Can Also Be Found At the Firewall Harness On the Driver's Side of Vehicle. ** This Vehicle Is Equipped With Ford's PATS Anti-Theft System. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. *** Must power ign3 using a relay. Tap relay coil to ign3 connection of remote start along with bypass module. No diode isolation is required.

Posted on Aug 25, 2008

philriden
  • 146 Answers

SOURCE: 2002 Licoln Navigator - Car won't start - just keeps turning over

Get inside the car - with your remote - lock and unlock the doors, then try to start it. Let me know if that works. If not, I'll get you some more info. Phil

Posted on Jan 16, 2009

michigan man
  • 3533 Answers

SOURCE: I have a 2008 lincoln MKZ - the anti-theft

try taking the positive side of the battery off for about 3 seconds and then put it back on and see if this resets it

Posted on May 02, 2009

jaysonemanme
  • 500 Answers

SOURCE: my check engine light does not flash when i turn key before start

bulb is probably blown... you have to remove the instrument cluster to change the bulb

Posted on May 23, 2009

  • 9 Answers

SOURCE: How can I disable the anti theft system? It will

do this, dont use the button or any button to lock your doors, just manually lock it. It will stop then. Then you can fix the problem, under the mat on the back of the trunk there should be a black box back there, if you open that up there will be a sensitivity level, where you can make it so low nothing would set it off or so high even rain would make it go off. Or you may need a new box, but that would have to be done by chevy due to codes for that car

Posted on Nov 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 explorer alarm disables. Motor dies


Anti-theft system can keep vehicle from starting , Alarm is for vehicle content theft , open door without key alarm sounds (horns) ! PATS - passive anti theft system PATS enables and disables the engine from starting ,it will not cause the engine to die ! You have some other kind of problem ! If the vehicle engine doesn't turn over an red light on top of dash flashes fast ,then you have anti-theft system problem !
PATS differs from the perimeter anti-theft system in that PATS enables and disables the engine from starting. If equipped, the perimeter anti-theft system protects the perimeter of the vehicle (doors, hood and trunk) and sounds an alarm.

Aug 17, 2016 | Cars & Trucks

1 Answer

My 2000 ford taurus won't start I turn the key it turns on but won't turn over. My theft light keeps flashing could that be the reason it won't start?


it can be the issue... some car alarms would cut of gas to prevent theft..... now you are victim of car alarm..... usually car owner have more problems with anti theft systems, than thiefs.....
if you have some remote controlled alarm, try to turn on and off alarm and try again....
if that won't help, usually there is somechanical switch to turn off that alarm, it's usually hidden somewhere and you need key for it...

Feb 23, 2016 | Ford Cars & Trucks

1 Answer

Vehicle will not start! Replaced the battery but it will still not turn over. Oil light, battery and engine light come on when initially trying to start.


Is the security light on or flashing when trying to start the vehicle .
Anti-Theft The passive anti-theft system (PATS) consists of the following components:
  • Anti-theft indicator
  • Encoded ignition key(s) (the key contains a transponder)
  • PATS transceiver
  • Powertrain control module (PCM)
PATS will disable the vehicle from starting if there is:
  • a damaged PATS key.
  • an unprogrammed PATS key.
  • a non-encoded key (a conventional key or one that does not have any electronics).
  • damaged wiring.
  • a damaged transceiver.
  • a damaged PCM.
If it is a anti-theft system you will have to take it to the dealer .This system will keep the starter from spinning the engine .

Oct 30, 2015 | 2007 Ford Freestyle

1 Answer

How do you reset the anti theft on a 1996 Chevy Cavalier Z 24? car starts then anti theft light flashes and the car shuts off


please proceed the steps and fix it. God bless you
Instructions
    • 1
      Insert your car key into the Cavalier's driver-side door lock.

    • 2
      Turn the key to the lock position twice.

    • 3
      Turn the key to the unlock position on the lock twice. Your alarm should now be disabled.

    • 4
      Open the hood and loosen the retaining nut on the cable clamp running to the negative battery cable.

    • 5
      Lift up on the cable clamp to cut power to the battery.

    • 6
      Wait 1-2 minutes and then reconnect the clamp and tighten the battery cable clamp to the battery terminal. Your alarm is now reset.

May 31, 2013 | Cars & Trucks

1 Answer

2003 ford expedition wont start and the anti theft light is clicking and flashing fast


Turn your key all the way back towards you in the battery only postion. Then press and hold the red alarm flashing button til you hear the beeping noise it makes. This will disable your alarm and your car will start.

Nov 13, 2012 | 2003 Ford Expedition

1 Answer

07 ford focus anti theft light flashes all the time


If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key's key-less entry signal, or there may be a fault in the anti-theft module or wiring.
There is a reset procedure to stop this anti-theft light flashing.many a times this helps The reset procedure is as follows:-- Reset the alarm by locking and unlocking the drivers side door.Do this a couple of times and then check it will reset the factory security system . If the reset procedure does not helps then its time to get the anti-theft system checked.There is a short circuit in the anti-theft system wiring. For more detailed help on this anti-theft light blinking issues please click on the link below http://www.aa1car.com/library/troubleshoot_antitheft_system.htm
Thanks. you can rate this solution and show your appreciation.

May 18, 2010 | Cars & Trucks

2 Answers

ANTI THEFT LIGHT KEEPS FLASHING ON AND OFF


Did you steal it? I heard about you thieves who steal cars then put new transmissions in!!
Seriously, try this, it may help...
Put the key in the ignition, and turn forward all the way just before cranking. Then within 5 seconds, locate, press and hold in the valet/overide button, found under the dash area, (push button, spring loaded) until the installed LED (the blinking light) in your dash area goes on solid, and the siren chirps once. (Your valet switch might be the toggle (on/off) type. in this case, key on, flip switch in opposite direction, then turn the key off.) This should reset the alarm, and reset the grounded relay on the starter wire, allowing you to start the engine. At this point, the only thing working would be the keyless entry from the alarm, if it came equipped that way. Just Repeat these steps to place it back to usable armed mode. You may get 2 chirps, confirming it, and the lights may flash twice as well. That should do it. Check out www.explorerforum.com

Dec 04, 2009 | 1996 Ford Explorer

1 Answer

Replaced the alternator, now anti theft won't disable


The ignition lock anti-theft switch (19A438) detects if the ignition key cylinder is broken or "slam pulled" during a theft. The ignition lock anti-theft switch is always monitored by the remote anti-theft personality (RAP) module. This allows the alarm system to be triggered in the case that the ignition lock anti-theft switch detects tampering of the ignition key cylinder (even in the event that the alarm is not active at the time).
Refer to the Section 501-14B for more details on the keyless entry remote transmitter (15K601).
The door open warning lamp switch (14018) communicates to the RAP module through the generic electronic module (GEM). This input to the RAP will cause the anti-theft alarm to be sounded if the anti-theft alarm was armed.
The door disarm switches are assembled into both LH and RH lock sets. The door disarm switch must be triggered before the mechanical lock unlocks. This is to prevent the anti-theft alarm from activating when it should have been disarmed.
The RAP module controls the anti-theft system and is the brains of the keyless entry system. The RAP module communicates with the GEM to request that the interior lights be turned ON/OFF with use of the keyless entry remote transmitter, and the GEM communicates to the RAP to inform when the door is opened. Refer to Section 418-00 for inter-module communication.
The RAP module has three wire connectors attached to it:
  • The antenna for the keyless entry remote transmitter.
  • 26 circuit connector (C256).
  • 22 circuit connector (C257).
In addition to the perimeter alarm that uses the door open warning lamp switch, the RAP module also uses the ignition lock anti-theft switch and the autolock/relock feature to prevent theft of the vehicle. For a full description of the autolock/relock system, refer to Section 501-14B .
The THEFT LED is found on the instrument panel between the tachometer scale and the needle pivot point. The LED is illuminated during prearming and flashes when armed or triggered.
Prearming and Arming the System
The system can be armed if:
  • The ignition is OFF.
  • The PANIC alarm is OFF.
  • All doors are closed.
There are two ways to prearm the system:
  • Press the LOCK button on the transmitter.
  • Open a door, press the power door lock button and close the door.
After 30 seconds the system will be armed and the theft indicator in the cluster will flash every two seconds.
Disarming an Untriggered System
An armed system will be disarmed with one of these valid actions:
  1. Pressing the UNLOCK button on the transmitter.
  1. Placing a key in the door and turning to UNLOCK.
  1. Turning the key to RUN or ACC.
The anti-theft alarm can be triggered by the following conditions:
  • The ignition cylinder is damaged with or without the RAP being armed.
  • A door is opened without disarming the armed RAP module.
The remote transmitter can activate a panic alarm which is similar to an anti-theft alarm, but does not deactivate the starter or cause the theft indicator to flash.
Disarming a Triggered System
If the system has been triggered, (the horn honks, the lights flash, and an external starter interrupt relay is engaged), the system can be disarmed by:
  1. Pressing the UNLOCK or PANIC button on the transmitter.
  1. Putting a key in the door and unlocking the door.
  1. Turning the ignition to RUN/ACC (Turning the key to RUN/ACC will not disarm an alarm that has been triggered by the ignition lock anti-theft switch.).

Apr 10, 2009 | 1997 Ford F150 Regular Cab

1 Answer

Car want start


yes cut the power to it

Jan 03, 2009 | 2001 Ford Focus

1 Answer

Factory alarm 97 grand prix


1st the system alarm is intagrated into the engine control electronics, it can not be disabled without poss damage to ther systems and controls, 2nd the most common cause of your issue is the sensor in the ignition lock cylinder being defective, this is the most common issue on all GM anti-theft systems.

Nov 18, 2008 | 1997 Pontiac Grand Prix

Not finding what you are looking for?
1997 Lincoln Continental Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

fordexpert

Level 3 Expert

5474 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...