Question about Cars & Trucks

1 Answer

My 1991 v6 Toyota 4runner has a bad knocking sound in behind the motor

Posted by on

  • michelle
    michelle Oct 22, 2013

    I have taken off the valve cover and no shaveings in oil nor over heads cams are good what to do

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 64 Answers

Flywheel or flex plate bolts loose Or...... Big end bearings in motor

Posted on Oct 23, 2013

Testimonial: "I am really thankfull I can get some advice"

  • John Unwin
    John Unwin Oct 23, 2013

    If you pull the transmission out check flywheel or flex plate bolts

  • John Unwin
    John Unwin Oct 23, 2013

    If no problem found it is easier to get the sump off to check your big end bearings. Make sure you mark the caps on the big ends before removing

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
salvidordali
  • 103 Answers

SOURCE: Replacement engine for 1988 4runner

The Camery motor won't work, and neither will the 3.2. Go to http://www.unitextrading.com/
These guys are the best. Champagene motors at beer prices. These guys will help you out. Don't forget to vote. Thanks

Posted on Jan 19, 2009

  • 32 Answers

SOURCE: Power Window motor is bad in a 1991 4runner rear door

if its the back tailgate window you remove the cover that hides everything inside the door and use some tape to stick the window shut while removing the window mechanisim and then undo the motor its only held on with a few screew's and replace and put it back togeather and should be all good

Posted on Apr 12, 2009

  • 184 Answers

SOURCE: 4runner toyota v6

most toyota 4wd's you can lift the rubber dust flap that seals the inner guard to the chassis rail(look past the front wheels & wishbone suspension arm).should be able to see the starter on the left side of engine(aust/nz model)maybe the same fro US model,or check other side.removing the sump guard/tray will help you see from underneath real easy.hope this helps..also note that most of these starters usually fault on the solenoid button and strike plates.check these first they are in the triangular end plate,the round one is the motor and has brushes in that end cap,you may not have this model str,it is common here.

Posted on Aug 31, 2009

  • 881 Answers

SOURCE: What other motors can replace the factory 94 toyo 4runner V6 3.0?

NO your best bet is to remove both heads and send them away for crack testing and surface grinding plus make sure the block has a flat and clean serface ,no water holes eaten away and near to the cylinder bores, if all ok then get the heads done and tighten down to correct tension which you will get on the VRS (valve regrind set). then it will last for years

Posted on Oct 01, 2009

caninnova
  • 9 Answers

SOURCE: How do I repair a leak on a Power Steering Gear Box on my 91 Toyota 4Runner

chances are that the high pressure side of the pump is leaking

Posted on Apr 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the knock sensor located on a 91 toyota 4runner with a 3.0 v6


which engine exactly????
The 3VZ-E

btw , the cam drive can make noise and make the sensor go nuts.
so we never just throw in this $185 sensors.
not ever.

FIRST GOOGLE HIT
http://www.yotatech.com/f2/knock-sensor-wire-3vz-e-34186/


OR ALLDATA.COM
OR ANY REAL TOY FORUM NOT , FIXYA.
OR THE REAL FSM SOLD BY HELM.
OR?

Post symptoms and ask for why it fails.

Feb 16, 2015 | 1991 Toyota 4Runner

1 Answer

Location of knock sensor on 95 3ltr 3vz-e 4runner


under intake manful on top center of engine block

Dec 16, 2014 | 1995 Toyota 4Runner

1 Answer

My toyota 4runner v6 engine seems to be stuck


Check the pulley behind the fan clutch, remove the belts and check for a seized pulley, the fan should spin by hand with the pulley.

Feb 25, 2013 | 1995 Toyota 4Runner

1 Answer

How do I repair a leak on a Power Steering Gear Box on my 91 Toyota 4Runner


chances are that the high pressure side of the pump is leaking

Apr 17, 2012 | 1991 Toyota 4Runner

2 Answers

1991 v6 3.0l 4runner starts when cold and when warms up stalls out


my experiences with toyota 4runners is that the ignition will do this when it is going bad. another problem that could cause this is a faulty injector that when it heats up it will short out.Hope this helps

Apr 17, 2010 | 1991 Toyota 4Runner

1 Answer

Power Window motor is bad in a 1991 4runner rear door


if its the back tailgate window you remove the cover that hides everything inside the door and use some tape to stick the window shut while removing the window mechanisim and then undo the motor its only held on with a few screew's and replace and put it back togeather and should be all good

Mar 22, 2009 | 1991 Toyota 4Runner

1 Answer

Replacement engine for 1988 4runner


The Camery motor won't work, and neither will the 3.2. Go to http://www.unitextrading.com/
These guys are the best. Champagene motors at beer prices. These guys will help you out. Don't forget to vote. Thanks

Jan 19, 2009 | 1988 Toyota 4Runner

1 Answer

Engine knock 2005 4Runner V8


one or two motor mounts are bad!!

Dec 30, 2008 | 1995 Toyota 4Runner

1 Answer

Timing the cams on a toyota 3vz-e 3lt v6


there should be notches in the backing plate. or lines by the bolt holes on the top mark as fixya please thanks

Oct 01, 2008 | 1991 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...