Question about 1999 Ford Contour

2 Answers

Engine coolant fan wont come on. The fan motor is fine. whats next?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 216 Answers

You still have many other components in that system that has to be in working order for the cooling fan to work properly. The cooling fan is turned on when engine temp reaches a predetermined temp, usually around 220-230 degrees F. the ECT (engine coolant temp) sensor siganls the ECM (Engine Control Module) to ground the cooling fan relay or cooling fan module(if equipped) and if the cooling fan fuse is good and the fan has power to it the realy will complete the ground for the fan to run. You may need to have a qualified technician diagnose the problem if the obvious things like fuses and good grounds are not the problem.

Hope this helps.

Posted on Oct 23, 2013

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

Coolant temp sensor

Posted on Oct 23, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 38 Answers

SOURCE: 1998 ford escort what to llok for ? car wont start

Needs A new Battery and Disconneck the Fan Motor so you can have it looked at ASAP.OK....

Posted on Aug 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cooling fan wont come on car running at a high tem


You could verify fan motor is good by using jumper wires from battery to the fan motor. If the motor is good, you will probably need a wiring diagram and at least a test light to start checking the fan circuit. There will be a cooling fan relay that when signaled, will send power direct to the fan. The signaler to relay to turn the fan on may be the engine computer when the coolant temperature sensor tells it engine is getting too hot- or it may be signaled on by a fan temperature switch mounted in the radiator. When coolant reaches a set temperature the switch closes contact, and the relay is energized to pass power on to the fan. One could pull the relay and with key on, use test light to probe the terminals where relay plugs in. The power feed for the fan should light up the test light on one of the terminals, verifying power is still available to turn the fan on. Next one could check if the signaler to turn the relay on is working.
See? So you do need a wiring diagram to see how the circuit is wired. But the first step is to verify fan motor is good. Good luck, Nigel.

Aug 27, 2013 | Vauxhall Cars & Trucks

1 Answer

Cooling fan does not run?


At the main fuse and relay box, check the 30A EGI INJ fuse. If OK, the main relay closes to apply power to the cooling fan relay. Next, check the 30A FAN 1 and FAN 2 fuses.If OK, power is being applied to the fan control module. The PCM processes engine coolant temperature sensor input and sends a signal to the fan control module which, in turn, causes the cooling fan motor to operate. Fan failure could be caused by malfunction of the cooling fan relay, the fan control module, the engine coolant temperature sensor, the cooling fan motor itself, or the PCM

Oct 06, 2012 | 2005 Mazda MPV

1 Answer

4.1 engine. cooling fan wont come on.How can I test the fan motor? Or is itthe sensor?


disconnect the fan and plug it direct to battery using some jumper wires(speaker wires do fine) and if it runs then there is a problem with a coolant sensor or a cooling fan relay. If it doesn't run, then u need a new fan.

Jun 27, 2011 | 1985 Cadillac Fleetwood

1 Answer

Car ran hot now it wont start at all


THE ENGINE IT WONT CRANK IF OVER HEATED CHECK COOLANT LEVEL IF LOW ADD COOLANT.REPLACE THERMOSTAT AND RADIATOR PRESSURE CAP.IF ENGINE STILL OVERHEAT AT A STANDSTILL OR IN A LONG LINE OF SLOW MOVING TRAFFIC.COOLANT FAN SHOULD COME ON.IF ENGINE OVERHEAT CHECK TO SEE IF COOLANT TURNS ON IF NO.CHECK COOLANT FAN FUSE AND RELAY.IFBOTH OKAY HOTWIRE COOLANT FAN TO SEE IF FAN RUNS IF NO REPLACE COOLANT FAN MOTOR. IF FAN RUNS PROBLEM COULD BE PCM OR THE COOLANT TEMPERATURE SENSOR FAULTY OR DAMAGE WIRE CONNECTOR TO COOLANT FAN.USE A CODE SCANNER TO LOOK FOR PCM OR ECT FAULTS.IF EVERY THING CHECK OUT OKAY LOOK AT ENGINE OIL DIP STICK.IF IT LOOKS LIGHT BROWN OR LIKE MILK SHAKE YOUR HEAD GASKET BLOWN.MAKE SURE YOU HAVE 50/50 ANTIFREEZE AND WATER TO ENGINE TO HELP RAISE BOILING POINT.WHEN OUTSIDE TEMPERATURES HOT.

Aug 05, 2010 | 2000 Oldsmobile Alero

2 Answers

My electric fan wont come on.


First check the fuse,then check to see if the coolant level in the radiator is low,then if you can check the cooling fan relay,and the cooling fan motor to make sure it is good,if all this checks out fine,then replace the coolant sensor,and bleed the cooling system of all the air in it.

Jul 20, 2010 | 2001 Chevrolet Cavalier

2 Answers

Radiator fan not working


CHECK FUSE AND RELAY.IF ALL IS GOOD.HOT WIRE COOLING FAN USING JUMPER WIRES.USING CAR BATTERY.IF FAN RUNS.ITS GOOD.IF FAN DONT RUN.REPLACE FAN ELECTRIC MOTOR.ALSO SCAN IT. TO MAKE SURE COOLANT TEMPERATURE SENSOR IS NOT OPEN.MAKE SURE ENGINE COOLANT TEMPERATURE SENSOR AND COOLANT TEMPERATURE READS SAME ON SCANNER IF NOT REPLACE THE COOLANT TEMPERATURE SENSOR. SEE IF COOLANT TEMPERATURE IS BAD THE COOLING FAN OR FANS WONT RUN.

Sep 07, 2009 | 1997 Plymouth Voyager

1 Answer

My 2000 jeep grand cherokee is overheating when i drive less than one mile and the coolant light is going off. i replaced the thermostat and checked the coolant level (which is fine) but it is still...


replace your cooling fan motor relay because if you dont eventually your radiator will explode and this will cause your engine block to crack and then if your fan isn't blowing the engine will continue to overheat and the engine will seize and then you need a new engine. A cooling fan motor relay is around $30.

Jul 26, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Ford Contour Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...