Question about 2003 Mitsubishi Eclipse Spyder

1 Answer

My top wont go down i already checked to switch that is not it. i can here clicking and motors just not moving.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 174 Answers

The mechanics are hidden in the trunk ,must reveal.Bad pump relay will keep the top stucked.Broken mechanism need visual inspection.Help gently by hand,may have luck to move it,beaware may not get up again.

Posted on Oct 22, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power seat wont move backward in 2009 Hummer H2


first check to see if anything is blocking the tracks if so remove. next it could be the switch if passenger side has controls try swapping them if passenger side does not have controls take switch off and check the resistance in the switch when in the on position (forward or back) if it is not the switch motor is probably burned out if passenger side again has motor try swapping. (passengers don't need to be comfortable) or just buy a new motor. hope this helps

Nov 20, 2013 | 2009 Hummer H2

1 Answer

95 monte carlo passenger side window wont work


When a window switch is not being used, it has the ground circuit on both sides. Then when you move it to up or down, you apply power to one side of the motor. Thats how the motor is able to run in both directions.
So you should have power on one side or the other when you move the switch. Have you checked it for power and ground ?

Jul 26, 2013 | 1995 Chevrolet Monte Carlo

1 Answer

My back window wont roll up at all


if there is a pause from when the motor starts to when the window moves it is a worn or faulty window regulator, the motor not starting when you press the up on the switch could be a bad switch, if you have a meter check for voltage at the switch when you press up.

Oct 11, 2012 | 2006 Pontiac Grand Prix

1 Answer

My convertible top on my mustang gt wont go up or down


Check to see if the top motor is running when you press the top up switch. Car has to be in park with emergency brake engaged. If motor runs but top will not move or binds then one or both of the lift cylinders are bad. Usually there will be hydraulic fluid leaking from the cylinders if one or both will not hold pressure. Replace cylinders if bad. The top could probably be manually closed if the lift cylinder arms are detached from the top frame.
If motor does not run when the switch is pressed then check your fuses, the switch and the connector at the top motor to see if it is getting power.

Jul 15, 2012 | 1991 Ford Mustang

1 Answer

1994 maxixma windshield wiper makes a clicking sound wont work.


More than likely the wiper transmission has come off the motor drive shaft, pull the motor and check this.

Jan 20, 2012 | 1994 Nissan Maxima

1 Answer

Convertible top wont open, i hear clicking i the


Check the relay near the motor. That is what is clicking, trying to engage.

Oct 25, 2009 | 1994 Audi Cabriolet

1 Answer

Electric window doesn't work


Either switch, motor or even the Window Control Relay. Before performing any tasks ensure that the GND (Neutral) exists everywher it's supposed to (motor & relay especially)
To check the motor itself, disconnect it from any wiring an measure if there's any resistance betveen motor connection pins. or when its disconnected force some 12 volts to the motor and it will move up or down if it's fine. If it moves then go to the switch, and using multimeter measure if there comes 12volts. if it does check if it goes out from the switch when pressed. If it does, and you've already tested the motor and it was ok so the problematic is Relay (might be open circuit, defective soldering on the relay's circuit board). f nothing comes out from the switch just replace it.

If you need any further assistance just let me know.

Best of luck

Jun 26, 2009 | 2002 Chevrolet Impala

2 Answers

Mustang 2001 convertible top goes up but not down.


Sounds like the switch is bad. Also check the relays. You might have one for up and one for down.

May 23, 2009 | 2001 Ford Mustang

1 Answer

Convertable top wont go down..I hear motor running


Your top motor is in the trunk on the drivers side wall behind the panel. Remove the two screws to remove the cover. Check the fluid level in the reservor. Check that no lines have come off of the pump and have someone pushing the top down button while checking. If this is not the problem, then it is a possibility that the e-brake connection is not working right.

Dec 09, 2008 | 1998 Volkswagen Cabrio

Not finding what you are looking for?
2003 Mitsubishi Eclipse Spyder Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...