Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you haven't figured it out yet, try the two links below. They have pics and diagrams. I haven't done this yet but, Nissan suggesting to have it done. (Sitting in the dealer having oil changed as we speak. They want $90 to replace the 2 filters.) I'm planning on doing it myself to save about $70. Doesn't look too difficult - just a little time. Parts are about $22 at local parts store. hope this helps. (Won't be back on this forum. So won't see any response you submit back).
Posted on Dec 11, 2008
the filter is behind the glove box. pull the 2 clips on both sides of glove box. then remove glove box. the filter cover should be right there and just unclip the cover and replace filter.
Posted on Jan 19, 2009
According to the shop manual you do not have one.
Air Distribution and Filtering Printable View (79 KB) NOTE: The air distribution system of this vehicle cannot be equipped with a cabin air filter.
There are 2 sources of air available to the air distribution system:
Air distribution within the vehicle is determined by the electronic manual temperature control (EMTC) function selector switch position, or is controlled by the EATC system in the AUTOMATIC mode. The air distribution mode on EATC vehicles may be overridden by the driver if desired. Air distribution doors are used to direct airflow within the heater core and evaporator core housing and the plenum chamber. An electronic mode door actuator is used to position these air distribution doors. One air inlet mode door is used to switch between FRESH or RECIRC air inlet. An electric actuator is used to position the air inlet mode door.
Air enters the passenger compartment from the:
Posted on Mar 08, 2009
I'm going to send you exploded view of the glove box and the in cabin micro filter cover illustration. Remove the two upper screws on the glove box and carefully pry metal clips loose.
Disconnect glove box lamp electrical connector. Do not let glove box assembly hang from glove box lamp harness.
Remove three lower screws and remove damper clip from glove box door. Separate glove box housing and passenger instrument lower panel.
Remove three screws and remove in cabin micro filter cover.
Remove in cabin micro filters from front heater and cooling unit assembly.
Note When installing two new in cabin micro filters ensure that the filters are facing in the direction indicated by the direction arrow for the airflow. Direction arrow is printed on side of in cabin micro filters.
Install in cabin micro filter cover. Reinstall glove box.
Posted on Oct 10, 2009
Testimonial: "Finaly I found the air flow door with three screws and removed it. The filter will need replacement soon. It is been replaced one time at the dealer."
from memory, I believe it is under the front bumper, I can't remember left or right, may need to move a plastic stone shield to gain access. Good luck
Posted on Nov 20, 2009
Tips for a great answer:
Feb 05, 2017 | Holden Cars & Trucks
Oct 19, 2016 | Holden Cars & Trucks
Oct 10, 2016 | Holden Cars & Trucks
Jun 14, 2016 | Holden Cars & Trucks
Jan 04, 2015 | Holden Cars & Trucks
Jul 28, 2014 | Holden VT Cars & Trucks
Jun 30, 2014 | 2006 Holden Commodore SS
Jun 10, 2014 | 2006 Holden Commodore SS
Feb 04, 2011 | Chevrolet Lumina Cars & Trucks
Oct 18, 2017 | Cars & Trucks
19 people viewed this question
Usually answered in minutes!