Question about 2007 Chevrolet TrailBlazer SS

Open Question

Heater core replacement 2007 Hyundai tucson - 2007 Chevrolet TrailBlazer SS

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jturcotte
  • 8518 Answers

SOURCE: dyi instructions for removal/replacement of heater

Please let me know if you have any questions, and thanks for using FixYa.

  1. Drain the engine cooling system.
  2. Remove or disconnect the following: Negative battery cable and Heater hoses from the heater core
  3. Remove the instrument panel as follows: .
    1. Set the parking brake and block the wheels.
    2. Disconnect the parking brake release cable from the parking brake lever.
    3. Unfasten the screws that retain the DLC instrument panel left side sound insulator. Feed the DLC through the hole in the sound insulator.
    4. Unfasten the right side sound insulator panel screws and remove the panel.
    5. Unfasten the screws that attach the instrument panel left side sound insulator to the knee bolster and cowl panel.
    6. Unfasten the nut that attaches the left side sound insulator to the accelerator pedal bracket.
    7. Unplug the remote control door lock receiver module electrical connector.
    8. Remove the door lock receiver module from the left side sound insulator. Remove the left side sound insulator.
    9. Unfasten the screws that attach the instrument panel center sound insulator to the knee bolster, instrument panel, heater assembly and floor duct.
    10. Remove the center sound insulator.
    11. Unfasten the screws that attach the courtesy lamp to the knee bolster.
    12. Unfasten the screws that attach the knee bolster to the instrument panel.
    13. Disconnect the lap cooler duct from the knee bolster.
    14. Unplug the lighter electrical connection and remove the knee bolster.
    15. Unfasten the steering column-to-instrument panel nuts and lower the column.
    16. Unfasten the screws that attach the instrument panel accessory trim plate to the instrument panel.
    17. Remove the trim plate and unplug all necessary electrical connection.
    18. Remove the heater and/or air conditioning control assembly.
    19. Remove the radio and the storage compartment assembly (if equipped).
    20. If necessary, remove the instrument cluster.
    21. Unfasten the left and right instrument panel pivot bolts and the panel lower support bolt.
    22. Unfasten the speaker grilles retaining screws and remove the speaker grilles.
    23. Remove the windshield defroster grille using a flat-bladed prytool. Start at one end of the grille and work your way down the grille.
    24. Unfasten the 4 instrument panel upper support screws.
    25. Tag and unplug all necessary electrical connections.
    26. Remove the instrument panel from the vehicle.
  4. Remove or disconnect the following:

    Air inlet assembly, if equipped , Vacuum hoses Heater assembly studs, from inside the engine compartment, Blower motor resistor Stud from inside the heater case assembly; the stud is located behind the blower motor resistor Heater assembly-to-chassis screws, Heater assembly from the vehicle Access cover screws and cover from the heater assembly Heater core from the heater case assembly
    jturcotte_2224.gif

    Fig. View of the heater case assembly

    jturcotte_2225.gif

    Fig. View of the heater case cover

    jturcotte_2226.gif

    Fig. View of the heater core

    jturcotte_2227.gif

    Fig. Heater core mounting

To install:
  1. Install or connect the following:

    Heater core to the heater case assembly, Access cover to the heater assembly and the cover screws, Heater assembly to the vehicle Heater assembly-to-chassis screws and torque them to 40 inch lbs. (4.5 Nm) Stud, working from inside the heater case assembly; the stud is located behind the blower motor resistor, Blower motor resistor Heater assembly studs, working inside the engine compartment, torque them to 17 inch lbs. (1.9 Nm), Vacuum hoses, Air inlet assembly, if equipped
  2. Install the instrument panel as follows:
    1. Rest the instrument panel on the lower pivot studs.
    2. Attach the electrical connections.
    3. Install but do not tighten the 4 upper instrument panel support screws.
    4. Install the left and right panel pivot bolts. Tighten the bolts to 102 inch lbs. (11.5 Nm).
    5. Install the panel lower support bolt. Tighten the bolt to 102 inch lbs. (11.5 Nm).
    6. Tighten the upper support screws to 17 inch lbs. (1.9 Nm).
    7. Install the windshield defroster grille and the speaker grilles.
    8. Install the radio and storage compartment assembly (if equipped).
    9. If removed, install the instrument cluster.
    10. Install the heater and/or air conditioning control assembly.
    11. Attach the electrical connections to the instrument panel accessory trim plate.
    12. Place the trim plate in position and install its retaining screws. Tighten the screws to 17 inch lbs. (1.9 Nm).
    13. Place the steering column into position and install its retaining nuts. Tighten the nuts to 22 ft. lbs. (30 Nm).
    14. Attach the lighter electrical connection and the lap cooler duct to the knee bolster.
    15. Place the knee bolster into position and install its retaining screws. Tighten the Torx® head screws to 80 inch lbs. (9 Nm) and the hex head screws to 17 inch lbs. (1.9 Nm).
    16. Place the courtesy lamp in position and install its screws. Tighten the screws to 17 inch lbs. (1.9 Nm).
    17. Place the instrument panel center sound insulator in position. Install the screws that attach the center sound insulator to the knee bolster, instrument panel and the floor duct. Tighten the screws to 17 inch lbs. (1.9 Nm).
    18. Install the screw that attaches the center sound insulator to the heater assembly. Tighten the screw to 13 inch lbs. (1.5 Nm).
    19. Install the remote control door lock receiver module to the instrument panel left side sound insulator.
    20. Attach the door lock receiver electrical connection.
    21. Install the nut that attaches the left side sound insulator to the accelerator pedal bracket. Tighten the nut to 35 inch lbs. (4 Nm).
    22. Install the screw that attaches the left side sound insulator to cowl panel. Tighten the screw to 13 inch lbs. (1.5 Nm).
    23. Install the screws that attach the left side sound insulator to knee bolster. Tighten the screw to 17 inch lbs. (1.9 Nm).
    24. Feed the DLC through the hole in the sound insulator, place the DLC in position and install its retaining screws. Tighten the screws to 21 inch lbs. (2.4 Nm).
    25. Install the right side sound insulator and tighten the screws
    26. Connect the parking brake release cable to the lever

  3. Install the heater hoses to the heater core.
  4. Refill the cooling system.
  5. Connect the negative battery cable.
  6. Run the engine to normal operating temperatures; then, check the climate control operation and check for leaks.

Posted on Sep 11, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to take heater core hose off a hyundai tucson and flush


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Hyundai Tucson

Dec 14, 2016 | Hyundai Tucson Cars & Trucks

1 Answer

2005 hyundia tucson


Search Results

    2005 Hyundai Tucson Recalls - Cars.com

    www.cars.com/recalls/hyundai/tucson/2005/

    Cars.comLook up all NHTSA vehicle safety recalls for your 2005 Hyundai Tucson, and contact a nearby service center for free repairs.

    2005 Hyundai Tucson Problems, Defects & Complaints

    www.carcomplaints.com/Hyundai/Tucson/2005/
    7 days ago - The 2005 Hyundai Tucson has 199 problems & defects reported by ...January 11: Hyundai Genesis Recalled to Replace Dangerous Tires ...

    Hyundai Tucson Recalls ' RepairPal

    repairpal.com > Recalls > Hyundai
    Other systems that may be affected include: cruise control, push-button start, gear shifter, and Electronic Stability Control (ESC) system. Dealers will replace the brake light switch to correct this concern. ... The stop lamp switch may fail, affecting many vehicle systems including ...

    2005 Hyundai Tucson Recall - Learn About Recalls for 2005 ...

    www.automd.com > Recalls and TSBs > Hyundai Recall > Tucson

Jan 28, 2016 | Cars & Trucks

2 Answers

Blows cold air turn heat on


Search Results

    07 Tucson heater blowing cold air - Hyundai Forum - Hyundai ...

    www.hyundaiforum.com > ... > Vehicle Line Up > Hyundai Tucson
    Dec 16, 2009 - I have a 2007 Tucson, when you turn on the heater it only blows hot air... Join Date: May 2005 ... a low coolant level will exhibit the first stated symptoms of no heat/low heat at idle and increased heat at cruise due to an air ...

    Denlors Auto Blog » Blog Archive » Car Heater Blows Cold ...

    www.denlorstools.com/autoblog/.../car-heater-blows-cold-auto-service-ti...
    Oct 10, 2009 - When a car heater blows cold air, there are several possibilities that should ...... On my Dodge Neon when I turn on the heat it blows out cold air.

    Heater blows only cool air...even w/ defroster on : Buick ...

    repairpal.com > Problems > Buick > LeSabre
    ... Cadillac, Chevrolet, Chrysler, Dodge, FIAT, Ford, Geo, GMC, Honda, Hummer,Hyundai, Infiniti, Isuzu, Jaguar ... I'll turn up the temp on the dual control to get heat,

Jan 28, 2016 | 2005 Hyundai Tucson

1 Answer

Where is the DRL Module on my 2007 Hyundai Tuscon


How to disable DRL (Daytime Running Lights) - TucsonDrivers.com

tucsondrivers.com/viewtopic.php?t=1809
Oct 17, 2006 - I wonder why Hyundai didn't put it on the US models? ... I wish my Tucson had daytime running lights. ... The DRL module on the Tucson in Canada basically puts 12 volts on ... #8 Postby Hermine » Wed Jun 20, 2007 5:39 pm.

Daytime Running Lights (DRL) not working =( - Hyundai Forum ...

www.hyundaiforum.com > ... > Vehicle Line Up > Hyundai Accent
Apr 25, 2008 - Join Date: May 2007 ... Basically, I've noticed my DRL are no longer working. ... Does anyone know what does the DRL module looks like and where I could find it? ... 04 Daytime running lights, CaptAthlon, Hyundai Elantra, 9 ...

Nov 24, 2015 | 2007 Hyundai Tucson Limited

1 Answer

Where are the sensors located on a 2007 hyundai tucson 6cyl.Are where is bank 2 sensor 1 located.


Passenger side exhaust upstream of the cat, however if you are going to replace 1 do both upstream o2 sensors and get them from hyundai, use vin # i believe these use wide band sensors

Apr 17, 2015 | 2007 Hyundai Tucson

1 Answer

The radio in my 2007 Hyundai tucson won't play but won't turn off. The car is off but the radio is still lit up.


remove fuse so as not to discharge the battery for the meantime and replace radio unit later

Mar 07, 2015 | 2007 Hyundai Tucson Limited

1 Answer

How to replace heater core 2005 hyundai tucson


rip out the dash
rip out the sub-dash
drain coolant and freon
replace heat exchanger
recharge freon and coolant
replace subdash and dash
or
drop car off at shop
pay money
drive away
come back
pick car up

Dec 06, 2014 | Hyundai Cars & Trucks

Not finding what you are looking for?
2007 Chevrolet TrailBlazer SS Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...