Question about Cars & Trucks

1 Answer

2008 Dodge caliber. 1.8 sxt. I have 4 error

2008 Dodge caliber. 1.8 sxt. I have 4 error codes. P0420, P0573 and P0113. The vehicle doesn't go into gear. I put it in any gear and jump off the clothes but it just idles. I read on automatics a faulty brake switch would keep it locked on park. Is this tthe same safety features to keep my gears un engaged? Any help would be appreciate

Posted by on

  • raul mangra Oct 22, 2013

    Jump off the clutch** and I also have no brake lights

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 27 Answers

Disconnect the battery for 10 minutes and try to reset the codes.

Posted on Oct 22, 2013

  • raul mangra Oct 22, 2013

    I ttried that. I disconnected the battery and touched the two leads together for 10 minutes. I saw somewhere I should remove fuse 11 for 30 seconds

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dgjtex
  • 405 Answers

SOURCE: 97 Dodge Ram 1500 360 won't idle in gear after warmup.

Idle air control valve is a common problem Might check that first. Is it throughing a check engine light? with that I can help you further.

Posted on Dec 29, 2008

motor1258
  • 6674 Answers

SOURCE: 1997 Dodge Ram 360 5.9 won't idle in gear

Remove IAC motor/valve on side of throttle body that regulates idle especially under load conditions, and clean it & the port good with throttle body cleaner & re-try. If it cures it for a while, then does it again, replace it with new one.

Posted on Jan 03, 2009

  • 2 Answers

SOURCE: trying to replace driver side mirror on dodge caliber sxt electric mirror

if you open the door you can pop off 2 pieces of plastic that reveal 3 bolts. 3/16 (i think)socket works and you will need an extender. but it is literally 3 bolts and that is it. i bought the part from a dealer and it was $40 and they wanted $90 for install. took me 15 min.

Posted on May 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the transmission fluid is


    how to check the transmission fluid on a 2007 to 2012 ...

    ? 1:27
    https://www.youtube.com/watch?v=84QcqI07ubc
    Nov 17, 2014 - Uploaded by thomas brian
    how to check the transmission fluid on a 2007 dodge caliber. please click on my name under the title and ...

    2007 Dodge Caliber SXT 2.0L CVT Transmission Nice ...

    ? 4:15
    https://www.youtube.com/watch?v=v6vDlkHs-GQ
    Nov 22, 2009 - Uploaded by rontonkinkia
    2007 Dodge Caliber SXT 2.0L CVT Transmission Nice ...Conveniently located 10 minutes from Downtown Portland at 19335 SE ... what's the best automatic transmission fluid for my2007 dodge caliber SXT.... please I need ... images for where is the transmission fluid located on ...


Nov 29, 2015 | Cars & Trucks

1 Answer

I have a problemis with my dodge caliber 2009 the transmissoin dos not changing,


how to check dodge caliber cvt transmission ... - CarGurus

www.cargurus.com > Questions > Dodge > Caliber
CarGurusMar 20, 2010 - I bough used Dodge caliber SXT 2008 & i don't know how to check the CVT ... I have a 2009 300c and 2010 caliber and both tranmission are ...

Jul 20, 2015 | 2009 Dodge Caliber

1 Answer

Caliber 2008 sxt 2 litre timing belt or timing chaine wend change the parts. Klm


you have a chain, no change interval needed

unless you hear some noises that the guides are worn

Mar 14, 2015 | 2008 Dodge Caliber

1 Answer

What could issue be when caliber starts fine but dies when put in gear?


it is obvious that under a load the car will not run
first do a tune up and make sure all cylinders are firing,check codes and even do a fuel pressure check

Aug 30, 2014 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

Air pump 2008 dodge caliber


My dodge caliber 2007, makes a really loud noise what is it??? 3 mechanics 7 3 wrong diagnoses later, and Dodge Manufacture telling me it is not something that is a common problem, i found it.. first it was the bearing on the Ac Compressor (WRONG), then it was the idler pulley bearing (wrong), then it was the water pump bearing (wrong). It was the alternator bearing (YEP) 3 mechanics, 2 dodge corporate call, and finally self perseverance finally some one got it right... ME i ho

Apr 05, 2014 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

2008 dodge caliber drivers side powerd mirror replacement


The 2008 Dodge Caliber is versatile and has some unique features, but a low-quality cabin and underwhelming performance keep this model near the bottom of the small wagon list. Pros: Versatile interior, available all-wheel drive, wide range of engine choices. Cons: Sluggish acceleration from CVT-equipped models, low-quality interior materials, unimpressive build quality, several important safety features are optional rather than standard.------------------------------------------vas 5054a

Jan 05, 2013 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

I have 8 throuble codes p0743,p1537,p1504,p0133,p0420,p0113,p0122,p1506,please help i don't know what to do to windstar 98 3.8


P1537

Intake Manifold Runner Control Stuck Open


P1504

Intake Air Control circuit malfunction


P1506

Idle Air Control Over Speed Error


P0112 Intake Air Temperature Circuit Low Input


P0113 Intake Air Temperature Circuit High Input


P0133 02 Sensor Circuit Slow Response (Bank 1 Sensor 1)


P0420 Catalyst System Efficiency Below Threshold (Bank 1)


P0743 Torque Converter Clutch Circuit Electrical



I hate to hear you are havine so much trouble. These are a basic descrition of each of the codes.


If each of these codes are active, i would imagine you windstar isn

Jun 16, 2011 | 1998 Ford Windstar

3 Answers

Is it hard to replace alternator? I heard that you take right wheel off to get to it?


1. Disconnect and isolate negative battery cable at battery. 2. Remove the right front wheel. 3. Remove the underbody air dam.



4. Remove the accessory drive splash shield.



5. Remove the accessory drive idler pulley.



6. Loosen the lower mounting bolt.



7. Loosen the A/C compressor and relocate, pull down and to outboard side of vehicle to make room to remove generator.



8. Unplug field circuit from generator.



9. Remove the B+ terminal nut and wire.



10. Remove the upper mounting bolt. 11. Remove the generator lower mounting bolt.



12. Relocate the battery terminal (1) to the other side of the A/C line (2) for removal of the generator.



13. Rotate generator pulley down.



Dec 14, 2010 | 2008 Dodge Caliber

1 Answer

I have a 2008 dodge caliber sxt iam having temp issues while sitting in park should the cooling fans be running???


The cooloing fan should turn on when the temperature gauge (if so equipped) is just above half way. Under no circumstances should the engine overheat before the fan does come on. The temperature sensor for the computer may not be reading correctly.

Apr 04, 2009 | 2008 Dodge Caliber

1 Answer

07 caliber p0420


Might still be under warranty. P0420 is a catalytic converter efficiency code. Usually this means the catalytic converter is no longer able to do it's job. The computer knows when it is failing and sets this code.

Check with your dealer to see if the catalytic converter might still be covered as it is an emissions component.

Feb 14, 2009 | 2007 Dodge Caliber SXT Sport Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...