Question about 2002 Isuzu Rodeo

2 Answers

My Isuzu Rodeo, with 200k miles idicates on the dash board the "check engine warning" My technicians tried to fix it but they failed. What the possible causes?

Posted by on

  • Jaccar
    Jaccar Oct 21, 2016

    Had the same problem with "Check Engine" light.
    If fuel cap in not on tight enough with three clicks it will come on. If the fuel cap is defective and does not seal even though you would think it has. Buy a replacement one. After replacing cap restart vehicle three or four times and the "Check Engine" light will clear. This has always worked for me. If not then disconnect one battery cable wait 3 minutes and then reattach battery cable.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Make sure they put it on a comperter to check the codes and all senser as well as the o2 Sencer

Posted on Oct 22, 2013

  • 1 more comment 
  • Anonymous Oct 21, 2016

    sensors.

  • Anonymous Oct 21, 2016

    scan first leap second.
    if he has transmission codes, 02 is not it.

  • Anonymous Oct 27, 2016

    1993 rodeo is not a 2004

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 20,706 Answers

Answering hi-jakker
Jaccar wants more answers to this question

the 2002??????
fire your mechanic
he is incompetent.
find a real ASE shop and win. I promise !
the lamp means
scan me.!
using a scan tool. of any kind. (modern OBD2)
the lamp means there are serious problems. and or smog fails,most times SAME.

the problem can be as simple
as a loose gas cap.
really
or you skipped tuneups, the 60,000 mile is important.

there are 100 possible causes
the Book on the car tells you that if you read it.
"the service manual" on all cars show that.

Posted on Oct 21, 2016

  • Anonymous Oct 27, 2016

    fire you mech, for sure.!

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: isuzu rodeo sport 4wd, stuck in 4wd

Don't know if this will help with your exact problem, but I can share with you how I have "fixed" this.

If the 4WD indicator is flashing, then it means the 4WD select switch is working but the 4wd "clutch" hasn't released. Backing the vehicle up slowly, or sometimes just switching into reverse with the 4WD switch in the 2WD position is usually enough to release the 4WD and the 4WD indicator should go off. It after all this, the indicator still does not go off, it could be some issue with the electric 4WD clutch not releasing.
You should be able to tell if the 4WD drive is still engaged by driving slowly in a circle. On drive pavement, the front wheels will "hop" around. Don't do this too fast or too often on drive pavement, since the part time 4WD was not meant for this. The front wheels have to be able to slip in relation to each other, when in 4WD.

Hope this helps and wish you well in your troubleshooting.

Posted on Oct 22, 2008

Vinylking
  • 3 Answers

SOURCE: 2000 Isuzu Rodeo Check Engine Light

After you change the gas cap like everybody tells you. The transmission position micro switch on the floorboard.

Posted on Jul 07, 2008

  • 1 Answer

SOURCE: how to check transmission fluid on 2001 isuzu rodeo

There is no dipstick on your auto trans. Checking it is a real PITA The trans pan has 2 plugs in it. The one on the very bottom is the drain. The one in the corner, up higher in a recess is the check/fill plug. To check, the engine must be warm and running, tranny in P. Remove the plug and fluid should dribble out. If it doesn't it's low, fill until it dribbles out, while engine is running. Obviously the truck must be on a lift or up on jackstands.

Posted on Dec 22, 2008

  • 2 Answers

SOURCE: Check engine light-isuzu rodeo

Gas cap isn't on right. Remove and retighten. Turn it at least 5 times.

Posted on Dec 26, 2008

  • 2 Answers

SOURCE: Dash Lights 1995 Isuzu Rodeo

with lights off and battery disconnected remove the twist knob on the dash that brighten and dims your dash lights and jump the two prongs with a jumper wire. connect battery and turn lights on all your dash lights should work now. if thay don't take the dash screws out and replace the bulbs, it's really easy if you have mechanical skills if not consult a friend that does. now you know the dash light dimmer switch is bad and they are hard to find i found mine in a wreck but until i did i just left the jumper wire in place (about a year and 1/2)

Posted on Jun 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Trouble shoot dash lights out in a 1997 Isuzu rodeo


double posted, why do that.
its answered already,
the "meter fuse"blew.

all warning lights out,
or do you mean the parking lamps out in cluster.
there are scads of waring lights, name some.
the CEL lamp tops list, if out the engine my not run.
does it run? do head lights work and all other lights.?
is the battery in car charged," top 12.6v rested. and you can drive say 10 mile with head lamps glowing full bright?
that be good to know.

Feb 04, 2015 | 1997 Isuzu Rodeo

1 Answer

What does the 2002 Isuzu Rodeo dash light that looks like a cigar mean?


old posts, fun day, flushing the 2016 , crappper,.
the CIGAR means you wont a prize, call Isuzu now for prize.
You get the door prize,


and and endless topic here, and usually never answered.
Due to "NO PHOTOS OF IT"

try this , google it, and find yours
then post the photo of your lamp
here,
now my wild and useless guess.
vertical cigar, with hash marks, is engine overheated.

Jun 29, 2014 | 2002 Isuzu Rodeo

1 Answer

1999 isuzu rodeo is misfiring aome of the


when a coil goes out the other ones are usually right behind the one that failed ive seen them go out as fast as going around the block luckly the costumer was right there when it happened and he had us replace all eight of them.

May 30, 2010 | 2001 Isuzu Rodeo

1 Answer

1991 isuzu rodeo o2 dash light is stuck on


The O2 sensor needs to be replaced. There is a screw on the back side of the instrument panel that is removed and switched to another hole in the circuit board to reset the light for another 90,000 miles. Only a shop manual will have the exact location. You can try and obtain one from http://www.helm.com and buy one using print on demand.

May 19, 2010 | 1991 Isuzu Rodeo

2 Answers

Isuzu Rodeo check engine flashing - leaking transmission fluid


Are there any Isuzu dealers in America anymore? I thought they all left. If you have one still, go to it.

Aug 12, 2009 | 2001 Isuzu Rodeo

1 Answer

Help me solve it


sounds like the earth connection on the back of the dash

Jul 25, 2009 | 2001 Isuzu Rodeo

2 Answers

95 rodeo AT warning light on and truck smoking


broken transmission cooler line is a good guess

May 01, 2009 | 2000 Isuzu Rodeo

1 Answer

Engine knocks 3.2 isuzu rodeo 2000 ? help


You don't say how many miles or give a service history, but, that said I would check the timing belt and tensioner. When tensioner goes bad is often is reported as a loud knock or tick. Usually most evident at low RPMs. Another low cost try is to use a can of seafoam in the oil now, run it a few miles, then change it for a high detergent, low viscousity oil and drive it a while to see if the lifters clean up. engine tick is very common, generally due to lifters oil passages getting sludged up a little for 2nd gen 3.2l's

Feb 18, 2009 | 2000 Isuzu Rodeo

1 Answer

O2 sensor


There should be a reset switch that turns the light off. Some vehicles require a code scanner tool to reset the check engine light. On some Isuzu models you have to remove the instrument cluster and move a screw from one hole marked KSW to another hole with the same KSW marking (it may have tape over the second screw hole). Other Isuzu models may have a small switch on teh back of the instrument cluster or may have a different marking on the screw holes (some were marked wit the letter B on both holes). The O2 light usually comes on at 90,000 mile increments which is when Isuzu recommends changing it.

Jun 12, 2008 | 1993 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...