Question about 2005 Chrysler Crossfire

Open Question

Master lighting switch is on - 2005 Chrysler Crossfire

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C1422 what is this code mean c 1201


Error Code: C1201.
Description: Engine Control System Malfunction.
Trouble area:
- Inspect engine control system.
- Wiring.
- ECM.
Error Code C1422.
Description: Master Cylinder Pressure Sensor Zero Point High Malfunction.
Trouble area:
- Stop light switch Stop light switch circuit
- Master cylinder pressure sensor circuit
- Brake actuator assembly (Master cylinder pressure
sensor).

Jun 01, 2015 | 2010 Toyota Corolla

2 Answers

1995 class a motor home ford chassis brake light switch


The switch is located on the brake peddle where the master cylinder attaches to the peddle remove clip slide master cylinder rod to one side remove switch.

Oct 08, 2013 | Cars & Trucks

1 Answer

1974 VB Bug, brake lights are ON when car is on...stay on when breaks are applied (so virtually driving without break lights as they are always on!


If you look underneath your bug on the driver's side where the master cylinder is you will see 2 electrical plugs plugged into the master cylinder. Each plug has 3 wires. Disconnect both from the master cylinder and see if the brake lights go out. If so, then replace both brake light switches on the master cylinder. You can disconnect one at a time and see if the lights go out that way. Which ever one that causes the lights to go out when disconnected is the bad switch. The light circuit will work with only one switch connected, so if neccessary you can get by on one switch.

Sep 14, 2013 | 2000 Volkswagen Beetle

1 Answer

Does a 1987 gmcjimmy s-15 have a power window relay ot any relays at all cuz my power windows stoped working it runs a 30 amp circut breaker can the circut breaker go bad?


Anything can go bad, but to my knowledge circuit breakers seldom do. If you have a test light, pull the circuit breaker and probe both terminals for a power signal, with the key on. One terminal should show voltage with key on. If not, check the power distribution box for a blown maxi-fuse, or the wiring from that box to your fuse panel.
BTW, no, no relays are in the window circuit. So if the circuit breaker has power to it, put it back in and check for power on the driver's door master switch-one wire on the master should have voltage with key on. If no hot wire to the master switch, check inside the door openings for a broken wire. If you do have one hot wire there. check the power windows ground-the ground wire for the power windows originates at the master switch and goes back into the cabin to a nearby ground. Put one lead of the test light on the hot wire (key on), and probe the ground terminal at the master switch-if your ground is good, the test light will light up. If the ground is lost, no light. Check for a broken ground wire in the door opening, and/or find the ground and see if it is bad. If the master switch has a hot wire and a good ground wire, replace the master switch.

Apr 25, 2013 | 1987 GMC Jimmy

1 Answer

Jaguar s type 2001 driver window master control not working lights off,but windows work individually on each door


Replace or repair the bad/loose connection on the "Master" switch.
It could be severely difficult, if so take to a reputable Mechanic Shop.

Oct 15, 2012 | Cars & Trucks

2 Answers

Hi, In my Renault master bake light are not working as well tail lights i have checked bulbs wiring and fuses, i have checke brake switch as well, any clue what that may be?


  • When all brake lights fail this is a master brake light switch failure. It needs replaced. Not sure how you check the switch but I can say it needs replaced. Down where the steering wheel bolts to the floorboard, then just barely off to the right is the switch you need to replace.

  • Renault had lots of issues with this and if your car is under warranty then you should heave the dealership replace this for free.

  • See diagram

ironfist109_221.jpg



  • Hope this helps and thank you for using FixYa.
Regards, Tony

Aug 01, 2011 | Renault R5 Cars & Trucks

1 Answer

Windows only work from driver side,which wires go to the window lock switch??


I think what you'll find is the master key pad or drivers pad is defective. If you can open and close all windows from the master switch and no other doors are lit up, try pushing down into the switch on the driver side master for the passenger side window, If you can get the lights to light up try and use the other window and see if you can activate them from the other switches. I priced the masters pad from the dealer it was 186$ so i just slam the driver side switches and push down and i get it until i hit a bump that is. Good luck,

Mar 21, 2010 | 2000 Jeep Cherokee

1 Answer

Break light on dashboard is on constantly and keeps beeping, don't know why it is on!


Check brake fluid level could be low, if not low disconnect brake light switch at master cylinder sit on side of master if light goes off replace that switch if light stay on check parking brake switch at parking brake peddle.

Jan 07, 2010 | 1994 Buick Park Avenue

1 Answer

1996 T-100 dash brake light will not go out


The brake fluid level sensor in the master cylinder is stuck in the lower position which completes the circuit to illuminate the light.. Try tapping lightly on the side of the reservoir to loosen it. If that does not help, you will need to replace the level sensor.
Thanks for choosing FixYa for assistance.

Jan 25, 2009 | 1996 Toyota T100

Not finding what you are looking for?
2005 Chrysler Crossfire Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...