Question about Ford Taurus

Open Question

Torque setting starter motor bolts 2003 Ford Taurus

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
chuck943
  • 783 Answers

SOURCE: torque settings

Torque Specifications Description Nm lb-ft Brake caliper retaining bolts 28 21 Brake hose to brake caliper union 15 11 Brake caliper anchor plate retaining bolts — 2.0L Duratec ST 133 98

Posted on Mar 15, 2009

Ad
  • 14036 Answers

SOURCE: what are the torque specs for head bolts on a

YOU HAVE TO MAKE 2 PASS. ON FIRST PASS TORQUE HEAD BOLTS TO 37 TO 50 FT LBS. ON SECOND PASS TORQUE 62 - 68 FT LBS.

Posted on Sep 07, 2009

tburtk
  • 158 Answers

SOURCE: torque on 3.0 ford taurus head bolts

40 ftlbs then 73 ftlbs then recheck at 73 ftlbs

Posted on Feb 06, 2010

kirkx
  • 2019 Answers

SOURCE: whats the torque specs on a 2001 ford focus 2.0

You need to buy the manual, because you also need to know the order in which to torque them.
http://www.car-stuff.com/mmparts/ford-focus/repair_manual.html
usually you start at the middle and circle outward.
But they can differ. Some cars you always need to put in new head bolts. Others are done in several stages. This is too critical to take chances on.
If you really can't afford $19 for a manual, go to the library and xerox the pages.

Posted on Feb 09, 2010

ebjebs
  • 197 Answers

SOURCE: head bolt settings

1st - step; - 22 ft./lbs. 2nd - step; - 58 ft./lbs. 3rd - step, loosen all bolts completely; 4th - step; - 22 ft./lbs. 5th - step; - 54 ft./lbs.fig074.png

Posted on Feb 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A 93 Ford Taurus Sh 0 Starter problems the end of the starter that goes into the bellhousing had wear and tear on it does that mean it was misaligned or not torqued down correctly also the starter seems to...


if the starter was misaligned it would make terrible noise when cranking the motor. check the flywheel teeth as if its worn can cause wear on the starter, to fix flywheel and starter replacement is required. check the threads in the bell housing and on the bolts if they are worn can cause bolt looseness. try putting locktite blue on the threads when reassembling.

Aug 22, 2014 | Cars & Trucks

1 Answer

Chnage starter 2003


Generally you will need to disconnect the battery ground cable, look near the oil filter and remove wires from the starter. It should be in front of the motor at the bottom in the center extreme front near the radiator but down low in the engine compartment. Remove the bolts holding the starter after wires are disconnected and replace in the same order.

Sep 28, 2010 | 2003 Ford Taurus

1 Answer

I need to replace the existing starter in my 2003 Ford Taurus wagon. I know that I have to jack the car up in order to remove the old starter. What I don't know, is how many bolts need to be removed...


Because of the Variety of mounting methods there are 2 to 4 bolts that should be visible as you look at the starter itself. Not counting the wiring connections. If this a sideways mounted motor with the Starter mounted on the front of the motor there will be 2 bolts holding it in place. If the motor is mounted regularly with the transmission extending under the vehicle the starter in on the rear of the motor near the firewall and will have up to 4 bolts holding it in place but most likely no more than 3. I would recommend getting a Haynes repair manual on the vehicle for more detailed instruction on removal and installation. This manual or a Chilton's manual are both available at the major Auto Parts stores and are fairly inexpensive.

Aug 28, 2010 | 2003 Ford Taurus

1 Answer

Trying to change out motor in a ford taurus 1999 all bolts are out but it will not seperate from transmission


Have you removed the torque converter bolts?If so lift the motor and pry apart

Jun 06, 2010 | 1999 Ford Taurus

1 Answer

Where is the starter located on a 2003 Ford Taurus 3.0 sohc


the starter is bolted to the transmission by the radiator down bottom 2 bolts 2 wires and a plug lay on the ground about midway of the front end of the car and look -up the big round thing with the wires going to it bolted to the transmission it easy you can do it hope this helps

May 04, 2010 | 2003 Ford Taurus

2 Answers

I LOOKED UP THE TORQUE SETTING FOR THR HUB NUT FOR A 1999 FORD TAURUS.IT IS 184/250 ftlbs/NM. CAN YOU EXPLAIN WHAT THE ''NM'' MEANS ? ALSO, WHAT IS THE TORQUE SETTING FOR THE 3 HUB BOLTS?


What "NM" means is Newton Meters; it's the metric measurement equal to the standard measurement. You interpret the torque settings like this 184 ft lbs OR 250 Newton Meters.

The three hub bolts should be tightened to, I believe, 80 ft lbs OR 110 Newton Meters

Oct 23, 2009 | 1999 Ford Taurus

1 Answer

I need to replace the starter solenoid on a 2003 ford taurus


The starter solenoid is attached to the starter unlike the older Fords. You will have to remove the splash guard to gain access to the starter. It is located on the front side of the motor.

Jun 07, 2009 | 2003 Ford Taurus

2 Answers

The engine needs replaced and need to know if the transmission will need to be dropped to do so


no, Because the transmission is underneath your motor. now if you were changing your transmission you would have to pull out the motor then hoist the transmission out.

May 04, 2009 | 1997 Ford Taurus

4 Answers

Torque wrench settings


please understand there are a lot of items on a car that require torque settings every thing from the lug nuts to every engine bolt, and transbolt. please be more specific

Jul 03, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...