Question about Ford Mustang
1997 Mustang GT 4.6. What do these codes mean and how do I fix them
Hope this helps you or future parties of intrest. P1131 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 1 P1151 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 2 I would get under your stang and gently clean outside portion of o2 sensors using a scotch brite. Also if you have so dielectric grease pull electrical connections to o2 sensors clean them and add grease. These trick eliminated the o2 sensor OBD1 codes on my 1987 Ford mustang gt
Posted on Nov 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Based on what the tech manuals say I would change the DPFE sensor for the EGR Valve, careful not to tear the special silicone rubber hoses that go to it from the exhaust, as a Ford dealer tech I saw these codes allot, and the DPFE sensor was almost always the issue or the hoses going to it.
Posted on Oct 16, 2008
Code p1131 manufacturer control fuel air metering, on a 2003 Ford Taurus. Where is part? Is there an easy way to see if it can be fixed without buying the expensive part?
Posted on Sep 01, 2009
Some 2001-2003 F-150, 2004 F-150 Heritage and 2001-2003 E-150/250 vehicles equipped with a 4.2L engine may exhibit the malfunction indicator lamp (MIL) on with diagnostic trouble codes (DTCs) P1131 and/or P1151 (system too lean bank 1 or 2). This condition may be due to leaking isolator bolts/port gaskets in the upper-to-lower intake manifold mounting area. This condition is sometimes intermittent and may not be apparent on a warmed-up engine.
Perform a self test. If DTC P1131 and/or P1151 are the only codes stored in the powertrain control module (PCM) proceed to Step 2. If any additional DTCs are present, follow normal diagnostic procedures found in the PC/ED Manual.
Remove the upper intake and replace only the port gaskets (9H486) and isolator bolt assemblies (9S479). The new isolator bolt assemblies use a rubber material that is green in color, do not install the old isolator bolt assemblies with the black rubber material. Do not replace any other intake parts or gaskets.
While the upper intake manifold is removed, check the exhaust gas recirculation (EGR) orifices that are pressed into each primary port of the lower intake manifold. If any of the orifices are plugged with soot, clean and unplug them with a pick and solvent.
PART NUMBER PART NAME
1L3Z-9H486-AA Port Gasket
3F2Z-9S479-AA Isolator Bolt
Posted on Jan 13, 2010
SOURCE: What does the P1676 code
i don't know about your reader? but a P1676 is a evap vent solenoid control circuit problem. the solenoid could be stuck or the wires/connections could be corroded, open or shorted
Posted on Sep 29, 2010
Its a bab oxygen sensor bank 1 #1sensor the closet one to the front of the vehicle its on the y pipe or header depending if its stright or a v motor
Posted on Nov 17, 2010
Tips for a great answer:
Sep 03, 2015 | Ford Cars & Trucks
Sep 03, 2015 | Ford Cars & Trucks
Feb 23, 2015 | Mercury Cars & Trucks
Oct 01, 2012 | 2007 Ford Focus 1.8
Jun 09, 2011 | Ford Mustang Cars & Trucks
Mar 05, 2011 | Ford Mustang Cars & Trucks
Aug 11, 2010 | 1998 Ford Mustang
Jun 20, 2010 | 1998 Lincoln Navigator
Apr 27, 2009 | Ford Explorer Cars & Trucks
572 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: