Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the manuel says 6 qt thats what it takes. Sometimes 5 min is not enough time for all the oil to run down from the top of the engine check the oil after 1 hour if you removed the same amount that you put in I think you are safe
Posted on Mar 18, 2009
SOURCE: Blowing oil out the dipstick
Check the oil when the engine is cold. Make sure it's at the correct level.
The Positive Crack Valve (PCV) is partial blocked.
This is under $10 item. You should change it.
The location of the PCV is on the top (or near top) of the valve cover.
Replace it and the oil/smoke will reciculate back to the correct path (back to the valve cover).
Posted on Nov 02, 2009
The dipstick can be pulled out of the block with a pair of vicegrips and the new one driven down into the block. Before trying to pull the dipstick tube out make sure it is not held onto the block with a small bolt.
Posted on Jan 20, 2010
Tips for a great answer:
Jan 01, 2017 | Cars & Trucks
May 16, 2015 | 2000 Honda Passport
Mar 14, 2013 | 1998 Oldsmobile Intrigue
May 05, 2011 | 1993 Geo Tracker
May 06, 2010 | 1996 Chevrolet S-10 Pickup
Mar 18, 2009 | 2005 Chevrolet Colorado
99 people viewed this question
Usually answered in minutes!