Question about 2002 Chevrolet Malibu

Open Question

2010 chevy Malibu wipers stopped working - 2002 Chevrolet Malibu

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 78919 Answers

SOURCE: Malibu wipers problems

I suspect a retainer came loose from the arm to the wiper transmission, you will need to get at the wiper transmission and reattach the art to the pivot.

Posted on Sep 12, 2008

Ad
lhjh86
  • 60 Answers

SOURCE: I have a 2005 chevy

THE MOTOR ONLY GET POWER WHEN THE RELAY IS WORKING , IF THE FUSE IS GOOD CHECK THE RELAY YOU MANUAL SHOULD SHOW YOU WHICH ONE IT IS

Posted on Jan 18, 2011

  • 3640 Answers

SOURCE: my 1999 chevy malibu

with the switch on, do you have power at the motor! if there is no power then switch has to be bad. have a good day ! it pretty much has to be the switch. Just buy one from your local auto parts place, and if it doesnt fix it just take it back and get your money back smile.gif . have a good day !!

Posted on Jun 11, 2011

  • 4 Answers

SOURCE: 2000 Chevy Malibu wiper delay and intermittent won't work.

I had this problem (wipers only work on high) with my 2002 Chevy Malibu and had to replace the 6 amp diode (22059733) on the wiper control board. It is connected to the back of the wiper motor and is held on by 3 torx screws.
Radio Shack has them for $2.75 6A, 50V Rectifier Diodes (4-Pack) Model:276-1661

Posted on Aug 15, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 chevy malibu stop lamps always on,even after brake light switch assy was replaced


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Oct 19, 2016 | 2010 Chevrolet Malibu

1 Answer

How to replace third mount break light 2010 Chevy Malibu lt


Remove the rear window package shelf. Disengage the rear window shelf insulator from the rear shelf trim panel in order to get to the high mount stop lamp screws. Disconnect plug.

Oct 14, 2016 | 2010 Chevrolet Malibu

1 Answer

2010 Malibu wiper doesn't work, motor runs


Are you sure the motor it turning and not bound up and humming .
Its a 2010 so the pivets that control the arms shouldn't be worn out .
Their are axess panals on the fire wall that can be removed to serivce the joints .But I would start by unbolting the motor first see what is going with that these parts are all connected with splined shafts held on with clips but their are a lot of moveing parts .
With the motor out if you can move the wiper blade and the other one moves with it the mechisizam works .There for the problem has to be related to the motor or the switch .Wipers also normaly run off a breaker not a fuse so they don't burn out that quickly .

May 01, 2015 | 2010 Chevrolet Chevrolet Malibu LT

1 Answer

Wipers stopped on my 2012 Chevy Malibu.


-Possibly Lock pin or the bolt that hole the wiper arm to the motor
shaft is too lose or strip.

Good Luck

Mai

Feb 11, 2015 | 2012 Chevrolet Malibu

1 Answer

2010 chevy Malibu, starts but dies, over and over. just happened all at once no prior problems?


this just happened to me this morning then the ecs light came on i had to use my son in laws car to go to work my 2010 chevy will not stay running whats wrong i just got this car in feb 2013 Help

Aug 12, 2012 | 2010 Chevrolet Malibu

1 Answer

Windshield wiper failure on 98 Chevy Malibu


Hi, you wont be able to move the wipers manually as they will be locked by the motor. There is only two obvious reasons why the motor should fail again. The new motor was a poor quality replacement or there is an underlying problem on the car like the wiper motor mechanism has excessive play or is stiff/tight and over working the motor causing it to fail. you need to have a proper check over before swapping it again.

Nov 22, 2017 | 1998 Chevrolet Malibu

2 Answers

2000 Chevy Malibu wiper delay and intermittent won't work.


I had this problem (wipers only work on high) with my 2002 Chevy Malibu and had to replace the 6 amp diode (22059733) on the wiper control board. It is connected to the back of the wiper motor and is held on by 3 torx screws.
Radio Shack has them for $2.75 6A, 50V Rectifier Diodes (4-Pack) Model:276-1661

Dec 11, 2008 | 2000 Chevrolet Malibu

1 Answer

Malibu wipers problems


I suspect a retainer came loose from the arm to the wiper transmission, you will need to get at the wiper transmission and reattach the art to the pivot.

Sep 12, 2008 | 1997 Chevrolet Malibu

Not finding what you are looking for?
2002 Chevrolet Malibu Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...