Question about 2001 Nissan Almera Tino

Open Question

Nissan tino wiper motor relay where is it located

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
3dmaster
  • 183 Answers

SOURCE: Nissan Almera Tino Right hand side

YEs but if you are going to do some secrifice on your luck of car model from front,

otherwise its impossible,

you can get this from older car dealer or service center,

TNX

Posted on May 20, 2008

Ad
  • 5 Answers

SOURCE: my 1991 nissan pathfinder's wiper motor repair

The cowl panel has to be removed. You will find plastic clips and possibly a few screws holding the panel on. Once you remove the panel you will see the wiper linkage and motor.

Contact us at www.nissanpartsnow.com and we can e-mail an image to you. Thanks

Posted on Jan 21, 2010

  • 111 Answers

SOURCE: how do i get service

Hi there.I think i can help u to turn off service alert, Its done in the following way:-
1.Switch ignition on ( do not start engine )
2.Switch radio ON.
3.Start engine.
4.Switch radio OFF.
5.Press and hold INFO button.
6.Turn volume control knob at least 30 clicks until self dianostic menu is displayed and an audible
signal is heard. ( while still holding the INFO button )
8.Using the circular dial ( Joystick ) select Confirmation/Adjustment and press centre of joystick
to ENTER.
9.Select Service and press ENTER.
10.Select Reset and press ENTER
11Press BACK button to return to main menu.
12.Switch OFF ignition
This should do the job, sorry it`s so long winded
Good luck John ( South Wales UK)

Posted on Aug 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the wiper motor relay on a nissan qashqai located and what one is it


Look under hood for fuse box.
Relay position should be shown on inside of fusebox cover

Dec 31, 2017 | Nissan Cars & Trucks

1 Answer

Where is the fuse for rear wiper on a 2010 nissan note


Under the dash or under the hood. Probably is a relay also.

Nov 02, 2017 | Nissan Cars & Trucks

1 Answer

Have a 1997 nissan xe pickup trying to find out where the relay is located for the windshield wipers


Sorry, my wiring diagram doesn't show a relay. The washer motor and wiper motor use the same fuse in fuse block, fuse seven--20 amp. Of course if the washer motor works ok, the fuse isn't the problem.
The wiper switch is part of ground circuit for motor, if that helps you any.

Mar 11, 2016 | Nissan Cars & Trucks

1 Answer

Location of nissan almera tino crankshaft sensor


if you are under the car it should be on the firewall side. It is black piece or a light grey color.

Jan 08, 2016 | Nissan Cars & Trucks

1 Answer

My windshield wipers stop working and I'm trying to find the fuse in a 2005 nissan morano


There are two fuses in the intelligent power distribution module located in the engine room: 15A FUSE 78 and 20A FUSE 73. Wiper failure also could be caused by the CPU, the front wiper relay, the front wiper high relay, or the front wiper motor.

Jan 27, 2015 | 2005 Nissan Murano

2 Answers

WHERE IS THE WIPER RELAY LOCATED ON 2003 NISSAN ALMERA TINO


I recently tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master.
It would'nt move forward or reverse, engine was good both solenoids for forward and reverse worked, but still couldn't diagnose the problem.

I don't have much technical knowledge but I just followed it step-wise, and now it works perfect! covers wiring, codes, diagrams, torque specs, PCV, everything
got it from www.reliable-store.com

Oct 28, 2013 | Nissan Cars & Trucks

1 Answer

THE AUTO DOOR LOCK AND POWER WINDOW DO NOT WORK AND I CANT FIND THE FUSE FOR THEM ON 2005 NISSAN ALTIMA


From the service manual, which is available relatively inexpensive at Promanuals.net here

 Both front wiper relays are located in the IPDM E/R (intelligent power distribution module engine room)
 Wiper switch (combination switch) is composed of a combination of 5 output terminals and 5 input terminals.
Terminal combination status is read by BCM (body control module)
 BCM controls front wiper LO, HI, and INT (intermittent) operation
 IPDM E/R operates the wiper motor according to CAN communication signals from the BCM.
Power is supplied at all times
 through 50A fusible link (letter f , located in the fuse and fusible link box)
 to BCM terminal 70, and
 through 20A fuse (No. 39, located in the IPDM E/R)
 to front wiper relay, located in the IPDM E/R
With the ignition switch in ON or START position, power is supplied at all times
 through 10A fuse [No. 1, located in the fuse block (J/B)]

Sep 28, 2009 | 2005 Nissan Altima

1 Answer

1996 nissan sentra windsheild wipers not working


This is the relay switch and its located inside the dash board. the part itsefl will cost 40.00

Mar 10, 2009 | 1996 Nissan Sentra

Not finding what you are looking for?
2001 Nissan Almera Tino Logo

Related Topics:

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...