Question about Cars & Trucks
Day and night lights don't work only high beam working what could be the reason?
I see two problems that are pretty common either fuse is blown or your headlight switch has failed.
Posted on Oct 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I got my daughter a 2003 Pontiac Sunfire. They are a lot of electrical work.
The problem is the wiring harness which splits and travels under the battery and the windshield washer reservoir. The wires oxidize and fall apart.
The low beams will work but if you turn on the high beams the lights will go completely out, right?
If this is the case I can pretty much guarantee that you will have to remove the battery, the drivers side front inner fender, the air filter housing, the air throat, and the windshield washer reservoir. You will then be able to open the wiring harness feeding the headlights. The wire that feeds your high beams is a pink wire. Test the wires from the harness plug (located just under the battery) to a point as close to the headlight as you can, Use a simple continuity tester. Also feel and bend the wires. If the insulation cracks and you see a green or lite blue powder then patch a new wire in.
All in all I found 4-wires which I replaced. Everything works now.
Posted on Jun 15, 2009
Need to have an electrical shop determine what is wrong.
It could be a fuse for the low beam headlamps that has blown,
or a relay has been overheated.
Check that the bulbs for the low beam aren't blown out, possibly
Posted on Jul 08, 2010
The problem is likely your multi purpose signal light switch. If you take the lever and move it from hi to low beam will the low beams come on? It is common for this multi purpose (real expensive ) switch to fail after a period of time! The steering wheel may have to be removed, to change it. The air bags will also need to be disabled so as not to active them while removing the switch.
Posted on Mar 19, 2011
Tips for a great answer:
Jul 05, 2015 | 2001 GMC Jimmy
Jun 29, 2012 | 2003 GMC Envoy
Apr 30, 2012 | Chevrolet C2500 Cars & Trucks
Dec 11, 2011 | 2004 GMC Envoy
Sep 05, 2011 | GMC K1500 Cars & Trucks
Sep 01, 2011 | 2004 Kia Sorento
Jul 08, 2010 | 2004 GMC Envoy
Oct 24, 2009 | 2000 GMC Sonoma Extended Cab
Mar 01, 2009 | 1997 Cadillac DeVille
21 people viewed this question
Usually answered in minutes!