Question about Cars & Trucks

Open Question

CHANGE REAR NISSAN NP200 BEARING - Cars & Trucks

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 35 Answers

SOURCE: how do you change rear wheel bearing on a 2004 nissan sentra

Yes it is as easy as it looks. If you had the tire off and figured out that it looks easy, you shouldn't have much problem.

Posted on Mar 21, 2009

gh20s
  • 343 Answers

SOURCE: Change rear bearing on a 2001 Nissan Sentra

Most newer cars have a bearing that is pressed in to the hub. In order to do the repair you should have to replace the entire hub. This is actually easier and cleaner because the bearings are lubed, sealed and pressed in the hub. They usually cost around $30 and should be available through your local parts store. In most cases the hub is held on by a large nut so I recommend that you make sure you have a socket that is large enough.

Posted on May 13, 2010

pal03246
  • 713 Answers

SOURCE: Np200

if the engine light doesn't light up, when the key is turned on to accessories position, along with other lights, that means that the cars computer is not turned on, powered up. that's why its not starting. the car is not seeing the computer. could be blown fuse, ground side for computer is broken, could be harness issue and it could be the computer itself. start with checking fuses first. check all of them. you may find one burned.

Posted on Jul 01, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change cambelt on nissan np200 - Nissan Cars


too complicated to explain here so get a workshop manual and the procedure and photos are in the publication

Jul 20, 2017 | Nissan Cars & Trucks

1 Answer

Nissan NP200 started jerking whilst driving and cutting out completely and not wanting to start. If you wait a while, it starts as normal, but does the same thing a few kms later.


#1 if your engine light is on, you need to go to autozone and have it scanned. if you get code po420 or po430, your cat. converter is bad. If this is the code also should change spark plugs. Misfire causes cat. converter to melt inside.

Mar 09, 2015 | Nissan Pickup Cars & Trucks

1 Answer

Were do I find fuel filter on Nissan np 200


Have you tried following the fuel lines, that should lead right to it.

Nov 04, 2014 | Nissan 200 Cars & Trucks

1 Answer

Nissan Np200 1.6 8 valve Cam belt Timing settings


need the torque setting for head gasket replacement. nissan np200 1.6 8 valve

Jul 31, 2014 | Cars & Trucks

1 Answer

Where are fuse boxes & relays located


no YEAR no joy./
sorry.
open glove box, see that operators guide, , its in there.
if lost they sell them or for free at dealer, ask em.

the car with a zillion names

It has also been marketed as the Renault Logan, Nissan Aprio, Mahindra Verito, Renault Tondar 90, Lada Largus (the MCV), Nissan NP200 (the pick-up) or Renault Symbol (the second generation), depending on the existing presence or positioning of the Renault brand.

no country stated, so no joy 2.
so go to YOUR dealer in Your country and get the operators guide.
it is there under , how to change fuses chapter.
in 99% of all cars. made.

some cars have 1 box others have 4.
the FSM book shows the full schematics of the car, and all fuse loads.
and is 1000x better. sold at SAME PLACE.

Jul 14, 2014 | Nissan Pickup Cars & Trucks

1 Answer

Replace a serpentine belt on a Nissan NP200


Nissan NP200 Using a short socket of appropriate metric value, and a pry bar; Push the pry bar toward the firewall to loosen the tension on the belt. It's not that hard once you buck the initial spiral spring pressure of the tensionor. I have even pryed against the tensionor with a blunt heavy bar and moved it enough to free a Belt.

Oct 03, 2013 | Nissan Cars & Trucks

1 Answer

How to change cambelt on nissan np200


Nissan or a 93 metro? very confusing this post.

May 18, 2013 | Nissan Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...