Question about 1999 Chevrolet Blazer

1 Answer

Need to find a inner axle for my 97 blazer any ideas

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try a junk yard

Posted on Oct 22, 2013

Testimonial: "tried nobody has a 97 blazer anywhere and I don't know if any one will work like a 96 or a 98"


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Pulling a cv axle from a 97 toyota rav4

mark the relationship of the inner cv joint to the a large screw driver between wheel studs hold driveaxle and remove the inner cv joint to axleshaft flange nuts remove the freewheel hub remove the driveaxle snap ring and spacer pull the inner cv joint off the axleshaft flange studs lower the inner cv joint and pull the driveaxle assembly out of the steering knuckle.let me know if this helps.

Jan 24, 2012 | Toyota RAV4 Cars & Trucks

1 Answer

Differential bearing on the front how to I take it

What part do you want to take out? if it's the pinion bearing you have to remove the driveline remove the pinion nut pull the yoke off pull axles out and remove bolts to get to the inner bearings and the 3rd member bearing cap 2 bolts on each side.

May 28, 2010 | 1998 Chevrolet Blazer

1 Answer

Pontiac GTP Transaxle

Yes it is held in with a circlip. Just pry the axle out. Don't pull on it. You will pull the inner joint apart. Put a screwdriver or prybar between the inner joint and the transaxle.

May 01, 2010 | 1997 Pontiac Grand Prix

1 Answer

98 Blazer 4WD front axel falling out of differential

I would dismantle the axle, fit new thrust bearings and anything else that is worn/damaged and reassemble/adjust clearance gaps to it, according to the service manual.

Mar 12, 2017 | 1998 Chevrolet Blazer

1 Answer

Front diff growl in 2wd

This would be a failing bearing in the differential. More specificly, I would suspect the pinion bearing. The differential will need to be disassembled and all (4) bearings and bearing races inspected for wear/ pitting.

Mar 24, 2010 | 1997 Chevrolet Blazer

1 Answer

97 s10 blazer.. need to fill rear with gear oil. where is plug?

most axles fill plugs are located on the rear cover just fill until it starts coming out and your done. on some axles there will be a plug on the axle itself located on the fron side of the housing close to the driveline

Mar 05, 2010 | 1997 Chevrolet Blazer

1 Answer

How to repair inner cv join

Obviously ly will require diassembly. The cv joint is replaced as an axle unit and will require special tools Most shops don't consider it a big job and is relatively inexpensive. Replacement is a rebuilt axle assembly.

May 21, 2009 | 1992 Chevrolet S-10 Blazer

1 Answer

94 Silverado, not correctly disengaging 4hi

either there is a vacuum leak from the transfer switch to the front axle actuator on the inner fender well--down a cable into the front axle --most likely it got stuck and it's front axle is LOCKED in
? in 2 high is the front axle indicator light on then ---my solution is good ---if not ? did the indicator lights work in 4 hi / 4low ---when you put it back in 2 high the lights should all be off
if it's acting that way and the lights don't work ---I don't know right this minute to tell you --sorry

I despise GM --and Ford ---will no longer them ---nothing nada ever
I have a Blazer ---my opinion completely faulty from the factory --everything
97 Ford Taurus SHO yamaha aluminum racing 3.4V8---no dealer --27 straight is "not allowed by ford" to change the oil even ---But Lexus will I find that silly -but kudos to lexus --Thanx

2 toyota MR2's
just traded off my 74cj5 jeep
and my 62 international mostly restored pick up --was STOLEN

I'm going with Toyota --can't afford a BMW

Apr 06, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

How do I get the drive axle out of its transmission housing?

Yes ,it should just pop off.Have someone pull a little on it while you tap on the axle.There is an inside shaft that the outer shaft slides onto and there is a c-clip holding the two together. Sometimes the inner shaft pulls out with the outer axle if the clip doesnot release.If this happens you'll have to be carefull putting the inner shaft back in,because there is a washer at the end that may fall down and the axle willnot go back in.There is a pilot bearing at the end inside that the tip of the inner axle goes into and just before it is where the washer is.

Mar 04, 2009 | 2000 Chevrolet Blazer

1 Answer

Removing axle from transmission 97 acura 3.2 tl

Hi,welcome to fix ya. i use a long screwdriver and place it between the inner joint and the sub shaft housing and push the axle out of the holder . be sure to pay attention to the marking on the housing that goes on the oil pan to be sure it is not upside down or it will crack when you tighten it.

Nov 10, 2008 | 1997 Acura TL Series

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides