Question about Chevrolet 1500
You dropped the pan to change the filter? Was there a lot of gunk in the pan? If it has over 100,000 miles on it, it is time for a rebuild.
Posted on Oct 21, 2013
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: transmission wont shift
check the kickdown/throttle valve cable. It may be bound up and stuck in the maximum position giving you extremely late shifts.
There ISN"T any modulators or vac lines on any Chrysler automatics
Posted on Apr 03, 2009
The EMC detected and problem so it's in limp mode, As long as it's in limp mode the 4th and OD will not activate. Take care not to burn up the transmission by running it hard while your in the limp mode.
Your going to have to get the truck scanned to clear any codes and why there are DTC codes. Auto Zone scan for free and most auto shops charge $10.00 to $20.00 to scan sine they want the business.
If you want to clear the codes your self you can put the ignition to the run position and pull the ECM (Batt) fuse out for 20 sec and place it back in then start the truck. It may stall but let it, just start it again and this would have cleared all the DTC code history.
The transmission should be running fine unless there is a problem and the service engine light will be on again and you'll be in limp mode still with an updated DTC in the ECM.
Good luck and hope this helps.
Posted on May 26, 2009
Tips for a great answer:
Feb 23, 2014 | 1997 Chevrolet Blazer
Feb 19, 2014 | 2001 Chevrolet Blazer
Dec 10, 2013 | 2006 Mercury Milan
Mar 16, 2011 | Ford F-250 Cars & Trucks
Oct 31, 2009 | 1994 Chevrolet S-10 Blazer
Feb 06, 2009 | 1995 Chevrolet Blazer
Oct 31, 2008 | 1987 Toyota MR2
Feb 18, 2018 | Chevrolet Silverado Cars & Trucks
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: