Question about Cars & Trucks

Open Question

Can tension the chain on the vacuum pump on my nissan almera 2.2 diesel the year of it is 2004

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced my timing chain nd tentioner on my Nissan almera 1600 16valve 2001model but the car overheat quickly


  • I would pull the timing covers and recheck the marks and make sure they are exactly where their supposed to be. Some times the tensioner needs extra help to get the marks in place. Pry on it. If they are good. Replace the thermostat. Just a note.. I replace everything in the timing area, except gears, unless the are broken. All pulleys, belts/chains, guides, and water pump, if it is in there.

Dec 18, 2014 | Cars & Trucks

2 Answers

Nissan Almera wont start with code P0345


Why would anyone replace those parts?

I guess the car was never tested to find any problems

No more to say

Common sense-- tells you that not all those
parts failed at one time or any at all

Dec 03, 2014 | 2005 Nissan Almera 1.5

1 Answer

Nissan diesel


Replace it.

Oct 21, 2013 | Cars & Trucks

1 Answer

I have a nissan almera 2001 1500 what model


hi i am not 100% sure but i think it is the P11 144 gearbox its used with the almera qg15de engine. i think it is also used in a primera and almera tino of the same years.

Jan 24, 2010 | 2004 Nissan Titan

4 Answers

I have a Nissan Almera diesel 2,2 liter engine, year 2000. It stopped running just like that, without any pre-announcement. I could not start it (It swings but the engine does not start). The launch X431...


Solution #1 is not correct.. reason, why engine does not start when those codes are shown, is pump control unit (PCU), or electromagnetic valve. You should give PCU to fix (mostly it's broken transistor inside) or to change you current PCU to the new (need to be programed) or buy whole new VP44 PSG5 pump.
Sorry for my broken language :)

Nov 12, 2008 | 1994 Mercedes-Benz C-Class

1 Answer

Serpentine belt diagram for a 5.9 diesel with air and 9 pulleys


5.9L DIESEL
196759.jpg The 5.9L diesel engine accessory drive system (with a/c) consists of :
  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
  8. A/C Compressor Pump Pulley (8)
CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. Refer to or for correct engine belt routing. The correct belt with correct length must be used.
1. Position drive belt over all pulleys except water pump pulley. 2. Attach a 1/2 inch ratchet to tensioner.


196757.jpg The 5.9L diesel engine accessory drive system (without a/c) consists of :
  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
3. Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.

Sep 13, 2008 | 2008 Dodge Ram 3500

1 Answer

How to change water pump nissan maxima 1995


Well, waterpump on your car is internal inside the timing chain area, being driven by the timing chain. You need to remove drive belts, the small black side covers, that are screwed into the front engine cover. The left on has the chain tensioner, the right one has the water pump behind it. Once the covers are removed, you need to push the timing chain tensioner inside and put a pin inside of it (tensioner ) to hold it in. Once you have done that, you need to rotate the engine counterclockwise (until you feel tension) to loosen the chain around the water pump. Then you will use 2 bolts (6mm and about 2 inches long) and screw those into the water pump body. This will pull the pump out of the engine, so pretty much the bolts are going to be acting as puller device to remove pump out of engine. reverse install procedure. This is not the easiest of repairs and not for a novice or someone, that doesn't really work on cars. Good luck.

Jul 26, 2008 | 2003 Nissan Maxima

5 Answers

2004 nissan maxima


I have the same issue with my 2004 maxima.The service techs said it was the timing chain tensioners .Since they are hydaulic and they powered by the oil in the car .It is recommended to purge the the engine every time the noise starts to come back. I brought some an it really freaking work because I started to run it into a tree and go buy a toyota

Jun 18, 2008 | 2004 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...