Question about Cars & Trucks
What kind of antifreeze is OEM in a 1999 GMC Jimmy?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i would hardly call this repair simple or inexpensive. the part itself yes the labor probably not. i have made this repair myself to my 97 jimmy if you have 4 wheel drive the transfer case up front makes this repair next to impossible from the underside of the car plus the fact that it is behind the motor mount means the the mount must be removed. this involves raising or removing the motor. simple? on a car of this age you will probably find (as i did) the motor mounts are damaged might as well replace them too the parts are fairly inexpensive. also look into replacing all the plugs so you dont have to do this again in a few years. oh yea use the proper antifreeze mix in your radiator water is what rusts out the plugs
Posted on Nov 17, 2008
SOURCE: 95 gmc jimmy engine codes
9141 does not exist I will assume it is DTC P0141 HO2S Heater Performance Bank 1 Sensor 2
The VCM has the capability to monitor this process by using the Heated Oxygen Sensor (HO2S Bank 1, Sensor 2). The HO2S (Bank 1, Sensor 2), located in the exhaust stream before the catalytic converter, produces an output signal which indicates the storage capacity of the catalyst; this in turn indicates the catalysts ability to convert the exhaust emissions effectively. If the catalyst is functioning properly, the HO2S signal will be far less active than the signal produced by the Heated Oxygen Sensor (Bank 1, Sensor 1).
When the HO2S temperature measures below 360°C (600°F), the sensor will not produce any voltage and will behave like an open circuit. This will result in an Open Loop operation.
The HO2S heater provides for a faster sensor warm-up which allows the sensor to become active in a shorter period of time and remain active during long extended idle. The DTC P0141 determines if the HO2S is functioning properly by checking the response time of the sensor. This DTC is a type B DTC.
Posted on Dec 06, 2008
Disconnect the heater hoses from the water pump and the intake manifold. Get a compressor and blow out the hose (put the air hose into the the hose that came off the mainfold. then flush the system and replace the antifreeze.
Posted on Dec 12, 2008
look under the front of your blazer, just below the bumper, and you will see a little access door in the plastic guard. Open this door, and you will find your oil filter.
Posted on Dec 01, 2009
Tips for a great answer:
Oct 11, 2012 | 1998 GMC Jimmy
Jan 22, 2010 | 1999 GMC Jimmy
Oct 19, 2009 | 1999 GMC Jimmy
May 24, 2009 | 1999 GMC Jimmy
Apr 03, 2009 | 1999 GMC Jimmy
Nov 17, 2008 | 1999 GMC Jimmy
68 people viewed this question
Usually answered in minutes!