Question about Cars & Trucks
There should be 2 buttons. 1 is to set the time and the other is to change options. Sometimes they work through the stereo system. It depends on the type. Good luck or maybe try and locate an owners handbook
Posted on Dec 30, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Fiat Punto indicators
you need to change the flasher unit .... also check fuse # 24 on the fuse panel inside the vehicle. the flasher unit should be just under the dash on the steering wheel side... i have alot of information on that vehicle but i couldn't find where exactly the flasher unit is located.
Posted on Feb 17, 2009
SOURCE: fiat punto acceleration problems
I had a similar problem with a 98 sporting. It turned out to be firstly the clutch had worn down to almost nothing and the fuel filter hadn't been changed in a good while so it got clogged. I would do the filter first. (located just under the drivers side near the rear wheel.
Posted on Apr 27, 2009
they are located at the back ov the engive they have lick black rubber pipes attached to them u have to pull them off then u will see the plugs thare will be 4 in a line u will need a spark plug socket set just turn them they will come out.
Posted on May 27, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
<grin> I don't know why or how this ended up under the category of Fiat 2006 X1/9 - I'd like to have one but I think I will have to be satisfied with my '87 Bertone instead-
I would highly recommend you have a shop replace the sensor (very soon!) with a pressure gauge to measure the pressure directly to make certain you aren't dealing with a failed or obstructed oil pump. This will only take a few minutes and shouldn't cost much. If your engine isn't clattering, I suspect the replacement sensor isn't any good either.
Posted on Oct 24, 2009
Tips for a great answer:
Nov 07, 2017 | Fiat Cars & Trucks
May 09, 2016 | 2002 Fiat Punto
May 27, 2015 | Fiat Siena Cars & Trucks
Dec 27, 2013 | 2002 Fiat Punto
Dec 10, 2013 | Fiat Cars & Trucks
Feb 11, 2012 | 2002 Fiat Punto
Apr 17, 2011 | Fiat 124 Cars & Trucks
Mar 30, 2011 | Fiat 500 Cars & Trucks
68 people viewed this question
Usually answered in minutes!