Question about 2011 Subaru Outback

Open Question

Replace headlight bulb on 2011 subaru outback

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2005 Subaru Outback XT - Real Tail light- bulb replacement

1. Open the rear hatch, and look down towards the bumper, in the direction of the tail light bulb needing replacement.
2. You should see the dark colored plastic trim piece, which is held in place by two small plastic body style philips head screws.
3. These wil only 'loosen' a little bit, you will need to slip a fingernail or some other slim item, underneath the heads of each of the screws, and pull back on them firmly by grasping the body of the screw, not the head (which is flimsy, and can crush if squeezed).
3. remove the plastic trim piece - it can be achieved by lifting out and towards you - set aside.
4. Using a 10mm socket or wrench, unscrew the upper and lower bolts holding the taillight assembly in place.
5. the taillight assembly is now loose - it can pulled rearwards, and will slide off of the small guide slots holding it in place.
6. The bulb is a twist lock style, underneath the tan cap- twist the cap counter-clockwise, and it will pop out. The bulb is a number 7440, for the running light/ brake light, and a 7443 for the turn signal. a 3757 will not fit through the cut out hole in the taillight assembly.
7. Re-assemble in reverse, making sure to check the function of the bulb PRIOR to re-assembly.
Good Luck.

Posted on Jan 03, 2009

michigan man
  • 3533 Answers

SOURCE: Replacing a/c hoses in Subaru Outback 2004

give this website a try its about A/C-repair www.directgardening.com

Posted on May 20, 2009

  • 25 Answers

SOURCE: 2005 subaru outback cabin air filter install

Yes the o5 outback has a cabin air filter and it is located behind the glove box. You have to remove the glove box, once you get it out of the way you will need to remove the 4 metal clips that hold it in place and make sure you put the filters in with the arrows pointing in the right direction for air flow. Other wise you will have restriction through the vents

Posted on Jun 26, 2009

subytech1
  • 244 Answers

SOURCE: Power steering pump replacement for Subaru Outback

REMOVAL

  1. Remove ground terminal from battery.
  2. Remove pulley belt cover bracket.



  1. Loosen lock bolt and slider bolt and remove power steering pump drive V-belt.
  2. Disconnect connector from power steering pump switch.



  1. Disconnect pipe C and suction hose from oil pump. CAUTION:
    • Do not allow fluid from the hose end to come into contact with pulley belt.
    • To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.



  1. Remove bolts which install power steering pump bracket.



  1. Place oil pump bracket in a vise, remove two bolts from the front side of oil pump. CAUTION: Do not place oil pump bracket directly in the vise; use soft pads and hold oil pump lightly to protect the pump.



  1. Remove socket from oil pump.
  2. Remove bolt from the rear side of oil pump.

Posted on Aug 09, 2009

  • 507 Answers

SOURCE: how do you change a low beam headlight bulb on an

get in behind headlight under hood and look for a central plug or screw for the headlight to remove to get to the bulb you will have to unplug the wiring to pull it out and a spring clip youll have to press in towards the centre of the globe to remove it

Posted on Nov 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Headlights won' turn on on a 2006 subaru outback marker lights work


2006 Subaru Liberty 3.0 Blitzen, 52,000kms. It's unbelievable, both my low beams went out at once and when I checked it was both the globes had gone at once. Never has this happened on any other vehicle before, I've ordered a HID conversion kit over the net, hope that works well.

Oct 03, 2012 | 2006 Subaru Outback

1 Answer

Headlight has burned out and needs to be bought and replaced


The bulb is only about $8, and is not hard to replace.
You just turn the retaining ring enough for it to come off on the back side of the lamp, and then the bulb pulls right out.
It is only the lens that is expensive.

http://www.drivewire.com/vehicle/subaru-outback/headlight-bulbs/

Nov 18, 2010 | 2005 Subaru Outback

1 Answer

Looking for the headlight bulb for my 2005 subaru


It is only about $8 for the bulb, as long as you have not broken the lens. That costs a lot more.

http://www.drivewire.com/vehicle/subaru-outback/headlight-bulbs/

Nov 18, 2010 | 2005 Subaru Outback

1 Answer

The passenger side headlight (low beam) needs replacing. It is a special edition 2000 Subaru Outback and I don't know if I just need a halogen bulb or the whole lamp.


It is Just a bulb. Open bonnet next to the radiator on each respective side is the wires to your headlight bulb. Very straight forward and easy to remove and replace. Good luck and have a great day.

Feb 04, 2010 | 2000 Subaru Outback

1 Answer

How do you change a low beam headlight bulb on an 03 subaru outback wagon?


get in behind headlight under hood and look for a central plug or screw for the headlight to remove to get to the bulb you will have to unplug the wiring to pull it out and a spring clip youll have to press in towards the centre of the globe to remove it

Oct 25, 2009 | 2003 Subaru Outback

1 Answer

Need to replace a headlight assembly for a 2006 Subaru Outback.


No, you just remove the radiator grill and the side marker light and the headlight housing bolts and it comes out. Not a real hard job and is Real straight forward. Good luck and have a good day.

Mar 27, 2009 | 2006 Subaru Outback

3 Answers

Low beam headlight is out, doesn't look like a fuse


Check the Headlight Switch. If your headlights come on automatically check the headlight sensor and its associated relay.

Mar 26, 2009 | 2000 Subaru Outback

1 Answer

2007 subaru outback headlight problem


Each head lamp also has it's own relay, you can rule the relay out by swapping the left head light relay with the right head light relay & see if the problem moves to the other side...The relays are also in the same under hood fuse box.

Sep 25, 2008 | 2007 Subaru Impreza Outback Sport Wagon

Not finding what you are looking for?
2011 Subaru Outback Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...