Question about 2005 Toyota Sienna LE

1 Answer

Driver side tail light needs replacing, how do I get to the socket??

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 56 Answers

Usually there is a pannel on the inside of the vehicle the snaps into place or may have a screw or two holding it on. Simply remove the pannel on the side you are working on and you should be able to then turn the bulb holder and get to the bulb

Posted on Oct 21, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Zeevert
  • 373 Answers

SOURCE: bulb has been replaced...tail light

It sounds like a ground wire problem. Try to trace the ground wire from the passenger side. Look for a broken wire or a corroded ground connection.

Posted on Jun 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2011 Ford Escape driver side tail light not working correctly - lights are on but turn signal flash not working and neither is the brighter brake light


I would guess that you need a new bulb. Many of these tail lights actually have two filaments inside them, one that is used for a dimmer light (running light) and one that is used for a brighter light like (brake light, turn signal). The easiest thing to try (and probably the cheapest) would be to buy a replacement bulb and change it. Most places that sell automotive light bulbs will have a large catalog where you look up the make model and year of the car you need a light for and it will tell you which replacement bulb you will need. Then look in your cars manual to see how you access and replace the bulb.

Jan 30, 2015 | 2011 Ford Escape

2 Answers

2006 Jeep Commander Tail light


The tail light circuit is separate from the brake and turn signal circuit. Either the bulb socket has gone bad or a wire has flaked out. Check for voltage at the socket on either pin base when you have your parking lights on. If voltage is present, it is either a worn socket failing to hold the bulb properly, or another bad bulb. If no voltage, determine which wire on the other side is tail light power, and run a new wire across to the side that isn't working and connect it to provide power.

Apr 09, 2014 | 2006 Jeep Commander

1 Answer

How to replace brake light bulb


  1. Open the back hatch of your Honda Pilot and look for two small screws. They will be right behind the tail light. Remove the two screws, using a standard screw driver. You should now be able to pull the tail light box away from the car a few inches to allow access to the sides of the tail light box

  2. Remove the two ball sockets found on both sides of the tail light box. At this point you should be able to move the entire assembly enough to get at the tail light. Inside the tail light you will find three bulb sockets. Remove all three bulbs by turning the sockets to the left.

  3. Then replace each break light bulb by screwing them clockwise into the sockets. Then, reassemble the tail light box in reverse order.
Hope this is a help PLEASE RATE MY HELP

Nov 28, 2010 | 2009 Honda Pilot

1 Answer

How do i remove my tail light


Hello,

Follow this steps below,

Tools:
  • 8 mm Socket with Extention
  • Flat-Head Screw Driver
  • Piece of Cloth
Step 1:
Open the Tail Gate and you will see two tabs on the inner side of the tail light.
{mosimage}
Step 2:
Using a Flat Head screw driver, pry open the two tabs. This will expose the 8mm bolts that are holding the tail light.
{mosimage}
Step 3:
Using a 8mm socket unbolt the two. Using a flat head screw driver, pry the tail light out. Make sure you use a piece of cloth so you do not damage the paint on the side.
{mosimage}
Step 4:
If you are using this process to change light bulbs, then you can just go ahead and swap the bulbs. Otherwise you can just take the tail light out by removing the harness.

Take care.

Jul 24, 2010 | 2002 Subaru Legacy

1 Answer

Drivers side tail light


Remove the tail light, then the grey bar with all the lights by removing the two screws at the top and bottom. play with the light socket that dosen't work and chances are that it is cracked and broken. If it is broken then the contacts within are not making contacts becuase the black plastic socket is used to hold the contacts together. If you are handy, you can tear open the grey bar and solder the contacts together, then epoxy the bar back together. Or, find, purchase and replace the grey light socket bar.

Oct 26, 2009 | 2002 Chevrolet TrailBlazer

2 Answers

2002 Toyota highlander passenger brake light not working


RE: 2002 Toyota Highlander 2.4cyl. 4X4 Base Model

I am a Certified Technician and have basic knowledge with electronics in electrical wiring. I searched the web and discovered this is a common problem.

I fixed the problem and it was a simple procedure... The problem is with the reverse light socket at the side with no brake light. This socket functions as a hub to direct current to the brake bulbs.

Remove reverse light socket and re-seat bulb. Check for loose or broken prongs. Replace if necessary.

Swap the reverse socket with the other side.

Oct 06, 2009 | 2002 Toyota Highlander

1 Answer

2002 Ford Taurus Driver Side tail light bulb replacement


open the trunk.
pull back the cover on the side you need to change, there are usually 3 black plastic nut you have to remove before doing this.
after the trunk interior cover is pulled off there are 3 nuts, 11mm wrench or socket will take them off. pull the taillight assembly out and twist the socket out containing the bulb that is blown. the bulb just pulls out of the socket. while the bulb is out you should inspect the socket for corrosion, it wont hurt to clean it up and put some die electric grease in there

May 17, 2009 | 2002 Ford Taurus

1 Answer

Tail light doesn't work


Could be anything from corrosion in the socket to a broken wire some where.
Remove the bulb and look into the socket at the bottom, are the socket terminals clean?
Next, turn on the park lights and prob the terminals in the socket to see if there is voltage there.
Let me know and we can move on from there.

Also, is there a trailer hitch on the vehicle with a trailer light pig tail?

Good luck and let me know.
Regards,

Mar 09, 2009 | 1986 Chevrolet S-10 Blazer

1 Answer

Replace driver side tail light on 2004 cadillac deville


Hi,from inside the trunk, in some models just need to remove the carpeted cover and you will see the sockets ,in others you need to remove the complete tail lamp but is not hard ,just a few screws and it wil come off......C1

Nov 21, 2008 | 2004 Cadillac Deville

Not finding what you are looking for?
2005 Toyota Sienna LE Logo

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...