Question about 2006 Ford Fusion

Open Question

The carwould start and run for a while and quit, now it wont start. got a pending code PO61D and said internal module mass air flow performance does anyone know the problem

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 92 ford ranger

check your vacuum lines if one is off then it will do that too.

Posted on Jun 29, 2008

tripletauto
  • 1450 Answers

SOURCE: Mass Air Flow Sensor, oxygen sensor and coil plugs

look for vacuum leaks the last 4 codes are lean codes
primarily lookm at the pcv hose noturious for collapsing

Posted on Sep 16, 2008

Molson02536
  • 3854 Answers

SOURCE: check engine light

It might but what exactly are the codes. Before you change the Mass air flow sensor, try cleaning it first with a can of mass flow cleaner.
If your running a oil K&N filter, there could be some oil residue on the sensor. Start with that and change the filter or clean it if it's a K&N.
The O2 sensor's could be bad also, you really need the code's to be sure what sensor is giving you the faulty signal.
Good luck and hope this helps.

Posted on May 05, 2009

  • 147 Answers

SOURCE: Repalced O2 sensors, mass air flow sensor, and plugs error messag

dpfe velve

small emissions valve with one electrical connnector and three to four vacume lines located near your egr valve. this is a comon fault on fords emmissions system.

Posted on Aug 15, 2009

blueextc3221
  • 15935 Answers

SOURCE: location of mass air flow sensor

The sensor is mounted on the throttle body between the air cleaner assembly and the air cleaner outlet tube.

4641370.jpg
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What is the meaning of Code P0102?


Code p0102 is for Mass Air Flow Sensor. What it is read this:-
A mass (air) flow sensor (MAF) is used to find out the mass flowrate of air entering a fuel-injected internal combustion engine.
The air mass information is necessary for the engine control unit (ECU) to balance and deliver the correct fuel mass to the engine. Air changes its density as it expands and contracts with temperature and pressure. In automotive applications, air density varies with the ambient temperature, altitude and the use of forced induction, which means that mass flow sensors are more appropriate than volumetric flow sensors for determining the quantity of intake air in each cylinder. (Seestoichiometry and ideal gas law.)

There are two common types of mass airflow sensors in use on automotive engines. These are the vane meter and the hot wire. Neither design employs technology that measures air mass directly. However, with additional sensors and inputs, an engine's ECU can determine the mass flowrate of intake air.
Both approaches are used almost exclusively on electronic fuel injection (EFI) engines. Both sensor designs output a 0.0-5.0 volt or a pulse-width modulation (PWM) signal that is proportional to the air mass flow rate, and both sensors have an intake air temperature (IAT) sensor incorporated into their housings for most post OBDII vehicles. Vehicles prior to 1996 could have MAF without an IAT. An example is 1994 Infiniti Q45.
When a MAF sensor is used in conjunction with an oxygen sensor, the engine's air/fuel ratio can be controlled very accurately. The MAF sensor provides the open-loop controller predicted air flow information (the measured air flow) to the ECU, and the oxygen sensor provides closed-loop feedback in order to make minor corrections to the predicted air mass.

HOW TO CLEAN- Follow this youtube link
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CCoQtwIwAQ&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D_TO7ZC5N-aA&ei=NoFHVfzDJ4HhgwTGuYCwAw&usg=AFQjCNGzC-DvHLC2ZmSpzMK1Uutl4VVg0A&sig2=DsKgMvmolf4ugVDz0ZXbxQ

May 04, 2015 | Chevrolet Impala Cars & Trucks

3 Answers

2003 Nissan Altima 2.5L Service Engine Soon Light is on, Auto Zone says codes are for MAF and O2 Sensors. Car hard to start after driving a while but when starts appears to run smooth. Auto Zone thi


ok lets start with the codes they say your getting. P??? which 1's and how many. there are few o2 sensors, are they next to the Exhaust next to the converter? MASS AIR FLOW -MAF use this, for now i am guessing, until i see the correct codes your are getting. this could be the 1 you may have below, please read it........
  • P0103
    Mass Air Flow Sensor Circuit High Input
  • Possible causes
  • Faulty mass air flow sensor
    - Intake air leaks
    - Dirty mass air flow sensor
    - Dirty mass air filter
    - Mass air flow sensor harness is open or shorted
    - Mass air flow sensor circuit poor electrical connection
  • Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.
  • possible symptoms Engine Light ON (or Service Engine Soon Warning Light)
    - Engine stall
    - Engine running rough
    - Excessive fuel consumption
    - Excessive smoke
  • the code is generated when An excessively high voltage from the sensor is sent to Engine Control Module (ECM).
2003 NISSAN Altima Sedan OBDII Codes List

Oct 22, 2014 | 2003 Nissan Altima

1 Answer

Spare part 12(po100)


P0100 NISSAN - Mass Air Flow Sensor Circuit Range/Performance Error

Possible causes- Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks
- Faulty mass air flow sensor
Tech notes Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.

Sep 25, 2012 | 1997 Nissan Pickup

1 Answer

95 mercury i replaced tps and mass flow air and car running for 10 min now wont start at all


I would check for trouble codes in the computer and fuel pressure next.
You need to figure out if you are dealing with a no spark or low fuel pressure issue to proceed.

Aug 14, 2012 | Mercury Cars & Trucks

1 Answer

ISUZU TROOPER 3.2 V6 CODE P0101


P0101 ISUZU - Mass Air Flow Circuit Performancexicon.jpghttp://engine-codes.com/p0101_isuzu.htmlForum CodePossible causes- Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks
- Faulty mass air flow sensor
Tech notes Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor

Jul 04, 2012 | 2001 Isuzu Trooper

3 Answers

DTC Code P0107


P0107 -- CONTINUOUS
Continuous diagnostic trouble code P0107 indicated barometric pressure out of range low was detected during normal operation.

Possible cause
- faulty internal BARO sensor (PCM)

Perform KOEO On-Demand Self Test.
Is P0107 present?
Yes, REPLACE PCM. CLEAR DTC and RETEST.
No, P0107 is intermittent fault. CLEAR DTC. If DTC reappears, REPLACE PCM.

If you keep getting it, a new PCM is the only fix.

Sep 21, 2011 | 2001 Ford F350 Super Duty SuperCab

1 Answer

Car quits running after warming up codes that come up are po135 02 sensor heather bank 1 sensor 1 and po101 mass air flow a circert ran of performance


the o2 heater circuit won`t cause a quit running problem.however a mass air flow problem will.i would check the voltages at the connector and compare to specs and also condition of the connection.these have a problem with a small amount of dirt covering the mass sensor wire.if you clean the wire from both sides dry it and re-install this may cure your problem with the code.if the voltages are not in spec then the mass air flow sensor is defective.the code for the o2 voltages needs to be checked and the connector for corrosion if the voltages are good and connector is good to the o2 then you have a bad o2 sensor

Mar 02, 2011 | 1999 Buick LeSabre

2 Answers

1999 gmc yukon obd11 codes po101 po171 po174 po429 what could be the causes


ok heres problem 101 is mass air flow sensor 171 running too rich 174 running too lean can find 429 but it the same lines i believe take out your mass air flow sensor and clean it check it connection if comes back on replace the mass air flow sensor

Sep 24, 2010 | GMC Yukon Cars & Trucks

2 Answers

1998 bmw 318is e36 - idle is low and switches of when started, when driving accelerator doesnt respond, once warmed up accelerator a bit better, but overall not too smooth, johannesburg south africa


undo mass air flow sensor start moter multiple times if it starts to run fairly normal drive it and see if it comes together then if it does then by a mass air flow light may come on during this but no harm will go out eventually after new piece installed

Jan 28, 2010 | 1997 BMW 318

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...