Question about 1997 Honda Odyssey

1 Answer

Water is coming out need to if its water pump

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

3 posts. ok read 1 post back.
now , you and 1 more phrase, water coming out.
what does that means, say EXACTLY where the AF (water) is coming out. and if dash gauge shows overheating,
do not drive it. you will burn up a $3000 good engine
you will,, so dont.

Posted on Oct 22, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 ford 500 sel the water pump has water coming out of it do i need to replace the water pump or is there a seal or gasket that may have gone bad? That i could replace


Most water pumps have weep holes underneath that direct leaking water downward.
Sounds like you need to replace the water pump and of course get a new gasket. don-ohio

May 21, 2017 | Ford Cars & Trucks

1 Answer

We've bleed we've changed thermostat the water housing tank , in an o4 Sebring what's sign of bad water pump


Noise coming from water pump when engine is running, very slow or virtually no circulation of coolant in the radiator. To hear if the water pump bearing is going out..Take a long screwdriver or tire iron and touch and hold against water pump while engine is running, put ear to other end..works like a stethoscope..just be careful you have it in a steady place on water pump so belt doesn't turn it into a projectile!
if you feel like its the water pump, take serpentine belt off and see if pulley on water pump has any play up or down or front to back, and spin with hand should spin freely...if has play or doesn't spin freely or you can hear, usually a kind of whining noise coming from water pump, it needs replacing. The water pump also has a small hole onthe bottom side, if the diaphragm in waterpump goes bad it will usually have a slow steady drip coming from the hole. Have you had the radiator pressure tested?

Sep 18, 2015 | Cars & Trucks

1 Answer

How can i tell if my coolant leak coming from my water pump


The water pump is in front of your motor. If the coolant is leaking from under the water pump, then the gaskets on your pump need to be replaced. Depending on how many miles you have on your vehicle, you're better off replacing the whole pump, plus the belts and thermostat. Yes, new gaskets come with the pump.

Jan 07, 2014 | 2002 GMC Yukon Denali

1 Answer

Water pumps turns on but o No water comes out of


Sounds like the pump needs priming. There must be a plug on top of pump. Remove this and fill the pump with water to top. Replace cap an turn on. If keeps loosing prime, you either have a fauly nrv, non return valve not opening or you dont have one at all. Essential bit of kit.

Aug 16, 2013 | Cars & Trucks

2 Answers

I think water pump went out, but before all that work was to be done I noticed that I put water in the radiator and once I start the car water comes out from the water pump nipple and alot of water comes...


No it is not a cracked head, your water pump has a pressure hole to give you an indication that the pump is getting there. when the motor is running the pressure builds up and squirts the water all over, resulting in misleading you.

Sep 09, 2010 | 1993 Chrysler Lebaron

2 Answers

My cadillac eldorado etc 98 model needs a water pump pulley i can not find it anywhere does it go by any other name it is over heating and a we called a mech friend and he said it was the water pump and...


The water pump should come with a pulley on it or at least transfer over to the new one if it doesn't come with a pulley. Water Pump Removal and Installation All Engines To Remove:
  1. Before servicing the vehicle, refer to the Cautions and Warnings in the beginning of this section.
  2. Remove or disconnect the following:
    • Coolant into a suitable container
    • Upper filler panel
    • Air cleaner assembly
    • Secondary AIR injection control valve gm_car_cad_sev_wtr_pmp_belt_shld.gif

    • Oil level indicator tube nut
    • Water pump belt shield fasteners
    • Water pump belt shield gm_car_cad_sev_wtr_pmp_drv_belt.gif

    • Water pump drive belt (D) gm_car_cad_sev_rad_outl_hos.gif

    • Radiator outlet hose from the thermostat housing gm_car_cad_sev_wtr_pmp_and_covr.gif

    • Water pump cover bolts
    • Water pump cover
    • Heater return hose
    gm_car_cad_sev_wtr_pmp_pulr.gif

  3. Position suitable water pump puller/installer tool (or special service tool J38816-A) to the water pump locking ears.
  4. Fasten the support plate to the water housing crossover to ensure proper engagement of the tool to the water pump locking ears.
  5. Remove or disconnect the following:
    • Pump from the housing:
      1. Use suitable water pump puller/installer tool (or special service tool J38816-A) to turn the pump clockwise
    • Support plate from the water housing crossover gm_car_cad_sev_wtr_pmp_rem.gif

    • Water pump
    • Seal from the water crossover
  6. Clean the sealing surfaces of the water housing crossover and the pump cover.
  7. Clean and inspect the water pump.
To Install:
  1. Install or connect the following:
    • Seal into the recessed portion of the water crossover
    gm_car_cad_sev_wtr_pmp_crosovr_seal.gif

    NOTE: The notched locking ear must be in the 7 o'clock position.
  2. Index the water pumps locking ears with the tangs in the water crossover.
  3. Position suitable water pump puller/installer tool (or special service tool J38816-A) to the water pump locking ears.
  4. Fasten the support plate to the water housing crossover to ensure proper engagement of the tool to the water pump locking ears.
  5. Turn suitable water pump puller/installer tool (or special service tool J38816-A) counterclockwise.
  6. Torque the water pump
    • Torque to: 74 ft. lbs. (100 Nm)
  7. Remove the support plate from the water housing crossover.
  8. Install or connect the following:
    • Water pump cover to the heater return hose
    • Water pump cover to the water housing crossover
    • Water pump cover bolts
      1. Torque to 89 inch. lbs. (10 Nm)
    • Radiator outlet hose to the thermostat housing
    • Water pump drive belt
  9. Place the water pump belt shield in position.
  10. Install or connect the following:
    • Water pump belt shield fasteners
      1. Torque to 89 inch. lbs. (10 Nm)
    • Oil level indicator tube nut
      1. Torque to 89 inch. lbs. (10 Nm)
    • Secondary AIR injection control valve
    • Air cleaner assembly
    • Upper filler panel
  11. Fill the cooling system.
  12. Start the engine then idle until normal operating temperature is attained.
  13. Recheck coolant level and top off as needed.
  14. Test drive the vehicle.
prev.gif next.gif

Aug 17, 2010 | 1998 Cadillac Eldorado

2 Answers

Water pump pulley


The water pump needs replaced.

May 08, 2010 | 2006 Pontiac Grand Prix

1 Answer

I have an anti freeze leak under my hood its 3 drips 2 coming from the radiator and 1 it seems to be coming from the water pump.would i need to replace the water pump


if the drips are coming from the water pump, than you definitely need a new water pump. if the leaks are coming from the radiator itself and not around an inlet or outlet hose, than the radiator also needs to be replaced as most radiators are cheaper to just replace than fix providing they can even be fixed at all.The web site Radiator Barn has the best deals on radiators that I have found to date.

Apr 05, 2010 | 2000 Dodge Caravan

2 Answers

Paying extra labor to replace water pump when doing a timing belt?


that is true the water pump does not have to come off to change the water pump

Apr 16, 2009 | 2002 Nissan Xterra

Not finding what you are looking for?
1997 Honda Odyssey Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...