Question about 1993 Mitsubishi 3000GT

Open Question

1992 mitsubishi 3000gt intermitently stalls while operating. believe the iac or possibly the ecu are faulty

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
dustyboner
  • 331 Answers

SOURCE: find Mitsubishi 3000GT computer

its under the dash, behind the radio. to get to it, you need to remove the panel on the side of the console.

5a3378a.jpg

Posted on Oct 24, 2008

Ad
  • 2920 Answers

SOURCE: Mitsubishi 3000GT just stopped idling at a stop, car simply dies

sounds like you need a new idler control...take it to a shop and ask them about it to be sure

Posted on Jan 13, 2009

alicantecoli
  • 22156 Answers

SOURCE: Where is the O2 sensor on a '92 3000GT?

1992??? what country are you in beacuse not all vehicles were fitted catalytic converters untill 1992 in europe so it could be you havent got one

Posted on Sep 01, 2009

  • 9 Answers

SOURCE: will 1991 mitsubishi 3000gt door glass fit a 1993

it should. they are both 1st gen. body style. same with a stealth, it will work too.94 is start of the second gen. body

Posted on Feb 16, 2010

  • 94 Answers

SOURCE: what clutch fluid do you use in a 1992 Mitsubishi

Hydraulic clutches use Brake fluid.

Posted on Feb 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

6&3 coil not working put new coil in still not working


CHECK URE PTU POWER TRANSITOR UNIT LOCATED UDER COIL PACKS (LOOKS LIKE A FLAT BOX WITH A SCREW ON EACH SIDE AND TWO ELECT. PLUGS AT BOTTOM THEY CHECK THEM AT AUTOZONE FOR FREE IF NOT THEN CHECK URE ECU FOR BLOWN OR LEAKY CAPICITORS AS THIS IS ALSO COMMON ON THESE CARS IF ECU'S BAD THEN LOOK UP ECU TO GO GOOD PLACE JUST TELL CHRIS ALLEN SENT U

Oct 02, 2011 | 1992 Mitsubishi 3000GT

1 Answer

I have a 1993 mitsubishi gto v6 that once warmed up misses underload between 1500 and 2000rpm ive changed the spark plugs and suspect it might 1 of the coils


IF ITS ONLY MISSING AT THOSE RPMS THEN IT COULD BE A NUBER OF THINGS LIKE CAS BEING OFF, SPARK PLUGS GAPPED INCORRECTLY,FUEL FILTER,FUEL PRESSURE REGULATOR,NO POWER TO AN INJECTOR ,TIMING OFF ,ECU,N YES COILPACK, START SMALL BECAUSE IF IT WAS COIL PACK IT WOLD DO IT CONSTANTLY, N SOMTIMES WHEN ECU IS GOING OUT IT DOES FUNNY STUFF LIKE THAT LIKE NOT LETTIN SOME THINGS WORK AND THROWIN CELLS ON OTHERS N BUY THA TIME U FIG ITS ECU U ALREADY BOUGHT EVERYTHING

Apr 10, 2011 | 1992 Mitsubishi 3000GT

1 Answer

Car works fine for 15- 20 minuts then stalls, try


Are you able to check the ECU for faults. On this car there is an access to the ECU. With the use of an analog multi-meter you can check the ECU for faults; gives you signals like a morse code using dots and dashes with the meter's needle Doing this could lead you right to the problem. With no spark could be the No. 1 Cylinder Top Dead Center is failing; this is within the distributor on the SOHC engine (it uses light pulses thru a rotating disc to establish spark) A long shot being the wire harness. Our son has 93 Stealth with same engine he was having runability problems. It would idle fine and even rev fine in "Park" Once placed in gear it would seemingly sputter and die out. By a stroke of luck one night (no lights on) I saw a small blue spark coming from the wiring to / from the coil. On investigation found the the coil bracket had rubbed thru the insulation on wiring. When in Park it was no problem but once placed in gear the engine would slightly torque and push the bracket in to the wiring causing a short and the engine to die. Any chance you have or can use a meter? I can get you the codes.

Best regards,
Tom

Jun 30, 2010 | 1992 Mitsubishi 3000GT

2 Answers

1991 mitsubishi 3000 hard to start when cold.


Keep in mind, this is a general diagnosis. Your car may not have the parts we list as potential problems. If you're not sure if your car has a particular part, check your owner's manual, service's manual or visit your mechanical service.

d838295.jpg

Hope helped with this. Good luck (remember rated this help).

Nov 19, 2009 | 1992 Mitsubishi 3000GT

1 Answer

My 1992 mitsubishi 3000 gt sl, has problems picking up speed and it doesn't seem to want to switch out of 2nd gear. What could be the problem?


im not sure the problem. but i took the ecu and tcu outta mine and it worked for a lil wile. then it was fixed for good then it wont shift outta 3rd when od is off and it stays n 3rd when od is on. any help would b great.

Oct 05, 2009 | 1992 Mitsubishi 3000GT

1 Answer

The two center spark plugs are dead on a 1992 stealth


sounds like a bad ground or a bad connection someplace.

Mar 08, 2009 | 1992 Mitsubishi 3000GT

1 Answer

Hi I'm in the uk and I have a *** spec 3000gt and it keeps cutting out, I have checked the earth leads , I believe its an electrical problem because all the vacuum valves at the bulkhead are switching on...


If you're gettign a lot of clicking, it coulod be your ECU. Go to 3si.org and do a search for ecu replacement. It's located in your centre console. The 92-94s had capacitor problems, but yours is much later, so without more information, it's hard to fully diagnose your problem.

Jan 14, 2009 | 1999 Mitsubishi 3000GT

1 Answer

Find Mitsubishi 3000GT computer


its under the dash, behind the radio. to get to it, you need to remove the panel on the side of the console.

5a3378a.jpg

Oct 24, 2008 | 1992 Mitsubishi 3000GT

3 Answers

1992 ford f150


Possiable IAC valve sticking or faulty TPS.

Jul 04, 2008 | 1992 Ford F150 SuperCab

Not finding what you are looking for?
1993 Mitsubishi 3000GT Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...