Question about Peugeot Cars & Trucks

1 Answer

Peugeot 407 problems

Hi i have peugeot 407 2005 the car started giving me break system faulty 1 month ago so i went to a repair shop and paid around 300 usd to change all the break pads all new back and front ,now the car is giving me 2 massages one is break pad worn and the other one is break system faulty its so annoying and it keep gives me stop sign what to do pleaes help me

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 153 Answers

Hello,

Take the vehicle to Autozone, Oreilly's, NAPA, they will put a "CODE READER" on your vehicle for FREE to help diagnose the problem. They will also show you where the part is on the vehicle and loan tools but they cannot replace the part for you.

Sounds like a sensor either on the pad or on the mastercylinder.

I hope this helps.

Posted on Oct 21, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 24 Answers

SOURCE: need to change rear pads and adjust hand brake on a 407

right the hnad brake is located on the center console at the right of you in america or left if you are are from brittan. pull it=]

Posted on Jun 26, 2008

  • 14036 Answers

SOURCE: Replacement brake pads for 06 Lexus GS 300?

go with standard pads.they wear a little faster than ceramics.but they dont wear down brake rotors.ceramics pads are hard and they cause brakes to squeak.also your car is under warranty with lexus dealership.i would use what they said. because you have future brake problem. they will void out warranty for not using their brakes.

Posted on May 29, 2009

venson101
  • 30 Answers

SOURCE: 407

it is a warning of something fault in your car it is probably with electricity and you cannot know it you must go to a peugeot service center to fix it

Posted on Jun 15, 2009

  • 1 Answer

SOURCE: Peugeot expert van with stuck on brakes

It's the rod that runs from your brake peddle to the marster cylider the links seized up. need To take off and free it up

Posted on Sep 28, 2009

Raysagem
  • 1017 Answers

SOURCE: Peugeot 407 SW 2006 wash wipe, no water coming from front.

The pipe that caries the water come off the connector under the wheel arch, you have to take the wheel off on the side of the water reservoir and the protective lining. Apply a bit of super glue to it, it's not very difficult to do.

Posted on Mar 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Depollution system faulty


Its telling you the cat or the exhaust gas recirculating system has blocked or failed. You need a specialist or dealer to ascertain what part. Its typical French, sorry.

Mar 04, 2017 | Peugeot 407 Cars & Trucks

1 Answer

Solenoid rattle on start up. Goes away immediately on start. V 6 motor


peugeot 407 v6 3.0 very short-time rattling(grinding) noise at ...

? 0:13
https://www.youtube.com/watch?v=ZRJzci7qvNA
Feb 27, 2012 - Uploaded by reza679
peugeot 407 v6 3.0 very short-time rattling(grinding) noise at cold-start, source ... but a friend told me it can be anything else as well (like those solenoids)! ... C6 makes when starting cold - is that a VVT or a valve lifter noise?.

407 [Archive] - Peugeot Forums

www.peugeotforums.com > Peugeot Forums > Peugeot Models
Mar 22, 2011 - Key replacement · Wishbones for 407 · ESP/ASR Faulty · RT4 VIN coding · 407 1.6 2004, Crankshaft pulley.. size, part number.. 407 driver door lock replacement ... Peugeotforums.com Suggestions and Help [Archive ...
Mar 24, 2011
General Discussion [Archive] - Page 4
Mar 21, 2011
More results from www.peugeotforums.com

Jan 26, 2016 | 2006 Peugeot 407 1.6

1 Answer

Hi sir , i have problem in my car code p0410 and i checked co2 its 14.8 and high what is the part need to check or change


code p0410 refers to secondary air injection(AIR) system---malfunction====causes --wiring---AIR valve---AIR solenoid---ECM
check /replace the air solenoid and/or valve.

Jan 01, 2014 | 2005 Peugeot 407 2.2

1 Answer

HI , i have peugeot 407 2005 one month ago started to give me break system faulty so i went to a repair shop and changed all the break pads front and back all new costed me 300 $ , now the car is giving me...


If in fact the shop DID replace the pads on the car, I'd take it back to them ASAP or it could be that the BCM (brake control module) is malfunctioning. Take it back to the shop, let them look it over and see if the problem is something they did. If it's a large well known shop then they should be honest with you. If it's a small hole in the wall type shop that you used because you were trying to save money, then run. Take it to the dealer and let them fix it. If it is the BCM, be prepared to spend upwards of $1000 for the new module and labor.

Oct 21, 2013 | Peugeot Cars & Trucks

2 Answers

I have a peugeot 307 1.6 2001 model and i have problem with my a/c. One year ago i went to a mechanic to fill it up and one month after it stops giving me cold air. I went back and he told me that i have a...


Go to five more shops until you find one who can give you an honest answer. There are many out there. It could be a simple clogged inline orifice or filter. Meanwhile grin and bear it.

Sep 07, 2013 | 2005 Peugeot 307 HDi

1 Answer

Peugeot 407 coupe 2.7 hdi p0069 fault code comes up depollution system faulty


o2 sensor needs to be replaced and computer reset by disconnecting battery negative cable for 1/2 hr then reconnecting. Good Luck!

Oct 20, 2011 | 2005 Peugeot 405

1 Answer

406 wont lock/unlock please help!!!


Switch ignition ON.Press and hold lock button for 10 sec.Switch ign.Off.Remove key from ign. switch.Wait 5 sec.Sinchronization procedure complete.Confirm sinchronization has been successful by locking,double locking and unlocking vehicle. Repeat abuve procedure to sinchronize any remaining key.Good luck

Nov 30, 2009 | 2005 Peugeot 405

1 Answer

407


it is a warning of something fault in your car it is probably with electricity and you cannot know it you must go to a peugeot service center to fix it

Jun 13, 2009 | 2005 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...