Question about Cars & Trucks

Open Question

Df055 card present - Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a fault diagnosed as DF055 on A Clio 2012 I Music 1.2 L. Is this linked to the crankshaft sensor and would this cause difficulty in starting and sluggish performance


Fault code description: DF055 Coded line circuit,Short circuit to +12V.Active - this code DF055 is Cylinder 4 injector circuit

Try checking the voltage on the immo wire that connects the immo ecu with the engin ecu this is the coded line. on this wire must be a signal and the Max. amplitude is 5v. if you measure more than 5 volts then check wire or any interference on it . if you dont know where to find the wire then look for pin 59 at engine ecu .

Nov 24, 2014 | Cars & Trucks

1 Answer

DF055, DF095, DF002, DF094


Sorry but im not understanding....Is what you are asking why the lights are staying on?

Aug 16, 2012 | Cars & Trucks

1 Answer

Renault software fault code df102


In Ireland my Laguna was given me problems engine light solutions sorted my issue out with code df055
car is no mow going well enginelightsolutions@gmail.com

Aug 14, 2012 | Renault Laguna Cars & Trucks

1 Answer

Renault scenic code df055


Hi any one in Ireland ( Dublin) with the df505 code engine light solutions sorted it out for me email enginelightsolutions@gmail.com

Feb 13, 2012 | Cars & Trucks

1 Answer

Instruction how to enter radio code mercedes a 160


No code available unless you present vehicle ownership documents at the dealership of your choice.

Dealership is told by Mercedes they could loose dealership if giving out codes without following procedure....and believe me...Mercedes checks from time to time.

The vehicle when new came with a Radio Code card, looked like a credit card, that lots of folk leave in the handbook.

Aug 22, 2011 | Mercedes-Benz C230 Cars & Trucks

1 Answer

MY RENAULT GRAND SCENIC HAS A 'CARD NOT DETECTED' MESSAGE AND I'M STUCK AS TO GET IT GOING. NEED HELP DESPERATELY AS I'D REALLY LIKE THE CAR FOR TOMORROW TO GET TO WORK ETC, ETC, ETC.


It maybe a faulty key card, because the problem you describe is exactly what happens if you insert a brand new un coded key card in to the reader. That is easily checked by trying the spare key card, presuming you have one. The car reader has a 'card present' switch inside it, if that is faulty then the vehicles body ecu may not be 'seeing ' that the card has been inserted. The card reader is not coded to the car, so it is possible to swap one from another car for testing purpose's. try this website to order a key it will save a lot of money i hear. worth looking into. sorry for the problems hope i could help.
www.keyrepair.co.uk

Apr 25, 2010 | Renault Sportwagon Cars & Trucks

2 Answers

I can lock the doors on my 2002 renault laguna but can' unlock them with the key card


I presume you have the grey key card, do you have a second key card with the same problem, and when you press the the unlock button does it feel a bit flat comparison with the lock button, if this is the case then you're going to have to order a new card key from renault.
All working card keys must be present when reprogramming a new card because of the new code entered to immobiliser renders cards not programmed useless.
I Hope I helped to share some light on this matter.

Apr 20, 2010 | 2002 Renault Sportwagon

1 Answer

Card not detected renault megan ll unable to start


Unfortunately your card is faulty if you have a second card it should work if not then you will have to order a new one and have it reprogrammed to your car, all cards must be present when this procedure is needed, a change of code in the immobiliser renders all old cards unprogrammed useless.

Apr 11, 2010 | 2000 Renault 181

1 Answer

Lack of power renault software fault code df055


Fault code description: DF055 Coded line circuit,Short circuit to +12V.Active - this code DF055 is Cylinder 4 injector circuit

Try checking the voltage on the immo wire that connects the immo ecu with the engin ecu this is the coded line. on this wire must be a signal and the Max. amplitude is 5v. if you measure more than 5 volts then check wire or any interference on it . if you dont know where to find the wire then look for pin 59 at engine ecu .

Oct 23, 2009 | Renault Sportwagon Cars & Trucks

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...