Question about Cars & Trucks

1 Answer

I have honda civic 2008 ,guage always show empty i disconnect the conector ,no thing changes i cheek fuse A10 too,well it has other sensor for cluster?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 96 Answers

Digital gauge? your problem is not on the gauge it's your gas tank fuel sending unit, most likely it's faulty and you'll need to replaced it.. if you are a handy man you should be able to replaced it yourself.

Posted on Oct 24, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 21 Answers

SOURCE: 94 honda civic not starting

is there any noise from starter at all?

Posted on Sep 14, 2008

  • 141 Answers

SOURCE: changing oxygen sensor for a 2000 honda civic lx

both are located in the exhaust system. You have to get the car off the ground and follw pipes. You cant miss the O2 sensors.

Posted on Jan 15, 2009

  • 1 Answer

SOURCE: 96 Honda accord 2.2L p0501 speeder meter not

i notice someting was wrong with wireing and it seam very time consumeing the customer did not want to spend too much money on this vehicle

Posted on Sep 19, 2009

  • 438 Answers

SOURCE: how to dismantle console box of honda civic 2008

1.
Alright, let's just jump right into it. Get down and low and at the front of your center console you'll find two clips holding it in. There's one on the driver's side and one on the passenger side.
Okay so now how the *#$@ do I remove those clips? If you pull they don't come out...and if you pry you'll just scratch your console. Here's how: Look carefully and you'll see the center is a little circle. Gentley push it in...voila..off it pops. Repeat this for the other side.
2.
Alright now it's time to head to the back. You should recline your seats all the way forward and slide them up front. This will give you plenty of room to work. Get down low and you'll see a screw holding the back in -- once again you'll find it on both sides.
Simply take your Phillips head screwdriver to the ****** and unscrew it on both sides.
3.
Look carefully and you're going to see that the top of your center console is comprised of two pieces. One that stretches from the front of the console to just behind the shift boot. The second piece stretches from there to the back of the console.
The second piece is what we're going to remove. Here's how to do it. It's only held down by a few clips so all you need to do is pry it up. So whip out your flat head screw driver, or other prying device along with a cloth to prevent your crazy @$$ from prying up the plastic too. Start and the back and pry it up.
4.
You can theoretically now just pull the whole thing straight up. However what I found to be easier was to pry up one side and get your fingers underneath then pull from left to right (or vice versa) to pop off the front clips. The front clips tend to be in stiffer than the ones around the side and rear.
*POP* The entire center piece should now be free!
5.
Now you're able to lift the piece straight up.
Simply slide the piece up and forward taking care not to scratch anything
6.
Alright you'll probably discover you can't quite get it past the brake lever.
Yup...excellent deduction Sherlock..the gear shifter seems to be in the way.
7.
Alright time to move out of the way Mister Gear Shifter
Slide that baby into 1st gear (Make sure you didn't lower your hand brake!!!)
8.
It's free! Now you have room to work!
Okay now that the gear shift is in first...you have room to carefully slide the piece forward and out without scratching anything.
So now that you have the rear piece off, you want to remove the front piece right?
Well as you can see here, all that's holding it in place are these two screws on this panel.
Take your mighty Phillips head screwdriver and go buck-wild on those two screws
You've now successfully removed everything that's been holding the center console down.You should now be able to slide the center console back and forth.
There you should be able to remove it now..and you should see this

Posted on Oct 13, 2009

  • 31 Answers

SOURCE: 1995 Honda Civic fuel gauge stuck onfull.

the fuel level sensor in the gas tank needs to be replaced easy way is a new fuel pump assembly

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Honda Civic and the Heated Seats and the Rear Accessory Socket are not working. The fuses are fine. Could it be disconnected somewhere?


Yes, if the back seat has been pulled out for some reason, it sounds like the multi-pin connector (like a Molex connector) was not re-attached. You'll probably find it under the seat if you pull it out....

Nov 29, 2014 | 2008 Honda Civic

1 Answer

Which fuse controls the windshield washer pump for a honda civic 2009


then one blown out. LOL
09 civic.
it in the glove box, ever read the fuse sections.?
there are 7 civics, which one? hummmmmmmmm
http://justgivemethedamnmanual.com/honda/honda-civic-sedan-owners-manuals/

page 275?
fuse 38 ,washer.... the schematic shows, fuse 10 too.
the FSM covers this best. as always, electrics...
alldata.com, its all there.

Jan 29, 2014 | 2007 Honda Civic GX NGV Sedan

1 Answer

Interior fuse box honda civic lx 2 door 2008


On this website, you find fuse box diagram and description for Honda Civic (2008)

Honda Civic 2008 fuse box diagram Auto Genius

May 16, 2013 | Cars & Trucks

1 Answer

Changed radiator on94 honda civic now car


verify the plug of the fan and the fan switch located in termostat housing, if all are pluged in remove the conector of fan switch and short it with little piece of cable, if fan turn on replace the switch! it cost around $20. if the fan no turn on when short the conector verify if the fan conector have 12v if have it changer the fan motor if not check the fuse.

Jun 01, 2010 | 1994 Honda Accord

1 Answer

Gas guage shows empty... dosen't work at all could it be a fuse?


common problem with dodges they loose there ground up on the gastank you must remove the tank make sure you have a good ground if you do the sending unit in the tank is bad

Feb 25, 2010 | 2008 Dodge Avenger

1 Answer

Fuel gauge not giving the correct gauge level


more likely the fuel gauge in the dash is the problem, you can check this by taking the rear seat out to get to the fuel sending unit, then disconnect the connector while you have the ignition on and see if it change.
if it changes the sender is bad, if it doesn't the cluster is bad.

Feb 23, 2010 | 2002 Honda Civic

1 Answer

Instrument Panel Shuts Off


pull the cluster out and check for soft set coupler check all couplers on the fuse panel one sounds to be soft set or you have a bad ground best to take to a dealer but i work for honda builing civics and it is very comon to find a soft set coupler when we do our checks on line so maybe one has slipped through but it is one of those 2 things i am 99% sure

Sep 26, 2009 | 2003 Honda Civic

1 Answer

I have a 99 honda civic whose temp guage issues


You probably have air in the your cooling system. Air in a closed system will not allow the thermostat to open. Find the high spot in the lines and disconnect and fill with fluid, then run the engine with the radiator cap off and with the a/c on high and see if any bubbles pop up.

Feb 25, 2009 | 1999 Honda Civic

1 Answer

Honda civic 1992 twin carburators model.


I dont know where do you live, but honda civic 1992 don use carburator, they are fuel injection, you can have coolant temp sensor problem, or map sensor problem, run diagnose jumping the diagnose wires loated in the passenger side, kick panell close to the door wall, better get the repair book in the parts store to locate the conector ,and read how you can run the diagnosis

Oct 05, 2008 | 1992 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...