Question about 2009 Buick Enclave

Open Question

How do you remove the 2nd row bucket seats? - 2009 Buick Enclave

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2nd row bench to bucket seats conversion


You can buy a 2008 Tahoe with bucket seats but I'm afraid I cannot find any information about switching out the seats. -------------------------------------------------------------------------------
ELM 327 1.5V USB CAN-BUS Scanner

Apr 03, 2013 | 2008 Subaru Tribeca

1 Answer

Cant remove third row bucket seats sequia


To recline the third row seats in the Ford Flex you should be able to press the control on the side of the seat.


------------------------obd2express.co.uk
http://www.obd2express.co.uk/wholesale/vcm-metal-box-ids-jlr-new-vcm-release.html

Nov 26, 2012 | 2002 Toyota Sequoia

1 Answer

Can I convert my 2nd row seating from two bucket seats to a 3 seater bench in my 2009 Kia Sedona?


Did you ever find a solution to this problem? I too am looking to convert to bench seat in middle row

Nov 04, 2011 | 2009 Kia Sedona

1 Answer

Which is the best way to remove a 1990 toyota hi-ace van engine thru the top or drop it down ?


Try to lift up the whole bucket seats from the drivers side towards the right. Use the back seatbelt to hang the bucket seats. The engine is right inside the front row seats. That is where you can remove the engine thru drop it down..

Jun 29, 2011 | Toyota Passenger Cars & Trucks

1 Answer

How do I remove the headreast from 2nd row seats 01 gmc yukon


the button on the side there the bar pulls out from isn't just for puting the head rest down it is also for removal

Jan 02, 2010 | 2001 GMC Yukon

1 Answer

How to remove 2nd row bucket seats


The manual says to pull the strap or level and "double fold" it. The first time I tried it, the seat stuck. The trick was to do it as a single motion, fold the chair in half and swing the seat up and forward. Don't fold the back down then pull again to get the seat forward, it just gets stuck.

Jul 13, 2009 | 2007 Kia Sedona LX Minivan

2 Answers

I want to make my 1999 Mercury Villager Sport into a cargo loader, with just the front seats kept and the rest of the back empty. How do I remove the other 3 seats? So far, I can't get any of them to budge...


the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.
  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.

Mar 02, 2009 | 1997 Mercury Villager

1 Answer

2nd Row Seat will not attach to floor


EITHER THE SPRING HAS GONE OR THE LITTLE V GROOVE IS TOO BADLY WORN, EASIEST THING IS TO REMOVE SEAT, TURN UPSIDE DOWN TO REVEAL THE PROB, IF IS THE V WORN, SIMPLY FILE THE PROFILE BIGGER

Feb 26, 2009 | 2003 Ford Explorer

1 Answer

Removing the 2nd and 3rd row seats


3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!

Nov 18, 2008 | 2007 GMC Yukon

Not finding what you are looking for?
2009 Buick Enclave Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...