Question about 1998 Chevrolet C1500

Open Question

Replace inside door handle drivers side 1998 Chevrolet c 1500 pickup

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Broken Door Handle on 1998 Chevrolet C1500 PU

carefully use a screwdriver or chisel to pry the interior panel off of the door...it's thin, like an upholstered piece of hard board, held on by plastic ribbed push-studs, every so often. Those studs can be pryed out and pushed in to reinstall many times if you're careful but I did manage to break one on my truck. Of course there is also a couple of screws near the door handle as I recall but they are visible. A small piece of triangular shaped plastic must also be popped / pryed off of the forward window area. I'm drinking right now, but I think you may have to drill out a rivet to remove the old handle assembly but it is really easy, just pick a drill bit about the same diameter as the rivet and drill it till it falls apart. Install the new assembly with a pop rivet of your own. good luck

Posted on Feb 09, 2009

c17hydro
  • 2984 Answers

SOURCE: 2000 Silverado Exterior Door Handle

If you have the panel off, just look up at were the outside door handle is mounted. You need to unbolt the rest of what is left....usually a metric fastner. Next, there should be 2 small access holes, probably covered by plastic sheeting. These holes are for the socket to reach them. There are a few clips that need to be popped loose from the rods but take your time and use a thin flat tipped screwdriver. And when you go to reinstall the new handle, you'll have to manipulate the handle into the door skin or the "hole" where the door handle goes.

Just take your time and you can do this.

Good luck!

Posted on Mar 17, 2009

countrysi248
  • 443 Answers

SOURCE: I need to remove the door panel on my 2004 Avalanche

There are plastic clips that hold the door panel inplace .. First look for any hidden screws near the door handle . there might be a little plastic cover that you need to remove with a small screw driver to find the screws.. look under the handle also to see if there are any hidden screws . next take a flat blade screw driver and start at the bottom corner and try gently prying the door panel off . try to stay close to the plastic clips not to damage them by prying real hard .. once you have snapped them loose all the way around .. lift up on the door panel to remove it from around the window lip and out it should come.. holler if you have any problems.. usually The mirrors on the chevys are up above the panel and there is a triangle plastic cover over it on the inside .. it will pry off also gently and there are 3 nuts there that need to be removed .. use caution these fall behind the door panel ... holler if you need more. Jerry

Posted on Apr 24, 2009

  • 10 Answers

SOURCE: how do I remove drivers side door panel on 1998

i think there are screws around the door handle on the in side that need to be taken off the the rest just pop out

Posted on Feb 01, 2010

  • 12104 Answers

SOURCE: 2007 chevy tahoe driver side door handle will not open door

the linkage behind the handle either the retaining clip broke or popped off need to remove the door panel to check and fix

Posted on Mar 13, 2010

Testimonial: "Thanks I thought it might be a cable or linkage. Much thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Chevrolet 1500 pickup door won`t open from the inside.


inside door handle is common problem..and easy to replace

Jan 06, 2011 | 1998 Chevrolet K1500

1 Answer

Outside door handle and the inside door handles do not open driver's side door.


This is a real problem, it sounds like your latch has broken. the only way to get the door open is to cut a hole in door to get to the latch and replace the door. Sorry for the bad news, you could try removing the case inside but that will get destroyed also and you still cant get to the latch.

Jul 19, 2010 | 2003 Chevrolet Silverado 1500

1 Answer

How do I remove the driver side door panel?


door panel pulls straight out or slides, it is held on by plastic mollies they may break when you take it off be very careful not to break them but you can get replacements if needed. check Chevy dealership. there is also one or two screws one at handle, door panel should slide past door handle at angle.

Feb 16, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

How do I remove drivers side door panel on 1998 Chevy S10 pickup to repair/replace window regulator?


i think there are screws around the door handle on the in side that need to be taken off the the rest just pop out

Feb 01, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

1998 Chevy S-10 truck....driver side door wont open from the inside of the vehicle.


If your button works and the handle doesn't, you are going to have to take the door panel off, you will probably find a clip on the linkage is broken.

Sep 10, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

How to replace inside door handle on passenger on 1998 chevy silv


Remove screw from inside door grab handle. Remove door panel by carefully prying out plastic clips. Drill or chisel off pop rivets holding the handle on. Pull handle out far enough to disconnect linkage and remove handle. Install new handle and secure to metal panel with new pop rivets or sheet metal screws. It may be easier to reconnect linkages by removing the metal panel also.

Apr 11, 2009 | 1998 Chevrolet K1500

1 Answer

Exterior & Interior door handles will not open door


take the panel off and buy a new inside door handle and install it

Jan 13, 2009 | 2003 Chevrolet Suburban 1500

1 Answer

Door handle replacement for 1997 Chevy pickup


Are you looking for a replacement procedure or the replacement handle?

Nov 20, 2008 | 1997 Chevrolet K1500

2 Answers

1998 chevy truck 1500 door latches


The handle mechanism wears over time. I went on eBay, bought a color matching handle for under $20 and replaced it myself. You have to be careful when removing the plastic panel bezel that surrounds the handle, drill out two rivets and your door will open like new!

Jun 04, 2008 | 1998 Chevrolet K1500

Not finding what you are looking for?
1998 Chevrolet C1500 Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...