Question about 1997 Mercury Grand Marquis

Open Question

Hubcap removal 1997 mercury grand marquis tool #28407 sunex

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 87 Answers

SOURCE: rear shocks on a 1996 Mercury Grand Marquis

2 bolts on the top of shocks and 1 bolt on the bottom but the top 2 bolts are a pain in the neck

Posted on Mar 10, 2009

  • 1 Answer

SOURCE: How do I replace the front turn signal bulb

unscrew the headlight bezzle (there are four or six screws) pull the bulb casing out, twist out the old bulb and insert the new one.

Posted on Oct 20, 2009

  • 564 Answers

SOURCE: how to replace starter +1993 Mercury Grand Marquis

disconnect battery,,jack car up,,put jack stand on frame,,take starter bolts out,(may not be easy),,take wires off starter,,hoped it helped,,

Posted on May 08, 2010

ZJLimited
  • 17970 Answers

SOURCE: Need to change flasher relay in 1997 Mercury Grand

From the 1997 Mercury Grand Marquis 4.6L SFI 8cyl repair manual, the Flasher is located behind left side of instrument panel. The turn signal and emergency flashers are attached to the interior fuse panel. They are replaced in the same manner as the fuses and circuit breakers.

5f9d86d.jpg

Fig. 6: 1995-97 models interior fuse box locations (click for zoom)

Hope helps (remember rated this).

Posted on Jul 13, 2010

thefifthpowe
  • 10 Answers

SOURCE: 2001 mercury Grand Marquis won't start engine

I have had that problem with my 98 Dodge Ram 1500. It was the Crank Shaft Position sensor.. If you do it yourself make sure you disconnect the positive battery cable from battery for couple hours to let the computer drain any electricity it may store. So it can rest the computer. I didn't do that and couldn't figure out why it still wouldn't start. Until I asked a mechanic.

Posted on Feb 01, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to adjust rocker arm on a 1997 Mercury Grand Marquis


the bolt in the middle of it is not an adjustment its just torqued down tight .
the oil in the lifter is the auto adjustment . if its tapping then the issue is the lifter is bad or stuck. you have to remove the head to take it out . if you do . then do them all. if you cam is worn out it will have marks an rounded as will the lifter bottom.

May 03, 2015 | 1997 Mercury Grand Marquis

1 Answer

How to remove headlight assembly on 1997 mercury marquie


inside the hood--should be four post with removable nuts-comes out the front

Feb 10, 2015 | 1997 Mercury Grand Marquis

1 Answer

Hubcap removal tool, is it necessary for a 1995 Mercury Grand Marquis?


There are about 8 different keys. Each one is the same size, but the notches are in different places much like a house key.
And a standard size metric socket is either 16mm or 17mm.
If the bolt is on tight enough that you can' t turn it with any socket, you will need to drill out the bolt, or cut a hole around the bolt with a hole saw. You also may be able to take a chisel or hacksaw and notch the bolt and use a flat bladed screwdriver.
You might be able to use a star socket if you had one.

Jul 29, 2013 | 1995 Mercury Grand Marquis

2 Answers

Where is the water outlet on a 1997 Mercury Grand Marquis


What they mean is the water coolant hoses connected to the inlet manifold these will need to be removed as part of the job l can`t fore see any major problems it`s pretty striaght foward..

Jan 05, 2013 | 1997 Mercury Grand Marquis

1 Answer

Can't find radiator drain on 1997 mercury marquis


It may not have one.
If there is no fitting on the bottom or the back side of the tanks, you would need to remove the lower hose to drain it.

Sep 21, 2012 | 1997 Mercury Grand Marquis

1 Answer

1997 mercury grand marquis. no distributor. all


Down load a service manual for your vehicle from this website


http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

May 02, 2010 | 1997 Mercury Grand Marquis

1 Answer

How do you change an idler pulley on a 97 mercury grand marquis


Using either a serpentine belt tool or a long ratchet and a socket on the tensioner pulley bolt, turn the tensioner to relieve tension and pop the belt off. Remove the idler pulley bolt and replace the idler pulley. To finish it up simply reinstall the belt.

Feb 12, 2010 | 1997 Mercury Grand Marquis

1 Answer

How do you remove windshield wipers on a 1997 mercury grand marquis?


If your'e just removing the wiper blade, check for a "release lever" where the wiper attaches to the arm, push (or pull) the lever and pull down on the blade at the same time. Do the opposite to install, except you do not have to push the release lever.
If you are removing the whole arm, there is a special tool that you slide under the arm that releases it from the 'gear'.

Nov 07, 2009 | 1992 Mercury Grand Marquis

Not finding what you are looking for?
1997 Mercury Grand Marquis Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

fordexpert

Level 3 Expert

5471 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...